Vehicles
Sections
316 not categorized PORSCHE 356 WE NEED A CARCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 924 1976-79 (includes uncategorized and accessory items) 115385 If you are looking for added damping performance on the street, the bilstein b6 performance damper is the ideal solution. The product benefits at a glance: optimum adhesion and enhanced stability for daily driving and extreme driving situations. Marked improvement in safety and sportiness without additional spring changes. Increased service life. Bilstein gas pressure technology. Bilstein mono-tube/upside-down technology. Made in Germany. Road-tested and fine-tuned by bilstein. German TUV registration is not required. Sold individually. 1 necessary per car. We recommend adding our lowering spring collars if you would like a lower ride height, our part # 115110016
$640.20
Make a selection 115900944018CS Sports suspension for 924 - 944 - 968 only for 18mm spring strut mounting this sports suspension is for everyday use and increase the dynamic and response. The lowering is adjustable (30-70mm front and 30-60mm rear). By using springs at the rear axle instead of torsion bars you improve extreme the handling of your car. By removing the rear torsion bars is the weight saving approximately 25kg.
$3,132.80
Make a selection 115900997BIGT3D Bilstein b16 damptronic not only engine performance but, above all, suspension technology contributes to the fascination of a Porsche sports car. Bilstein offers an range of active coil over systems of the current Porsche models with pasm. The coil over system is electronically adjustable. So pasm-function and car sensors like psm stays fully in function. In addition the height-adjustment offers a certified range of lowering. Discreet sporty looks and precisely defined response within both setup modes, accompanied by high driving dynamics and excellent residual ride comfort. Regardless of whether in daily motoring, on the nordschleife of the nurburgring at the weekend, in training courses or in club sports - it...(choose a part on the right to read more)
$5,330.60
Make a selection 115900997BIT011 The pss 10 suspension kit provides the ultimate in performance tuning. The fully adjustable monotube gas shock absorbers offer a selection of nine precise compression and rebound settings. The front and rear progressive rate springs allow accurate adjustment of the vehicle ride height and center of gravity for the level of performance you seek. Handling and control are just a few twists away. Regardless of whether in daily motoring, on the nordschleife of the nurburgring at the weekend, in training courses or in club sports - it's all pure driving enjoyment! Product advantages at a glance: • bilstein mono-tube/inverted technology • bilstein road tested and tuned • high driving dynamics with g...(choose a part on the right to read more)
$4,345.00
Make a selection 115900997TTCS The ultimate bilstein sport suspension for club racing and street performance! This suspension was developed under real racing conditions by bilstein with double world rally champion walter rohrl. - reduced weight via the use of an integrated reservoir. - 2 way damping adjustment (bound (red) and rebound (blue) independently). - dials with good visibility and scaling (from 1 to 10). - easy to adjust when installed with click screening and color coding. - bilstein mono-tube gas pressure technology. - adjustable aluminum uniball camber plates (rear). - TUV approved. - made in Germany. What's in the box: - adjustable dampers including double springs. - rear uniball camber plates. - spring tensioning key (tool). -...(choose a part on the right to read more)
$7,256.70
Make a selection 115910996031 Bilstein b4 OEM m030 (original m030 suspension) shock absorber set (4 pieces) for cars with lowering springs or cars delivered with factory m030 sport suspension. Nothing is better than the original! The b4 m030 dampers from bilstein are the perfect shock absorber for lowered cars. Facts: - constant damping pressure under load - increased driving stability - increased durability - OEM quality - bilstein gas pressure technology - type/model m030
$1,682.59
Make a selection 115910996034 Bilstein b4 OEM m030 (original m030 suspension) shock absorber set (4 pieces) for cars with lowering springs or cars delivered with factory m030 sport suspension. Nothing is better than the original! The b4 m030 dampers from bilstein are the perfect shock absorber for lowered cars. Facts: - constant damping pressure under load - increased driving stability - increased durability - OEM quality - bilstein gas pressure technology - type/model m030
$1,784.11
Make a selection 115910997002 Bilstein b4 OEM i030 (original i030 suspension) shock absorber set (4 pieces) for cars with lowering springs or cars delivered with factory i030 sport suspension. Nothing is better than the original! The b4 i030 dampers from bilstein are the perfect shock absorber for lowered cars. Facts: - constant damping pressure under load - increased driving stability - increased durability - OEM quality - bilstein gas pressure technology - type/model i030
$2,476.20
Make a selection 115910997006 Bilstein b4 OEM i030 (original i030 suspension) shock absorber set (4 pieces) for cars with lowering springs or cars delivered with factory i030 sport suspension. Nothing is better than the original! The b4 i030 dampers from bilstein are the perfect shock absorber for lowered cars. Facts: - constant damping pressure under load - increased driving stability - increased durability - OEM quality - bilstein gas pressure technology - type/model i030
$2,153.97
Make a selection 12837007R Stoptech recognizes that great brakes need to look as good as they perform. Performance wheels and tires are best complemented with stoptech sportstop cross-drilled or drilled+slotted rotors.every sportstop brake rotor is produced from a high quality centric parts blank casting and finished in a durable e-coating for corrosion resistance. Sportstop drilled and slotted brake rotors (prefix 127) prevent glazing of the pads, add bite and improve wet and dry braking performance.every sportstop rotor is finished with black e-coating on both sides of the hat, inside the the cooling vanes, and on the outside edge. E-coating is a superior electro-statically applied finish designed to withstand 400 hours of salt water e...(choose a part on the right to read more) General Fitment924 1976-79924 1986-88 924 1980-85 928 1978-82 928 1983-86 944 1982-85 944 1985-88
$203.90
Make a selection 150BA79185 Increase the horsepower of your 914/6 or 916 with bursch performance headers. They have been dyno, track and street tested since 1958. Bursch headers are available in a variety of diameters to suit your displacement and driving preference. Each hand made header is mandrel bent from durable 16-gauge steel and is coated with 1,200-degree high temp paint. Features: increased horsepower and torque weight savings 16 gauge steel coated in 1,200 degree high temperature paint sold as a set (left and right). 1 necessary per car. Please note: this replaces your stock heat exchangers and does not include heat. These headers do not include provisions for o2 or temperature sensors. Use of this product for purposes other tha...(choose a part on the right to read more)
$1,335.40
Make a selection 150BP264 Book description: publication date: january 15, 1999 inside this manual you will find routine maintenance, tune-up procedures, engine repair, cooling and heating, air conditioning, fuel and exhaust, emissions control, ignition, brakes, suspension and steering, electrical systems, and wiring diagrams.
$108.90
Make a selection 150TB1126 High-performance, direct replacement torsion bar set that allow you to dial in the correct spring rate for street or track use. Features: manufactured from aircraft grade, 4340 alloy steel heat treated for increased strength and durability powder coated to resist corrosion consistent outside diameter and rate for consistent spring rate made in the usa by sway-a-way sold as a set. 1 necessary per axle.
$328.90
Make a selection 150TB2129 High-performance, direct replacement torsion bar set that allow you to dial in the correct spring rate for street or track use. Features: manufactured from aircraft grade, 4340 alloy steel heat treated for increased strength and durability powder coated to resist corrosion consistent outside diameter and rate for consistent spring rate made in the usa by sway-a-way sold as a set. 1 necessary per axle.
$603.90
Make a selection 210111011D1 Improve sound and performance by decreasing exhaust backpressure with this catalytic bypass pipe. This is a painted steel bypass pipe, manufactured by dansk. They offer a complete line of tuning and performance parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment manufacturers (oem) to Porsche in Germany. - + 10 crank hp. - lower, deeper, more exotic exhaust note. - steel coated with high temperature paint. - made in europe by dansk. - reduces back pressure and thermal load on the engine. - includes o2 sensor bung....(choose a part on the right to read more)
$306.90
Make a selection 21011124OK Catalytic bypass pipe "u-torque" design, manufactured by m&m in Germany. The u-torque design compensates for the backpressure loss while running without cats. The design minimizes the loss of low end torque and adds 10-15 ft-lbs of torque in the mid and top range of the rpms. Why settle for the traditional cross over cat design when you can add torque in the mid-range and minimize the loss of torque down low where the 997's need it most! Ecu software is necessary !
$1,094.50
Make a selection 21011196402 Say good bye to the days of having to weld and cut aftermarket sport cats to make them fit! We have our sport cats made in Germany to our specifications and that means that these are 100% bolt on without issue! - + 10 crank hp & +6 crank torque. - 200 cell, tri metallic German hjs sport catalysts. - large volume o 105 mm (4.1 inch diameter) high flow cat. - exhaust hanger brackets are included so that the heat shield does not have to be removed. - weighs 7.2 lbs. (3,2 kg). - direct bolt on replacement. - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - reduces backpressure and thermal stress. - made in Germany. - more distinguished flat 6 growl at wide open throttle. The FVD 200 cell...(choose a part on the right to read more)
$1,593.90
Make a selection 22011090102ATK Sport throttle bodies are a great addition for those with highly modified cars. They are a great addition for those with full exhaust systems (larger diameters), maf kits, larger displacements, street or race cams, etc. The remanufacturing process includes full inspection of your throttle body to ensure proper operation after the remanufacturing process. We then disassemble and bore the original to a 2.7-inch (70.5 mm) diameter. The entire throttle body is cleaned, degreased and the internals are polished to create more laminar flow. We then machine the shaft to accept larger butterfly's which seamlessly match the bore. All clearances are checked for precision to ensure reliability. Each throttle body is reman...(choose a part on the right to read more)
$589.60
Make a selection 220110932ATK Sport throttle bodies are a great addition for those with highly modified cars. They are a great addition for those with full exhaust systems (larger diameters), maf kits, larger displacements, street or race cams, etc. The remanufacturing process includes full inspection of your throttle body to ensure proper operation after the remanufacturing process. We then disassemble and bore the original 2.4-inch (63 mm) to a 2.6-inch (66.5 mm) diameter. The entire throttle body is cleaned, degreased and the internals are polished to create more laminar flow. We then machine the shaft to accept larger butterfly's which seamlessly match the bore. All clearances are checked for precision to ensure reliability. FVD thrott...(choose a part on the right to read more)
$485.10
Make a selection 22011098100 FVD Brombacherhas a long tradition of offering high quality, extensively tested, easily installed tuning products that offer proven performance. Those high standards naturally led us to the innovative pro design (ipd) plenum product. The ipd patented cast aluminum intake plenum with the larger 82 mm (gt3) throttle body (competition plenum) increases horsepower and torque by optimizing and increasing airflow into the intake manifold. But in order to capitalize on all the performance gains the ipd competition plenum can deliver, you must strike a balance with exhaust components and software. You cannot simply add the ipd competition plenum on the 981 series and expect large gains. But, no need to worry, the FVD ...(choose a part on the right to read more)
$1,529.00
Make a selection 22011099706 The 997 turbo ipd "y" pipe was built for the more demanding turbo performance customer. The factory y pipe becomes restrictive when adding substantial power gains. The ipd "y" pipe has larger inlets and an optimized diversion area allowing for even greater power gains. This superior and more efficient design flows 126 more cfm than the factory y pipe delivering the additional power needed to raise the performance bar on any turbo. The ipd "y" y pipe is designed to be a direct replacement of the factory OEM y pipe. There are no modifications or fabrication required for installing the ipd y pipe. This is an easy and straight forward r & r (remove and reinstall) bolt on upgrade. Note: contains everything nec...(choose a part on the right to read more)
$1,094.50
Make a selection 240600100 Waterproof cloth tape for reliable sealing, masking or concealing of racing fender benders. High initial tack and extremely good adhesion. Pe coated cloth tape, waterproofed. Excellent for repairs, crafting and fixing. Extra strong adhesion, which also allows installation on uneven surfaces. 50 mm wide x 50 meters long.
$18.70
Make a selection 240991351GV Pagid is one of the leading manufacturers for asbestos free racing brake pads and offers compounds for every Porsche. The correct brake pad can make the difference between winning and losing. Pagid race pads are only for racing. Correct brake-in after refreshing the brake pads: * 3 to 4 brake applications with medium pedal pressure from 100 mph to 50 mph. Allow 900-1500 feet cooling time between brake applications. * 2 to 3 brake applications with harder pedal pressure from 110 mph to 60 mph. Allow 1500 feet cooling time between brake applications. Avoid wheel lock-up and abs. * 1 to 2 in-between clean-up brake applications. Do not allow the brake pads to overheat during the break in period. Rsl29/yellow: featu...(choose a part on the right to read more)
$657.80
Make a selection 240600110 Waterproof cloth tape for reliable sealing, masking or concealing of racing fender benders. High initial tack and extremely good adhesion. Pe coated cloth tape, waterproofed. Excellent for repairs, crafting and fixing. Extra strong adhesion, which also allows installation on uneven surfaces. 50 mm wide x 50 meters long.
$27.50
Make a selection 240600103 Waterproof cloth tape for reliable sealing, masking or concealing of racing fender benders. High initial tack and extremely good adhesion. Pe coated cloth tape, waterproofed. Excellent for repairs, crafting and fixing. Extra strong adhesion, which also allows installation on uneven surfaces. 50 mm wide x 50 meters long.
$18.70
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |