Vehicles
Sections
95 not categorized PORSCHE 996 REAR TURBOCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 TURBO/GT2 2001-05 - Front Axle/Steering (includes uncategorized and accessory items) FVD512997GT3RST 997 GT3 rear spoiler fits 997turbo includes: deck lid, aluminum upright, 3rd brake light housing and kevlar/carbone wing (l= 145cm, b=28cm, h=7 cm) with end plates. Material: aluminum, fiberglass, kevlar-carbone. Also available with wing blade in fiber (gfk) FVD512997gt3rs tech tip: facelift models (2009- ), the 3rd brake light can usually be assumed. If necessary please order the 3rd brake light 99763105201 separately. The holes for the intake fan on the rear deck lid must be drilled prior to installation (model variations). Please note wing is fixed and is not adjustable. The air inlet of the rear is not included. Please order 99751262592g2x
$6,528.50
Make a selection FVDBSK352944003 Brake service kit contains: - brakediscs - brake-pads - warning contact's
$276.10
Make a selection FVDBSK352993004 Make your next service a breeze with our pre-packaged service kits. Quality means everything to us, so we only source these parts directly in Germany. This kit contains: 2 qty. Rear rotors (original Porsche) 1 qty. Oem set of pads (4 total) 2 qty. Oem brake warning sensors 8 qty. Oem brake pad damping plates (for 28 mm piston)
$984.50
Make a selection FVDBSK352997001 Brake service kit contains: - brakediscs - brake-pads - warning contact's - caliper screws - damping plates
$826.10
Make a selection AP997240 Suspension has always been a specialty of agency power. With the current product list consisting of sway bars, control arms, sway bar links, and more, agency power has finally decided to add one more value to the Porsche suspension line up, the rear adjustable toe links. The stock suspension of the Porsche is a great start, but lacks a lot to improve cornering, adjust proper camber, and dial in the toe. These adjustable toe links are design to give you a more responsive rear end along with the ability to dial in the toe on the rear end more precisely then stock. The cnc machined links are made from 6061 aluminum.they are anodized blue to match other agency power products and then laser engraved with the ap logo...(choose a part on the right to read more) General Fitment911 1998-05911 TURBO/GT2 2001-05 911 GT3 2003-05 911 2005-08 911 GT3 2007-11
$599.95
Make a selection FVD351997GT2CS2 This kit convert's the 997 turbo GT2's / 997gt3 rs pccb rotors to 997 GT3 cup car steel rotors with green cup car pads ( for cars with central lock only ) this system is complete with everything that you need to install. Do not ruin your expensive ceramic brake discs on the track. Get ready for racing with the original and much cheaper Porsche motorsport steel brake discs! What's in the box: 4 x 2-piece brake discs (380 x 34 mm - front / 350 x 28 mm - rear) 4 x wear sensors 8 x cup brake pads (racing green) 8 x screws for brake caliper 8 x damping plates technical tip: also order stainless steel brake lines (FVD b96 355 97) and racebrake fluid (012 145 ca).
$7,260.00
Make a selection FVD50599102MM The moshammer evo 2 front chin spoiler blends a bit of Porsche heritage into its design with canard style winglets. This effective design transforms turbulent air into a more laminar flow, creating added downforce. Porsche active aerodynamics remains fully functional in all 3 positions and the evo 2 chin spoiler secures seamlessly into the factory locations. The evo 2 spoiler's design offers a more aggressive look but also blends perfectly with other design elements like the side skirts and rear spoiler. This is an ideal addition for a leased vehicle or for those looking to return the car to its original appearance in the future. When added to other elements of either the evo rs (991.2 turbo/s) or downforce rs...(choose a part on the right to read more)
$1,386.00
Make a selection FVD51299701MM Rear diffuser for all Porsche 997.1 Carrera models. The mounting is very easy. Plug & play with 3M double tape and 2 screws on the screwing points. Not for models with the turbo | GT2 | GT3 rear bumper
$1,312.30
Make a selection FVD351997TTCS1 This kit convert's the 997 turbo pccb rotors to steel rotors with yellow pagid pads.( only 5-hole, not central lock ) this system is complete with everything that you need to install. Do not ruin your expensive ceramic brake discs on the track. Get ready for racing with the original and much cheaper Porsche motorsport steel brake discs! What's in the box: 4 x 2-piece brake discs (380 x 34 mm - front / 350 x 28 mm - rear) 4 x wear sensors 2 x set ( front and rear ) brake pad set (pagid yellow - rs29 ) 8 x screws for brake caliper 8 x damping plates technical tip: also order stainless steel brake lines (FVD b96 355 97) and racebrake fluid (012 145 ca).
$5,871.80
Make a selection 911051 Porsche 911 ac compressor upgrade kit, 1984-89, lh drive model provides improved integrity with our kuehl barrier hose set, kuehl low- high pressure switch to help protect the system, a new denso factory compressor with clutch, new kuehl drier, complete o-ring kit, along with r134a charge port adapters. you can use either r12 or r134a with refrigerant with this complete kit. all barrier hoses match OEM configuration, have sae sae approved crimped fittings and each hose is labeled so you know where it goes.
$1,097.00
Make a selection 996205350009 Techart sport anti sway bar set Porsche 996 turbo 01-05 General Fitment911 TURBO/GT2 2001-05
$2,293.64
Make a selection 996200270009 Techart coilover suspension kit Porsche 996 turbo 01-05 General Fitment911 TURBO/GT2 2001-05
$8,437.49
Make a selection M500041 Moton club sport damper system Porsche 996 turbo 01-05 General Fitment911 TURBO/GT2 2001-05
$8,166.15
Make a selection RES96400100S1 More low and mid-range torque than our race system with cat bypass. Larger primaries, larger collector, largest diameter tubing on the market. Made for mid-range and top end performance with the added beauty of dual exhaust tips! + 25 hp & + 23 torque - 100 cell hjs tri-metallic race catalytics. -2 1/2 tubing (63.5mm) for max. Power across the rpm range.* -weighs 49 lbs. (22 kg). -German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - aeroquip cone style catalytic connection design to prevent exhaust leaks. -includes aeroquip quick release clamps. -made in Germany by m&m exhaust, gmbh. -dual round 3 exhaust tips -intoxicating flat 6 growl at idle, partial throttle and wide open throttle. P...(choose a part on the right to read more)
$7,403.00
Make a selection 9965224250101C
$6.18
Make a selection 48186346 Utilizing bilstein’s monotube shock absorber design for heat dissipation and ride control, the pss10 coil-over system, evolved from the pss9 system, adds a matched performance spring and threaded ride height adjuster to provide a complete suspension system for your vehicle. General Fitment911 TURBO/GT2 2001-05
$4,129.79
Make a selection STB90P3 This kit was designed to efficiently remove and install the wheel bearing and hub of spindle assemblies. Built-in self centering mechanism and incorporates a roller thrust bearing which lines up straight as an arrow during removal and reinstallation. These kits have a 20 year service history at thousands of repair shops. Every kit comes with a detailed instruction manual and does not require a hydraulic press. These kits are specific to the Porsche models listed. Please call our office for availability. General Fitment928 1978-82928 1983-86 928 1987-91 928 1992-95 911 1989-94 911 1994-98 911 1998-05 911 TURBO/GT2 2001-05 911 GT3 2003-05 911 2005-08 911 GT3 2007-11
$510.47
Make a selection FVD343996TPSS9 Only for vehicles equipped with bilstein suspension pss9/10. General Fitment911 TURBO/GT2 2001-05911 1998-05
$1,886.38
Make a selection 90063110490 911 1989-98 rear side marker bulb View/Change Diagram
From $1.00
Make a selection 99650462490 Known as: wheel-housing liner rear View/Change Diagram
$848.82
Make a selection 99637505403 Known as: transmission mounting rear View/Change Diagram
$77.77
Make a selection 99652221101 Known as: bearing View/Change Diagram
$17.64
Make a selection 99610143570 Bearing for the rear of the engine. Two required per engine. View/Change Diagram
From $20.28
Make a selection
$36.05
Make a selection S715012 Rennline adjustable control arm links solve both these problems. Manufactured from 6061 aluminum and feature a turnbuckle design that allows each arm to be lengthened or shortened as needed to restore proper suspension geometry on a lowered Porsche. The fk teflon-lined rod end bearings ensure precision handling and lock in your car’s alignment settings, ensuring predictable cornering under all conditions. Note: four required per car. General Fitment911 1998-05911 TURBO/GT2 2001-05 911 GT3 2003-05 911 2005-08 911 GT3 2007-11
$236.50
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |