PORSCHE BOXSTER ROD BOLTCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 924 1980-85 - Body (includes uncategorized and accessory items) HEI993001009A Heigo motorsports has been building extremely safe roll cages and roll bars for the Porsche vehicles for 30+ years. They have also produced countless factory and motorsports bars and cages for the marque over the years. We purchase their bars because they have a long standing history with the fia and dmsb in Germany. They have hundreds of approval certificates to their name and maintain a meticulous safety record. Facts: bolt-in bar only weighs 22 lbs (10 kg) aluminum 1.5-inch diameter tubing, .098 wall thickness tubing. Bars which connect to the main hoop, use a connecting joint system. Aluminum finish. Primarily for street use as a harness bar is not an option. Please note: these bars are hand made to order. ...(choose a part on the right to read more)
$1,760.00
Make a selection FVD98010002 Kit includes: 2 x sport motronic dme (ecu) exchange 2 x sport airfilter 1 x sport exhaust system genuine: engine - v10 cylinder capacity - 5733ccm compression ratio - 12,0:1 max. Power - 450kw (612hp) @ 8000rpm max. Torque - 590nm @ 5750rpm max. Speed - 330km/h max. Rpm - 8400rpm acceleration 0-100km/h - 3.9s tuning: max. Power - 496kw (675hp) @ 8000rpm max. Torque - 670nm (495 lbf ft) @ 6000rpm max. Speed - 345km/h max. Rpm - 8600rpm acceleration 0-100km/h - 3.7s FVD dme / ecu programming philosophy: for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. ...(choose a part on the right to read more)
$17,032.10
Make a selection FSPOR992SC Purchase disclaimer: fabspeed motorsport does not condone the use of emission defeat devices for any vehicles used on public streets or roadways. Fabspeed motorsport will not tamper, remove, disable, or bypass emissions equipment on a motor vehicle in accordance with 40 cfr section 86.1854.12(a)(3), clean air act 40 cfr 1068.101(b). This includes software, known as tunes, that reprogram a motor vehicles electronic control module to alter engine performance and enable the removal of filters, catalysts, and other critical emissions controls.
$3,695.95
Make a selection SESDP924 Safety devices 6 point competition bolt-in roll cage kit offered by stable energies includes: bolt on door bars, harness bar and diagonal. Optionally, the diagonal is offered in a non-removable version. Please refer to the part number to specify correctly when ordering. The bolt on harness bar is offset towards the rear to allow full movement of the front seats. This harness bar also incorporates shoulder harness guides which locate the shoulder harnesses on the harness bar. For the club racers, a seat back brace can be attached to the harness bar as well. General Fitment924 1976-79924 1980-85 924 1986-88 944 1989-91 944 1985-88 944 1982-85
$1,361.25
Make a selection FVD721T319 This adaptor ring is specifically designed to mate the engine case straight to any universal engine stand, using four 3/8 bolts, allowing for a full 360 degree motion of the motor. Bolts up to every Porsche engine ever produced. Machined with all the necessary reliefs and/or notches to allow for clearance of all engine parts including the flywheel and its respective lock tool.
$214.50
Make a selection HEI911001003S Heigo motorsports has been building extremely safe roll cages and roll bars for the Porsche vehicles for 30+ years. They have also produced countless factory and motorsports bars and cages for the marque over the years. We purchase their bars because they have a long-standing history with the fia and dmsb in Germany. They have hundreds of approval certificates to their name and maintain a meticulous safety record. Facts: bolt-in bar chromoly steel 1.5-inch diameter tubing, .098 wall thickness tubing. Bars which connect to the main hoop, use a connecting joint system. Tig welded. Retains full seat adjustability. Semi-gloss black finish. Cost effective for club sport use. We recommend adding the harness bar, part...(choose a part on the right to read more)
$1,284.80
Make a selection HEI964001005S Heigo motorsports has been building extremely safe roll cages and roll bars for the Porsche vehicles for 30+ years. They have also produced countless factory and motorsports bars and cages for the marque over the years. We purchase their bars because they have a long-standing history with the fia and dmsb in Germany. They have hundreds of approval certificates to their name and maintain a meticulous safety record. Facts: bolt-in bar - screwed in to the original seat belt points chromoly steel 1.5-inch diameter tubing, .098 wall thickness tubing. Bars which connect to the main hoop, use a connecting joint system. Tig welded. Retains full seat adjustability. Semi-gloss black finish. Cost effective for club sport ...(choose a part on the right to read more)
$1,284.80
Make a selection SESDP944W Safety devices 6 point competition bolt-in roll cage kit offered by stable energies includes: bolt on door bars, harness bar and diagonal. Optionally, the diagonal is offered in a non-removable version. Please refer to the part number to specify correctly when ordering. The bolt on harness bar is offset towards the rear to allow full movement of the front seats. This harness bar also incorporates shoulder harness guides which locate the shoulder harnesses on the harness bar. For the club racers, a seat back brace can be attached to the harness bar as well. General Fitment924 1986-88924 1980-85 924 1976-79 944 1989-91 944 1985-88 944 1982-85 968 1992-95
$1,934.79
Make a selection 80312 For use on camshafts, lifters, pushrods, piston skirts, main and rod bearings, and bolt threads. Excellent rust and corrosion inhibitor, allows for long-term storage. General FitmentALL
$8.75
Make a selection 91410317101 High-quality OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 12 necessary per car.
From $20.90
Make a selection FVD103975991TC
$2,952.40
Make a selection HEI964001006A Heigo motorsports has been building extremely safe roll cages and roll bars for the Porsche vehicles for 30+ years. They have also produced countless factory and motorsports bars and cages for the marque over the years. We purchase their bars because they have a long-standing history with the fia and dmsb in Germany. They have hundreds of approval certificates to their name and maintain a meticulous safety record. Facts: bolt-in bar - screwed in to the original seat belt points. Chromoly steel 1.5-inch diameter tubing, .098 wall thickness tubing. Bars which connect to the main hoop, use a connecting joint system. Tig welded. Semi-gloss black finish. We recommend adding the harness bar, part # hei600036s to your...(choose a part on the right to read more)
$2,109.80
Make a selection RES99600164S FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. All of our exhausts are manufactured in Germany and are tested comprehensively for flow rate and characteristics, thermal stress, resistance to cracking, and longevity. Brombacher mufflers outer shell dampens and eliminates unwanted frequencies and ensures no resonance or drone in the cabin. The end result is a strong, linear, firing-order dominated flat-6 Porsche sound. In addition, Brombacherexhausts systems are available for ultimate performance full titanium. Our titanium system's are nearly...(choose a part on the right to read more)
From $10,370.80
Make a selection 996SBR • cnc aluminum strut rod
$421.81
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |