PORSCHE 356 C REAR PORSCHE LIGHTCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 930 1975-77 - Body (includes uncategorized and accessory items) 99651290300G2X Rear spoiler only. The carerra aerokit underlines the performance potential and racing origins of the 911 coupe and cabriolet. Includes an aerodynamic nose section with integrated front spoiler, side skirts, GT rear side trim panels and a discreet, fixed rear spoiler with an integrated third brake light. Prices do not include painting and installation.
$7,431.08
Make a selection AP958170 Agency power is proud to release its super sport exhaust system for the 958 Porsche Cayenne s v8 2011 and up. the super sport exhaust is a axle system that gives your 4.8l v8 engine a real aggressive tone. made here in the usa, the exhaust saves close to 30lbs off the rear end of the vehicle. using 304 stainless steel and detail oriented tig welding, the exhaust system uses two small high flow mufflers which give it the sports car rumble. its reduced back pressure design gives the engine improved horsepower and torque with most noticeable improvement in throttle response. because of the reduced restriction, this exhaust horsepower gains can definitely be noticed in the mid to top rpm range.
$1,495.95
Make a selection 91163193900EQ If you are restoring or replacing a rear taillight, you may want to consider this. It is a lightweight, high-quality OEM replacement, designed to perform like the original. Perfect for a race application, or for a lightweight street car. Quality replacement part manufactured by dansk. They offer a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. Driver's side fitment. 1 necessary per car.
$320.10
Make a selection BES99126010S Our exhaust products are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. Our entire "brombacher" line of exhausts is manufactured by m&m exhaust, gmbh in Germany who is no stranger to Porsche racing exhausts. Each is tested comprehensively for flow rate, thermal stress, resistance to cracking, and longevity. To further ensure quality, m&m use lightweight, motorsports grade, t 316 stainless steel material. Features: polished stainless steel double walled to dissipate heat so discoloration will take longer to appear / easier to polish out includes clamps for installation fits the factory cut outs in the bumper perfectly can be adjusted for...(choose a part on the right to read more)
$600.60
Make a selection 99763220100 Known as: luggage compartment lamp / light / light luggage compartment front and rear / light luggage compartment front / light engine compartment luggage compartment View/Change Diagram
From $8.60
Make a selection PLE54109900SEGR Trying to save weight at the track? These makrolon polycarbonate race windows are very lightweight, strong and durable. They are made in Germany. Includes right and left rear quarter windows and the rear windshield. Does not include the seals.
$2,087.80
Make a selection 100555111NB This is a rear carpet kit for a rs model or a rs tribute, without back seats. This set is a lightweight fine German velour that is trimmed in vinyl. Each is cut, sewn and trimmed to fit perfectly. We can also add special order script on the rear deck, just contact us and let us know what you have in mind. Made in Germany. Sold as a set. 1 necessary per car.
$716.10
Make a selection PNA504996 This new premium car cover features weathershield(tm), a specially formulated material that will provide maximum protection for your car. The material is weatherproof, breathable, uv resistant, dust-proof and has a superior drying time. The cover is very light and easy to handle, packs small and light while being easy to care for. Features include: elasticized bottom edges, reinforced tie-down grommets, non-flammable tailpipe protection, and a transparent rear license window. The color is a light medium gray with a contrasting black crest w/logotype on the front.(the crest shown is larger and colored for detail). Additionally, cover comes with a cable lock for theft prevention and a zippered storage duffel bag ...(choose a part on the right to read more)
$264.00
Make a selection WAP0407120A Fold-out stick in the same design as the Porsche sports car vehicle key. Porsche crest on the front. Led control light on the rear. The plug direction depends on the usb port being used. It can store up to 4 gb of data and is compatible with various operating systems including the Porsche communication management system with the individual universal audio interface option. In black with chrome. Dimensions: 53.5 x 38 x 19.5 mm General FitmentACCESSORY
$64.90
Make a selection 100555110NFB This is a rear lightweight carpet kit for a rs model or a rs tribute, without back seats. This set is made from German nadel filz. We go to extra lengths to ensure that our carpets are made as closely to the originals as possible. Each is cut, sewn and trimmed to fit perfectly. Details: German nadel filz (needle felt) trimmed in vinyl made in Germany custom made to order sold as a set. 1 necessary per car. Please note: when placing your order, we require the year, model and a list of any interior upgrades like roll bars, etc. This kit is custom made to order.
$1,096.70
Make a selection BES99716000S1 Our exhaust products are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. Our entire "brombacher" line of exhausts is manufactured by m&m exhaust, gmbh in Germany who is no stranger to Porsche racing exhausts. Each is tested comprehensively for flow rate, thermal stress, resistance to cracking, and longevity. To further ensure quality, m&m use lightweight, motorsports grade German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. Features: polished stainless steel double walled to dissipate heat so discoloration will take longer to appear / easier to polish out includes clamps for installation fits the factory cut outs i...(choose a part on the right to read more)
$851.40
Make a selection GT039T9 If you want the ultra wide-body looks and light weight, we offer these fiberglass flares for the front and rear, in different styles and widths. These fender flares are 9 inch turbo-style. The wheel arch has a more flat surface. General Fitment911 1974-77911 1987-89 911 1978-83 930 1975-77 911 1984-86
$374.30
Make a selection FVD33396400 A cost-effective combination of bilstein b6 shocks with a set of German h&r lowering springs. This kit is a perfect balance of performance and comfort for street use. Benefits: optimum adhesion and enhanced stability for daily driving and extreme driving situations. Slightly lower stance at 1.3 inches (35 mm) front / 1.18 inches (30 mm) rear. Marked improvement in safety and sportiness. Bilstein gas pressure technology. Bilstein mono-tube/upside-down technology. Made in Germany. Please note: if you would like to reduce the ride height, please order part # 115110016 which will lower the stance by another 1.5 inches (40mm).
$2,708.92
Make a selection FVD341999R Replace worn-out original soft rubber (65 shore hardness value) control arm bushings with our FVD clubsport series. They are made from rubber with a 85 shore hardness value which is the same as the rennsport models. 85 shore is more durable, provides more positive suspension location and is quiet and more forgiving than a monoball upgrade. This is the ideal upgrade for street and light track / clubsport use. This bushing set is made in Germany, weather sealed, crafted in high carbon steel and 7075 t6 aircraft aluminum and includes 85 shore hardness value cores. This is a front and rear bushing for the front lower control arm (wishbone). 2 sets are necessary per car.
$124.30
Make a selection GT030C If you wish to lighten up your 911, these fender fit the bill. Made of fiberglass, they replace the heavier factory steel fenders. Sold as a pair, these fenders weigh 6 pounds each (factory fenders weigh in at 28 pounds left, 25 pounds right respectively) with rear air exits, no gas bucket. General Fitment930 1975-77911 1978-83 911 1984-86 911 1987-89
$1,099.00
Make a selection GT036 If you want the ultra wide-body looks and light weight, we offer these fiberglass "rs" flares for the rear of your 911. These flares are 9" wide. General Fitment911 1974-77911 1987-89 911 1984-86 911 1978-83 930 1975-77
$374.30
Make a selection 91161510901 This 5-pin circular relay is used for multiple applications including, fog lamps, fuel pumps and the horn. If an electrical component is not functioning correctly be sure to check your relay first. Think of a relay as the on and off switch for most of your electronic components. If something is not working check the switch. Now that our classics are aging, we recommend keeping spares on hand. High-quality OEM replacement, designed to perform like the original. Sold individually. Please note: please check the model fitment tab to ensure accurate fitment. View/Change Diagram
From $20.49
Make a selection FVD51299124MM The moshammer stormforce evo rs rear spoiler for the 991.2 model blends a bit of Porsche ducktail heritage into its design to increase rear downforce and reduce front axle uplift. The contours of this spoiler have a step effect which seamlessly blends into both rear quarter panels. When viewed at a standstill it has a subtle factory like appeal that complements the cars lines. When deployed the rake angle takes on a more aggressive appearance evoking thoughts of the much beloved ducktails. Like a majority of the moshammer offerings, this spoiler is a direct replacement, so it secures seamlessly to the factory locations with the original hardware. This is an ideal addition for a leased vehicle or for those looki...(choose a part on the right to read more)
$1,455.30
Make a selection FVD51299122MM The moshammer vented rear diffuser with fins is an aggressive design that reduces aerodynamic drag. This vented diffuser allows air that is trapped by the rear bumper to exit, allowing for greater top end performance. The design also incorporates 5 fins that improve laminar airflow by reducing turbulence. Moshammer manufactured this as a direct replacement, so it secures seamlessly to the factory locations with the original hardware. This is an ideal addition for a leased vehicle or for those looking to return the car to its original appearance in the future. When added to other elements of the evo rs (991.2 turbo/s) package, the result is a confident, cohesive stance with balanced downforce. Features: vented f...(choose a part on the right to read more)
$1,844.70
Make a selection FVD512991TT01 The moshammer rear wing spoiler lip is a bold, aggressive design that maximizes downforce. The rear spoiler lip installs seamlessly without drilling and the Porsche active rear spoiler remains fully functional. This is the perfect addition for a leased vehicle or for those looking to return the car to its original appearance in the future. When added to other elements of either the evo rs (991.2 turbo/s) or downforce rs (991.1 turbo/s) packages, the result is a confident, cohesive stance with balanced downforce. Features: aggressive design increased rear downforce improved handling simple to install and remove lightweight composite material designed and manufactured in Germany FVD Brombacherhas a tradition of ...(choose a part on the right to read more)
$1,383.80
Make a selection 90154310230 Makrolon polycarbonate window that is very lightweight, strong and durable. This window fits the original frame and is kba approved and made in Germany. Sold individually. 1 necessary per car. Please note: 3 mm thick race windows are also available for more weight savings but require bonding as they will not fit in the original frame. Composite not glass View/Change Diagram
$267.30
Make a selection 24135291101YS High efficiency performance and race brakes for track and street use, fast to bed-in, great for street vehicle brake upgrade. Not only a high friction pad but very resistant to heat and loads of heavy braking means that yellowstuff has been used with great success in race cars and on street cars. Yellowstuff is an aramid fibre based brake compound with high brake effect form cold and is possibly one of the first ever compounds that can be used for street and tack driving. These pads do not require warm up but do get even stronger under the heat of hard driving. These are not a low dust pad and if your desire is for a low dust premium street use pad, you should consider ebc redstuff. Highlights: made for up to 9...(choose a part on the right to read more)
$204.60
Make a selection 24135291101BS If you simply need a quality OEM replacement pad, look no further than the blackstuff brake pad. It is a highly engineered brake compound that lasts longer, produces minimal dust and is the perfect choice for the urban or daily driver. Why spend more if all you need is a quality replacement pad? The blackstuff brake pad is a total non metallic pad containing zero steel fiber, making this a cleaner pad which is far less aggressive to cast iron brake rotors. Blackstuff has also been graded code "n" by the usa brake ratings system meaning this receives the top award for its environmentally friendly status and has also achieved the much coveted gg friction rating, almost unheard of in the automotive brake industr...(choose a part on the right to read more)
$97.90
Make a selection 90154310120 Makrolon polycarbonate window that is very lightweight, strong and durable. This window fits the original frame and is kba approved and made in Germany. Sold individually. 1 necessary per car. Please note: 3 mm thick race windows are also available for more weight savings but require bonding as they will not fit in the original frame. View/Change Diagram
$297.00
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |