Vehicles
Sections
143 not categorized PORSCHE 987 RACING CARSCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 912 1965-69 (includes uncategorized and accessory items) FVD362965005 For a uniform appearance we recommend replacing all 40 nuts. There are 10 per wheel for a total of 40. Sold individually. All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$4.40
Make a selection FVD351997GT2CS2 This kit convert's the 997 turbo GT2's / 997gt3 rs pccb rotors to 997 GT3 cup car steel rotors with green cup car pads ( for cars with central lock only ) this system is complete with everything that you need to install. Do not ruin your expensive ceramic brake discs on the track. Get ready for racing with the original and much cheaper Porsche motorsport steel brake discs! What's in the box: 4 x 2-piece brake discs (380 x 34 mm - front / 350 x 28 mm - rear) 4 x wear sensors 8 x cup brake pads (racing green) 8 x screws for brake caliper 8 x damping plates technical tip: also order stainless steel brake lines (FVD b96 355 97) and racebrake fluid (012 145 ca).
$7,309.50
Make a selection FVD424049C These numeric racing inner caps are a single use part designed to lessen noise inside the cabin. So if you plan to service your cables, or re-install your cables into another vehicle these inner caps will be necessary. Sold as a set of 5. 1 necessary per car.
$14.85
Make a selection K1347 A good upgrade for slightly modified engines. Convert fuel injected 2.0 engines to weber 40 mm (40 idf) dual throat carbs. Each kit contains two carburetors, cast aluminum manifolds, fuel line, clamps and all necessary gaskets. The special mounting hardware for the linkage arms is made from an aluminum alloy casting that is much stronger and more rigid than a thin metal stamping. The throttle arms ride in individually adjustable heim (ball) joints for easier adjustment and smoother throttle response. This kit is for off-road and racing use only, and must never be used on the highways in california. When switching from fuel injection to carburetors, each kits require a lower-pressure fuel pump (part number run7...(choose a part on the right to read more) General Fitment914 1970-76912 1965-69
$1,150.00
Make a selection FVD424053 The perfect complement for a numeric racing short shift upgrade or a factory cable replacement. These numeric racing cables are motorsports quality that enhance the driving experience by providing a direct, mechanical connection to your car. They provide precision gear engagement that works seamlessly with the numeric racing short shift upgrade. Features: larger diameter steel spiral wound cable direct connection to each shift greater reliability precise engagement pre-lubricated for smooth operation billet aluminum and stainless-steel connectors eliminates excessive cable backlash for longevity billet aluminum rod ends thermo plastic jacket warranty included please note: professional installation is recommende...(choose a part on the right to read more)
$535.69
Make a selection FVD51154199 Prevents the hood from accidentally opening at speed and keeps the hood in place should an impact occur. These are genuine Porsche motorsports parts from Germany. Fits front hood / trunk and or the rear deck lid. Sold individually. All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$92.40
Make a selection FVD424052 The perfect complement for a numeric racing short shift upgrade or a factory cable replacement. These numeric racing cables are motorsports quality that enhance the driving experience by providing a direct, mechanical connection to your car. They provide precision gear engagement that works seamlessly with the numeric racing short shift upgrade. Features: larger diameter steel spiral wound cable direct connection to each shift greater reliability precise engagement pre-lubricated for smooth operation billet aluminum and stainless-steel connectors eliminates excessive cable backlash for longevity billet aluminum rod ends thermo plastic jacket warranty included please note: professional installation is recommende...(choose a part on the right to read more)
$535.69
Make a selection K291XE Adapter conversion for solex 40 pii. Redline upgrade dual 40-idf weber carbs. Maintains factory linkage with redline levers, re-oilable cotton gauze a/f's. Unleash your 356 or 912 and feel the performance that only weber can deliver. This kit is for off-road and racing use only, and must never be used on the highways of california. General Fitment912 1965-69356 1960-65
$968.50
Make a selection KEV53112400 For racing cars.
$2,359.50
Make a selection MSPP013 These side stripes give your Porsche a great presence on the street! An original dealer installed item and factory equipment, these stripes look great on vintage cars and gives new Porsche a retro-racing touch. They are easy to install using a little soapy water and masking tape guide line. Stripes are 76.5 inches long. Sold as a set of two, one for each side of your car. General FitmentALL911 1978-83
$85.00
Make a selection PNA503993TU00 Originally adapted to mitigate the ordeals of off-road racing, these stylish front covers are expertly tailored to protect your Porsche from rock chips and other debris. Highest quality bras are lined with soft, flannel backing and edges are bound in felt. Hooks are rubber covered and metal tabs are doubly reinforced. License plate cutouts are provided on all models and an embossed Porsche crest is featured on the front. Check listings for prices and fitments. Specify whether your car is 1996-97 turbo or c2/c4 1995-98
$151.20
Make a selection RES98605000S - + 11 crank hp & + 10 crank torque. - weighs 23 lbs. (10,5 kg). - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - minimal drone for a race system. - designed to work with OEM or aftermarket headers that fit like oem. - dual 2 3/4 (70mm) round tips. - includes sleeves and mounting plates. - made in Germany. - intoxicating growl at idle, partial throttle and wide open throttle. - ecu programming is not necessary. - for manual and pdk transmissions. FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. All of our exhausts a...(choose a part on the right to read more)
$2,643.30
Make a selection BES99126010SOL Our exhaust products are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. Our entire "brombacher" line of exhausts is manufactured by m&m exhaust, gmbh in Germany who is no stranger to Porsche racing exhausts. Each is tested comprehensively for flow rate, thermal stress, resistance to cracking, and longevity. To further ensure quality, m&m use lightweight, motorsports grade, t 316 stainless steel material. Features: polished stainless steel double walled to dissipate heat so discoloration will take longer to appear / easier to polish out includes clamps for installation fits the factory cut outs in the bumper perfectly can be adjusted for...(choose a part on the right to read more)
$660.00
Make a selection RES99701064S Race headers 997 GT3 rsr, stainless steel - + 10 crank hp & + 8 crank torque - total weight is 14.1 lbs. (6,4 kg) FVD is proud to introduce our newest line of Brombacherrace exhaust systems. Brombacher race exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. All of our exhausts are manufactured in Germany and are tested comprehensively for flow rate characteristics, thermal stress, resistance to cracking, and longevity. To further ensure quality, this race system meet's the standards of the fia and is registered with them directly. In addition, Brombacherrace exhausts systems are available for ultimate performance full titanium...(choose a part on the right to read more)
From $4,183.30
Make a selection RES99605000S This muffler replaces the OEM catalytic converters and the OEM side mufflers. Weighs 24.2 lbs (11kg) ecu software is nessesary. Increase power up to 34 hp (26kw ) and 16 lb. Ft (21nm) with software. Includes adjustable tips that can be turned down for track use. All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$2,439.80
Make a selection RES99605100S This muffler replaces the OEM catalytic converters and the OEM side mufflers. Weighs 24.2 lbs (11kg) ecu software is nessesary with 100 cell cats increase power up to 34 hp (26kw (35 hp) and 16 lb. Ft (21nm) with software. Includes adjustable tips that can be turned down for track use. Also available with 200 cell cats. All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$2,658.70
Make a selection RES99605200S This muffler replaces the OEM catalytic converters and the OEM side mufflers. Weighs 24.2 lbs (11kg) ecu software is nessesary with 100 cell cats increase power up to 34 hp (26kw (35 hp) and 16 lb. Ft (21nm) with software. Includes adjustable tips that can be turned down for track use. Also available with 200 cell cats. All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$3,070.10
Make a selection RES99615260SS This muffler replaced the complete exhaust system after the headers. Fits cup headers. Also available with 200 cell cats for GT3 cup cars (res 996 152 60sc). No dme upgrade nessesery. Increase power up to 26kw (35ps) and 21nm all motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
From $2,997.84
Make a selection RES99620060S Race exhaust system 996 GT3, stainless steel, cat bypass with tips facts: - + 25 crank hp & + 19 crank torque - catalytic bypass - includes quick release clamps - made in Germany - dme programming necessary. All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
From $4,240.50
Make a selection RES99625260SC This muffler replaced the complete exhaust system after the headers. Fits cup headers. Increase power up to 26kw (35ps) and 21nm all motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$2,924.90
Make a selection RES99700060S Race exhaust system 997 GT3 cup (2010+ 3.8 l), stainless steel. - header diameter 50mm - tube diameter 70mm after the headers - recommended for engines 450hp+ all motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
From $5,482.40
Make a selection RES99700060S401 Race exhaust system 997 GT3 4.0, stainless steel. - header diameter 55mm - tube diameter 90mm after the headers - recommended for engines 500hp+ all motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$7,478.90
Make a selection RES99700060SGA3 Race exhaust system 997 GT3 cup (2010+ 3.8 l), stainless steel. - tube diameter 90mm after the headers all motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$6,931.10
Make a selection RES99701061S Race headers 997 GT3 cup, stainless steel - + 10 crank hp & + 8 crank torque - total weight is 14.1 lbs. (6,4 kg) FVD is proud to introduce our newest line of Brombacherrace exhaust systems. Brombacher race exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. All of our exhausts are manufactured in Germany and are tested comprehensively for flow rate characteristics, thermal stress, resistance to cracking, and longevity. To further ensure quality, this race system meet's the standards of the fia and is registered with them directly. In addition, Brombacherrace exhausts systems are available for ultimate performance full titanium...(choose a part on the right to read more)
From $2,985.40
Make a selection RES99701063S These work with the cup s rear pipes. All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$2,900.70
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |