Vehicles
Sections
224 not categorized PORSCHE 993 C LINKSCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 912 1965-69 (includes uncategorized and accessory items) FVD612002 Allows you to quickly disconnect your battery by simply unscrewing the knob. Your car will be immobilized for security and will protect your battery. A separate fuse link is also supplied for the small current draw of alarms, clocks, etc. Installation instructions are included. Sold individually.
$37.40
Make a selection K290XE Manifold conversion for zenith 32ndix. Redline upgrade dual 40-idf weber carbs. Maintains factory linkage with redline levers, re-oilable cotton gauze a/f's. Unleash your 356 or 912 and feel the performance that only weber can deliver. This kit is for off-road and racing use only, and must never be used on the highways of california. General Fitment356 1950-59356 1960-65 912 1965-69
$1,195.00
Make a selection M998058 The wheel storage rack allows for easy off-floor storage of wheels and tires of any size. Folds back against wall when not in use. Adjusts (via simple chain link selection) to the size of the wheel or tire you want to store. Shown with 14" wheels/rims, 15" mounted tires, and 18" mounted tires. Rack has a 250 lbs. Capacity. General FitmentACCESSORY
$145.75
Make a selection FVD612001 Battery switch that allows you to disconnect all battery functions with the simple turn of the removable key. Perfect for racing and motorsports applications. The battery master cut off switch also includes a fused link to allow low drain items like clocks and radios to draw a small current to keep them on. Installation instructions are included. Sold individually.
$28.60
Make a selection FVD33150045 Original rubber replacement bushing (65 shore hardness value) for the rear control arms (camber link and caster link). This bushing cartridge is weather sealed and is crafted in high carbon steel and 7075 t6 aircraft aluminum. Sold individually.
$64.90
Make a selection FVD33150005 Restore proper suspension geometry with this adjustable lower rear control arm. The factory control arm cannot compensate enough when lowering your Porsche, leaving you with as much as ½ inch of toe in. The result is poor handling and rapid tire wear. This kit will provide the additional adjustment needed. The adjusting link has a left and right hand thread on each end. Rotating the link will increase or decrease the overall length of the arm. A precision teflon lined spherical rod end replaces the compliant rubber factory bushing for improved suspension response and feedback, and also reduces toe changes during acceleration and deceleration. Sold in pairs. 1 necessary per car.
$764.50
Make a selection FVD1109114840 This replica high butterfly mfi throttle bodies system is for those looking for ultimate engine performance as well as an authentic rsr engine appearance. This kit keeps air consistently on tap for superior drivability. When the throttle is opened, there is an instant injection of air, providing a sharp, crisp throttle response. This efficient injection frees up more power and compliments larger displacements, high lift cams and full exhaust systems. This kit is engineered, precision machined, flow tested and manufactured in Germany. It is replicated to look as close to the original as possible. Intake trumpets (velocity stacks) are available in your choice of red or black. Includes: 6 individual stacks (48 mm ...(choose a part on the right to read more)
$7,456.90
Make a selection FVD33150003 Rear toe control arms - order in pairs only restore proper suspension geometry with this adjustable lower rear control arm. The factory control arm can't compensate enough when lowering your Porsche, leaving you stuck with as much as ½ of toe in. The result is poor handling and rapid tire wear. This kit will provide the additional adjustment needed. The adjusting link has a left and right hand thread on each end. Rotating the link will increase or decrease the overall length of the arm. A precision teflon lined spherical rod end replaces the compliant rubber factory bushing for improved suspension response and feedback, and also reduces toe changes during acceleration and deceleration.
$218.90
Make a selection WAP05014015 Elegant cuff links with bar in the shape of the Porsche crest. Enamel on 925 sterling silver, partially gold-plated. Dimensions: approx .5 x .75 inches General FitmentACCESSORY
From $110.00
Make a selection 99704460015 Available for tire size 265/40 r 18, 295/35 r 18, or 295/30 r 19. Special low-profile design with fine-link chain for minimal adhesion of ice and snow, these chains are easy to fit. General FitmentACCESSORY
$912.19
Make a selection 99704460007 Available for tire size 265/40 r 18, 295/35 r 18, or 295/30 r 19. Special low-profile design with fine-link chain for minimal adhesion of ice and snow, these chains are easy to fit. General FitmentACCESSORY
$684.18
Make a selection 95504460007 Available for tire size 235/65 r 17 and 235/60 r 18 or 255/55 r 18 and 255/50 r19. Low profile snow chains feature ultra-fine links and require minimal effort for mounting specially designed for the Porsche Cayenne. General FitmentACCESSORY
$833.82
Make a selection K297 Progressive carburetor w/electric choke redline 32/36 progressive carburetor conversion. Kit comes complete with new 32/36 dfev carburetor, manifold, linkage, chrome air cleaner, hardware kit and fully illustrated instructions. This kit is for off-road and racing use only, and must never be used on the highways in california. When switching from fuel injection to carburetors, each kits require a lower-pressure fuel pump (part number run7304815) and a different distributor (part number r0231178009) General Fitment914 1970-76912 1965-69
$606.98
Make a selection 61608012 Carburetor linkage rod , 2 required, fits zenith 32ndix & solex 40pii-4 View/Change Diagram
From $16.50
Make a selection 481292 This is the EMPI hpmx 44 idf dual carb kit for all Porsche 356 and 912 engines. This kit comes with a proven hex bar linkage with aircraft heim joints. Includes aluminum carb spacers and all necessary hardware and gaskets. This kit comes with washable air cleaners, and chrome steel base and cover plate. These carbs come to us now tuned with a stamped indentification. They are actually installed on an engine and ran and tuned to ensure function and operation. Depending on motor rejetting may still be needed for your situation General Fitment356 1950-59356 1960-65 912 1965-69
$595.00
Make a selection 1150002RE These are made with club sport events in mind. They work with stiffer springs and lowering springs (we recommend h&r or eibach) and have a fully threaded body for individual lowering like the original 993 cup suspension. Lowering is adjustable to 35 mm (1.37 inches) sold individually. For matching club sport shocks, please order part # 1150002re for the right and 2 qty. Part # 1150009 for the rear. For a properly spec'd complete kit including front and rear club sport shocks with lowering springs and rear drop links, please order part # FVD33399300.
$517.00
Make a selection 90134378200 High-quality OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 2 necessary per 911 four necessary for 914. Please note: please check the model fitment tab to ensure accurate fitment. View/Change Diagram
From $5.50
Make a selection 1150009 These are made with club sport events in mind. They work with stiffer springs and lowering springs (we recommend h&r or eibach) and have a fully threaded body for individual lowering like the original 993 cup suspension. You will need to run our drop links for the sway bar, part # FVD333900. Lowering is adjustable to 30 mm (1.18 inches) left or right side fitment. Sold individually. For matching front club sport shocks, please order part # 1150002li for the left and part # 1150002re for the right. For a properly spec'd complete kit including front and rear club sport shocks with lowering springs and rear drop links, please order part # FVD33399300.
$382.80
Make a selection 481291 This is the EMPI hpmx 40 idf dual carb kit for all Porsche 356 and 912 engines. This kit comes with a proven hex bar linkage with aircraft heim joints. Includes aluminum carb spacers and all necessary hardware and gaskets. This kit comes with washable air cleaners, and chrome steel base and cover plate. These carbs come to us now tuned with a stamped indentification. They are actually installed on an engine and ran and tuned to ensure function and operation. Depending on motor rejetting may still be needed for your situation. General Fitment356 1950-59356 1960-65 912 1965-69
$595.00
Make a selection
$2.42
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |