Vehicles
Sections
196 not categorized PORSCHE 356 A GEAR BOXCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 914 1970-76 (includes uncategorized and accessory items) 47043708 Bmc air filters, designed and manufactured in italy, were originally developed in association with the ferrari f1 team. Bmc is one of the most recognized brands in the automotive industry and are the most successful filter in many sports categories. Bmc filtration systems give better performance to the engine, both in terms of power and torque without compromising reliability. The bmc filter is a less restrictive, sport air filter that is installed in the factory air box. It allows for increased air flow and more efficient filtration down to 7 microns. Oem filters filter down to 10 microns only. This filter will generate an added 1-4 horsepower. Sold individually. 1 necessary per car.
$107.80
Make a selection 47044208 A less restrictive, drop in sport air filter for the factory air box. Bmc filters deliver over 150% better air flow than stock paper air filters. Lifetime filter element requires no replacement and minimal service. Consider also: bmc cleaning kit part-470 500 355
$113.30
Make a selection 470TW90140 This conical filter from bmc is a twin air (tw) filter design. It creates suction laterally and centrally. It is a universal filter and can be used on most vehicles in place of the original air box (with modifications, if necessary). This filter is not intended for street use and is for racing purposes only. This special bmc filter permits up to 700 ps without deformation. Specifications: universal air filter 90mm flange , 140mm long. Does not include sensor cut out. Sold individually.
$129.80
Make a selection 47085150 This is a universal air filter system that can replace your restrictive air box and filter. The carbon-air box improves the volume of air and increases the velocity. In some applications it can increase horsepower up to 25 ps (23 hp) and will also provide you with better throttle response. It is a universal filter and can be used on most vehicles in place of the original air box (with modifications, if necessary). This filter is not typically intended for street use and is designed for race use. Not for Boxster s, 993tt, GT2! Please note: sold individually. Dual intake systems will require two units. Specifications: 85mm, does not include a sensor cut out.
$354.20
Make a selection 846R9003 Material: tig welded, type 304, stainless steel. Finish: satin finish stainless. Weight: 6oz. Models: 996/997, Boxster, 911 & 944. Installation: secures snap-in lap belts to outside seat belt mounting point. Miscellaneous: allows user to remove and install belts in seconds. Will not interfere with factory seat belt. One pair will work for both seats. Use part 846r-9001 for inside belt mount.
$112.20
Make a selection 91165911900SSI This stainless-steel heater box connecting sleeve is a quality replacement part manufactured by dansk. They offer a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. 2 necessary per car. Please note: for models with automatic heat control (m424 option)
$62.70
Make a selection 95011601254 Made in Germany by sachs to original specifications. Oem disc. Torsion sprung. Weighs: 4.6 lbs. (2.10 kg) discs with torsion springs function as a vibration damper between the engine and gearbox. They effectively lessen the harshness felt during re-engagement. Please note: please check the model fitment tab to ensure accurate fitment.
From $808.50
Make a selection 95504480103 Group 2 + 3 seat for children from 33 - 80 lbs. / approx. 3,5 to 12 years of age. . Porsche child seats can be fitted into position quickly and securely using the standard north american latch fastening system in conjunction with the Porsche child seat fastener system which needs to be installed through your authorized Porsche dealer. Telescopic bars on the child seat lock into place between the backrest and the seat and hold it firmly to the passenger seat. Child seats may only be used in the Boxster, 911 or Cayman on the passenger seat in conjunction with the child seat fastener system. To avoid the risk of injury from a deploying airbag, never place a child age 12 or under in a front seating position without...(choose a part on the right to read more) General FitmentACCESSORY
$303.15
Make a selection 846R9001R01 Material: tig welded, type 304, stainless steel. Finish: satin finish stainless. Weight: 6oz. Models: 996/997, Boxster, 911 & 944. Installation: secures snap-in lap belts to factory tunnel side (inside) seat belt mounting point. Miscellaneous: allows user to remove and install belts in seconds. Will not interfere with factory seat belt. One pair will work for both seats. Note: part# 846 r9002 hardware kit is required for installation in (1985 - 1989) model Porsches. Use part 846 r9003 for outside belt mount.
$69.30
Make a selection 99960701000 Fuses protect your wiring and electrical equipment. If you notice that something is not working check your fuse box first. This is a direct replacement blade type fuse. We recommend traveling with a few spares. Sold individually.
$2.20
Make a selection 99750598390 This is a genuine 997.1 GT3 Porsche motorsports cup spoiler lip. It is a cost-effective replacement for the original GT3 spoilers. It also improves front end downforce. Please be aware that it is lower than the original Porsche spoiler but is far more pliable and more curb friendly. This part is shipped in a smaller box by motorsports to conserve on shipping costs. It is manufactured in polyurethane, so it has memory. Once you receive it just lay it out in the sun for an few hours or slowly and carefully warm it up with a heat gun. Please note: all motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangea...(choose a part on the right to read more)
$239.95
Make a selection FVD332901QDF Helical lsd differential for Porsche 911 is suitable for Porsche with 901 gearboxes, to replace the standard open differential. A direct replacement for the standard Porsche differential. Automatic torque biasing differential enables your car to accelerate quicker and corner faster. The differential powers both drive wheels under nearly all conditions. With an ordinary open differential (standard on most cars), precious power is wasted during wheel spin under acceleration. This happens because the open differential shifts power to the wheel with less grip, along the path of least resistance. The differential, however, does just the opposite. It senses which wheel has better grip, and biases the power to that wh...(choose a part on the right to read more)
$2,013.00
Make a selection BES98215000S The open architecture of this muffler allows for a deeper four-cylinder turbo tone, with plenty of whistling on tap. Coming off throttle from higher rpms exudes a chorus of snarling, gurgling and crackling letting everyone know that this car is not your average 982. + 15 hp & + 12 tq gain. - 2 x 3.5 (90 mm) round tips. - thermal insulation on piping to keep suspension components cool. Withstands up to 2,012 degrees fahrenheit (1,100 degrees celsius). - lower deeper tones than the factory exhaust with far more whistling and gurgling / crackling off throttle. - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - no drone in the cabin. - "aero quip" style motorsport muffler connections t...(choose a part on the right to read more)
$3,367.10
Make a selection FVD20798701 This oil pump is a must for vehicles driven on the track. The issue: the 987.1 Boxster/Cayman from 2005 to 2008 has the factory return oil pump located on the right rear side. On the left side, the return oil pump located in front. So when driven fast in right turns, the oil from the camshaft case (rear left) does not flow back quickly enough into the oil pan. When the oil pan is starved of oil, the oil pump sucks in air and over time the motor will seize. The solution: our tandem return oil pump draws oil from the camshaft housing in (rear left, 3rd cylinder) and feeds it back into the oil pan so that starvation is not created when cornering hard.
$2,744.50
Make a selection FVD721T250 This special service tool was developed for the proper installation of oil seal on flywheel side of crank shaft. Trying to do this task with any other method is risking a total engine failure by way of a damaged oil seal. Applicable: for all 996 & 986 Boxster models.
$297.00
Make a selection FVD10699601 For 986 (Boxster) and 996 modell. Fits left and right side. - specially designed for tuned and motorsport vehicles the racing & high performance division of csf build and engineer the most advanced, efficient, and reliable cooling systems in the world. Csf manufacturers radiators with high performance all-aluminum and direct-fit replacement for racecars. The only high performance manufacture to feature this advanced technology. These radiators are stamped to the same geometry of the application's original plastic end radiators. These tanks feature less welding, and are generally considered the strongest tank designs in the industry.
$548.90
Make a selection FVD20799601 Scavenging and aeration in the oil pan have been identified as a problem in 996 and Boxster models experiencing high g-forces on the racetrack. This oil pan spacer provides a simple solution. This spacer increases sump capacity by half a liter, providing more reserve to ward off starvation. Thisoil pan spacer clears all factory options including the rear skid plate. Added oil capacities as well as increased oil pan surface area increase oil cooling and engine performance. *oil pan and sump baffle are OEM parts and do not need to be purchased material: 6061 t6 aluminum alloy finish: clear anodized weight: n/a models: Boxster, Boxster s, and 996 models (excludes GT3 and turbocharged models) installation: for best...(choose a part on the right to read more)
$283.80
Make a selection BES99720020S Brombacher stainless steel exhaust system for the 997-2 facts: - equal length headers with long tube design - cat bypass - 2 3/4 tubing (70mm) - sealing cone style connections and quick release clamps - 4 x 3.5 (90mm) round tips - made in Germany -+ 28 hp & + 20 lb.-ft torque gain with exhaust system only. - weighs 72 lbs.(33,0 kg). The stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg). Figures: genuine: engine - 6 cylinder boxer capacity - 3800ccm compression ratio - 12,5:1 max. Power - 283kw (385hp) @ 6500rpm max. Torque - 420nm (310lbf ft) @ 4400rpm max. Speed - 300km/h max. Rpm - 7500rpm acceleration 0-100km/h - 4.5s level 3 tuning (includes FVD software, sport airfilter and exhaust) max. Power - ...(choose a part on the right to read more)
$6,425.10
Make a selection 99710601106 High-quality OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. For proper installation, we recommend a water pump gasket. For 987.1 Boxster/s and Cayman/s models please order part # 99710634000. For all 996 / 997.1 models order part # 99610634054 sold individually. 1 necessary per car. Please note: this has the updated metal impeller. Water pumps were originally manufactured with plastic impellers but they would break apart causing issues. The updated metal impeller pumps are a superior product.
From $124.00
Make a selection FVD99110042 +140 crank hp & +155 crank tq gain on the turbo and +100 crank hp & +126 crank tq gain on the turbo s. All while offering ultra-smooth drivability and reliability that you expect from your Porsche. Package includes: - FVD my genius handheld flash tool (included). - FVD tuning software FVD99161840mg. - bmc sport filter 47079801. - FVD sound version muffler (reuses factory catalytic converters) bes99105040s. - FVD headers bes99101040s. - FVD exhaust installation kit (everything needed for simple installation). FVD software power gains: max. Power - 485 kw (660 hp) @ 6500rpm max. Torque - 870 nm (642 lb.-ft.) @ 3750rpm max. Speed - 330km/h (206 mph) max. Rpm - 7200 rpm acceleration 0-100 km/h (0-62.5 mph) - 2.9s g...(choose a part on the right to read more)
$6,378.90
Make a selection FVD351997TTCS This kit convert's the 997 turbo pccb rotors to steel rotors with yellow pagid pads.( only 5-hole, not central lock ) this system is complete with everything that you need to install. Do not ruin your expensive ceramic brake discs on the track. Get ready for racing with the original and much cheaper Porsche motorsport steel brake discs! What's in the box: 4 x 2-piece brake discs (380 x 34 mm - front / 350 x 28 mm - rear) 4 x wear sensors 2 x set ( front and rear ) brake pad set (pagid yellow - rs29 ) 8 x screws for brake caliper 8 x damping plates technical tip: also order stainless steel brake lines (FVD b96 355 97) and racebrake fluid (012 145 ca).
$6,344.80
Make a selection FVD505981SCH Motorsport quality grp (glass-reinforced plastic) front bumper, specifically produced for the early 911 style headlights up to 2001. This will fit all 986 Boxster models however. - produced by a German motorsport manufacturer. - provisions for turn signals are included. - lightweight - made of high strength, grp (glass-reinforced plastic) - includes a sheet of black race mesh for the radiator inlets. Please note: this is a motorsport part that takes time to manufacture and cure properly. Lead times can vary anywhere from 15-30 days depending on where you are in the world. All grp products must properly be fitted and completely prepared prior to paint. They require pre-fitment, filling, sanding, primer and paint...(choose a part on the right to read more)
$1,380.89
Make a selection FVD99710012M +27 crank hp & +22 crank tq gain on the 997.1 3.6 l, while offering ultra-smooth drivability and reliability that you expect from your Porsche. Package includes: - FVD my genius handheld flash tool (included). - FVD tuning software - part # FVD99761810mg - bmc sport filter - part # 47015601 - FVD m&m exhaust gmbh - sound version muffler - part # bes99715001s1 - FVD headers - part # 210111997 - FVD header and muffler installation kit - part # FVDmk997200 and part # FVDmk997001 FVD level 2 tuning: max. Power - 259kw (352hp) @ 7000rpm max. Torque - 400nm (295lbf ft) @ 4500rpm max. Speed - 300km/h max. Rpm - 7500rpm acceleration 0-100km/h (0-62.5 mph)* - 4.7s genuine: engine - 6 cylinder boxer capacity - 3596ccm co...(choose a part on the right to read more)
$6,056.60
Make a selection MB34296 The problem with the original air box, is the "momentum" of air delivered to the engine, as well as ambient temperature around the air intake. The original system picks up a hot air from the 3" opening. Our system involuntarily receives its air without restrictions-360 degrees, right from under the side-open grill. Also note, the engine's power drops 1% for every 10 degree rise in temperature. On larger engines the drop is insignificant. On smaller engines the problem will weaken the engine at higher rpm levels. The performance difference demonstrated by our system is noticeable at higher rpm levels, when more air is required. Using the original “dove tail” screw, our system attaches easily to the same ...(choose a part on the right to read more) General Fitment914 1970-76
$165.00
Make a selection FVD99610053A Kit includes: sport motronic dme exch., sport air filter, sportmuffler TUV, k24-race turbocharger l/r genuine: engine - 6cyl. Boxer twin-turbo capacity - 3600ccm compression ratio - 9,4:1 max. Power - 309kw (415hp) @ 6000rpm max. Torque - 560nm (413lbf ft) @ 3500-4500rpm max. Speed - 305km/h max. Rpm - 6750rpm acceleration 0-100km/h - 4.2s tuning: max. Power - 397kw (540hp) @ 7000rpm max. Torque - 760nm (561lbf ft) @ 4500rpm max. Speed - 331km/h max. Rpm - 7000rpm acceleration 0-100km/h - 3.6s for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the...(choose a part on the right to read more)
$15,193.68
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |