Vehicles
Sections
414 not categorized PORSCHE 986 SPEC CHECKCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 968 1992-95 (includes uncategorized and accessory items) FVD641105F108RR01 Special order - nonrefundable.
$68.00
Make a selection FVD721T248 This special service tool was developed for the crucial task of securing the intake and exhaust camshafts in relation to each other during base timing, etc. Trying to do this task with any other method is risking a total engine failure. Applicable: Porsche model - 996 3.4 and 986
$223.30
Make a selection FVD721T251 This special service tool was developed for the proper installation of oil seal on pulley side of crank shaft. Trying to do this task with any other method is risking a total engine failure by way of a damaged oil seal. Applicable: Porsche model - 996 & Boxster.
$129.80
Make a selection FVD721T319 This adaptor ring is specifically designed to mate the engine case straight to any universal engine stand, using four 3/8 bolts, allowing for a full 360 degree motion of the motor. Bolts up to every Porsche engine ever produced. Machined with all the necessary reliefs and/or notches to allow for clearance of all engine parts including the flywheel and its respective lock tool.
$214.50
Make a selection FVD803993VR0222 High quality, German made three-point replacement safety belt, designed to perform like the original. Features / specs: belt length: 300 cm (118 inches) 3 point inertia reel belt angle adjustable reel (max. Of 8 *) includes 22 cm (8.5 inch) buckle, installation hardware and caps. Din-en-iso 9001: 2000 quality standard manufactured, e-mark approved. The matching rear belt is part # FVD803993hr sold individually. 2 necessary per car.
$187.00
Make a selection FVD85779570B High quality, German made replacement lap safety belt, designed to perform like the original. Features / specs: includes buckle, installation hardware and caps. Din-en-iso 9001: 2000 quality standard manufactured, e-mark approved. The matching front belt is part # 9288030330270b sold individually. 2 necessary per car.
$88.00
Make a selection FVD95761890MG Factory: engine - v8 twin-turbo capacity - 4806ccm compression ratio - 10,5:1 max. Power - 368kw (500hp) @ 6000rpm max. Torque - 700nm (516 lbf ft) @ 2250-4500rpm max. Speed - 275km/h max. Rpm - 6500rpm acceleration 0-100km/h - 5.1s tuning:* max. Power - 397kw (540hp) @ 6000rpm max. Torque - 780nm (575 lbf ft) @ 3500rpm max. Speed - 280km/h max. Rpm - 6700rpm acceleration 0-100km/h - 5.0s * only with sport exhaust system and sport air filter for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfected the art of software tuning, ...(choose a part on the right to read more)
$1,094.50
Make a selection FVD95861880MG Genuine: engine - v8 capacity - 4806 ccm compression ratio - 12,5:1 max. Power - 309kw (420hp) @ 6500rpm max. Torque - 500nm @ 3500rpm max. Speed - 256km/h max. Rpm - 7000rpm acceleration 0-100km/h - 6,0s tuning: max. Power - 325kw (442hp) @ 6000rpm max. Torque - 530nm @ 4500rpm max. Speed - 265km/h max. Rpm - 7200rpm acceleration 0-100km/h - 5,7s for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfected the art of software tuning, making substantial gains in horsepower and torque, while retaining drivability and most importan...(choose a part on the right to read more)
$1,484.16
Make a selection FVD98061891 Genuine: engine - v10 cylinder capacity - 5733ccm compression ratio - 12,0:1 max. Power - 450kw (612hp) @ 8000rpm max. Torque - 590nm @ 5750rpm max. Speed - 330km/h max. Rpm - 8400rpm acceleration 0-100km/h - 3.9s FVD software tuning: max. Power - 478kw (650hp) @ 8000rpm max. Torque - 640nm @ 6000rpm max. Speed - 340km/h max. Rpm - 8600rpm acceleration 0-100km/h - 3.8s for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfected the art of software tuning, making substantial gains in horsepower and torque, while retaining drivabi...(choose a part on the right to read more)
$5,494.50
Make a selection FVD99610061A Kit includes: software genius flash tool, sport air filter genuine: engine - 6 cylinder boxer twin-turbo capacity - 3600ccm compression ratio - 9,4:1 max. Power - 331kw (450hp) @ 5700rpm max. Torque - 620nm (457lbf ft) @ 3500-4500rpm max. Speed - 318km/h max. Rpm - 6750rpm acceleration 0-100km/h - 4.0s tuning: max. Power - 375kw (510hp) @ 5000rpm max. Torque - 745nm (550lbf ft) @ 4500rpm max. Speed - 328km/h max. Rpm - 7000rpm acceleration 0-100km/h - 3.8s for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfected the art of so...(choose a part on the right to read more)
$2,067.23
Make a selection FVDBRO1016003A Weight savings approximately 4kg (8.8 lbs) of rotating unsprung weight. Oem disk weight 10,8kg (23.8 lbs), brembo disk weight 8.9kg (19.69 lbs) rotors: (13") 330x34mm drilled discs bells / hats: precision milled billet aluminum hardware: brembo floating anti-rattle disc hardware by using an aluminum bell for the hub section of the disc, these rotor assemblies save a great deal of weight. Since this is both rotating and unsprung, it benefits the acceleration, braking, and handling of the vehicle. Secondly, it is better able to handle the large temperature changes that a brake disc experiences. The mounting system is designed to allow a specific amount of float in both radial and axial directions. Brembo has eng...(choose a part on the right to read more)
$1,815.00
Make a selection FVDCHR21052117B Long, filigrane spokes and a special small centerpiece give the design of the ch-r its at the same time timeless and dynamic look. The dual execution of the ch-r ii combines in an optimal way, its direct form, for the bestseller with the most modern technology in the motorsport industry. Two-part wheel. Laser marking motorsport in the center of the wheel. Exchengeable stainless steel-side guards. Weight optimization through the rear spokes.
$1,381.60
Make a selection FVDCHR21052147B Long, filigrane spokes and a special small centerpiece give the design of the ch-r its at the same time timeless and dynamic look. The dual execution of the ch-r ii combines in an optimal way, its direct form, for the bestseller with the most modern technology in the motorsport industry. Two-part wheel. Laser marking motorsport in the center of the wheel. Exchengeable stainless steel-side guards. Weight optimization through the rear spokes.
$1,381.60
Make a selection FVDCHR292124P Long, filigrane spokes and a special small centerpiece give the design of the ch-r its at the same time timeless and dynamic look. The dual execution of the ch-r ii combines in an optimal way, its direct form, for the bestseller with the most modern technology in the motorsport industry. Two-part wheel. Laser marking motorsport in the center of the wheel. Exchengeable stainless steel-side guards. Weight optimization through the rear spokes.
$1,309.00
Make a selection HEI600030S All optional equipment is ala carte with heigo. This is an x pattern diagonal like the rennsport and cup models. This part number is meant to be used use upon a new purchase of a heigo roll bar or roll cage. Please note: these bars are hand made to order. They typically take between 4-16 weeks. Every heigo cage is considered a special order item. Every heigo bar or cage is considered a motorsports part and is a special-order item. Motorsports parts may have some cosmetic inconsistency's (light scratches, etc.). For a perfect show car look, we suggest ordering the bar painted or powder coated. General FitmentALL
From $512.60
Make a selection HEI600062 With dmsb license for all 40 mm roll bars for installation in existing bars and cages from heigo (as well as all other manufacturers) 1. To be used with all active rollover protection with a dmsb- or ons certificate from heigo 2. To be used with all active rollover protection with a dmsb- or ons certificate from matter gmbh (graben-neudorf) 3. To be used in so called self constructed devices as decribed in chapter 2 53-8.1.a in the current attachement j or chapter 2 53-8.4 in the old attachment j under the isg. 4 . This harness bar is only allowed to be used at dmsb-events and only at non fia events. Every heigo bar or cage is considered a motorsports part and is a special-order item. Motorsports parts may have...(choose a part on the right to read more) General FitmentALL
From $389.06
Make a selection HEI911001003S Heigo motorsports has been building extremely safe roll cages and roll bars for the Porsche vehicles for 30+ years. They have also produced countless factory and motorsports bars and cages for the marque over the years. We purchase their bars because they have a long-standing history with the fia and dmsb in Germany. They have hundreds of approval certificates to their name and maintain a meticulous safety record. Facts: bolt-in bar chromoly steel 1.5-inch diameter tubing, .098 wall thickness tubing. Bars which connect to the main hoop, use a connecting joint system. Tig welded. Retains full seat adjustability. Semi-gloss black finish. Cost effective for club sport use. We recommend adding the harness bar, part...(choose a part on the right to read more)
$1,284.80
Make a selection HEI911002001S1 We deliver with dmsb-ons certificat ,incl. Tunneling supporting and diagonal bars for the work location motorsport you need this options: 600001 side rotection 600035 dash board panel faces optional : 600036 harness mounting tube only in steel 600006 upholstery 600014 diagonals bars with connecting joint every heigo bar or cage is considered a motorsports part and is a special-order item. Motorsports parts may have some cosmetic inconsistency's (light scratches, etc.). For a perfect show car look, we suggest ordering the bar painted or powder coated.
$2,406.80
Make a selection HEI914002001S We deliver with dmsb-ons certificate. For competition motorsports you will need these options: 600044 every heigo bar or cage is considered a motorsports part and is a special-order item. Motorsports parts may have some cosmetic inconsistency's (light scratches, etc.). For a perfect show car look, we suggest ordering the bar painted or powder coated.
$2,625.70
Make a selection HEI944001001S Heigo motorsports has been building extremely safe roll cages and roll bars for the Porsche vehicles for 30+ years. They have also produced countless factory and motorsports bars and cages for the marque over the years. We purchase their bars because they have a long-standing history with the fia and dmsb in Germany. They have hundreds of approval certificates to their name and maintain a meticulous safety record. Facts: bolt-in bar chromoly steel 1.5-inch diameter tubing, .098 wall thickness tubing. Includes a single diagonal bar that is welded in (fixed). Includes a removable harness bar. Tig welded. Semi-gloss black finish. Please note: this is for cars that do not have a sunroof. These bars are hand made to...(choose a part on the right to read more) General Fitment968 1992-95944 1982-85 944 1985-88 924 1980-85
From $1,350.00
Make a selection HEI944002001S Steel roll cage weight: 39 kg tubing diameter: 38mm wall thickness: 2.5mm we deliver with fia-cert. Every heigo bar or cage is considered a motorsports part and is a special-order item. Motorsports parts may have some cosmetic inconsistency's (light scratches, etc.). For a perfect show car look, we suggest ordering the bar painted or powder coated. General Fitment968 1992-95944 1982-85 944 1985-88
From $2,625.70
Make a selection HEI944002004S1 Every heigo bar or cage is considered a motorsports part and is a special-order item. Motorsports parts may have some cosmetic inconsistency's (light scratches, etc.). For a perfect show car look, we suggest ordering the bar painted or powder coated.
$1,838.10
Make a selection HEI964001005S Heigo motorsports has been building extremely safe roll cages and roll bars for the Porsche vehicles for 30+ years. They have also produced countless factory and motorsports bars and cages for the marque over the years. We purchase their bars because they have a long-standing history with the fia and dmsb in Germany. They have hundreds of approval certificates to their name and maintain a meticulous safety record. Facts: bolt-in bar - screwed in to the original seat belt points chromoly steel 1.5-inch diameter tubing, .098 wall thickness tubing. Bars which connect to the main hoop, use a connecting joint system. Tig welded. Retains full seat adjustability. Semi-gloss black finish. Cost effective for club sport ...(choose a part on the right to read more)
$1,284.80
Make a selection HEI981001001S Heigo motorsports has been building extremely safe roll cages and roll bars for Porsche vehicles for 30+ years. They have also produced countless factory and motorsports bars and cages for the marque over the years. Chromoly steel 1.5 inch diameter tubing, .098 wall thickness tubing. A true bolt in bar that does not require drilling or welding. Includes a harness bar which is located on the b-pillar hoop. Bars which connect to the main hoop, use a connecting joint system so that you can easily access the motor without the use of tools. Tig welded. Retains full seat adjustability. Factory seat belts or 5-6 point belts can be used. Semi-gloss black finish. The front hoop mounts to the upper bulkhead, in the OEM m...(choose a part on the right to read more)
$1,428.90
Make a selection HEI993001005A Heigo motorsports has been building extremely safe roll cages and roll bars for the Porsche vehicles for 30+ years. They have also produced countless factory and motorsports bars and cages for the marque over the years. We purchase their bars because they have a long standing history with the fia and dmsb in Germany. They have hundreds of approval certificates to their name and maintain a meticulous safety record. Facts: bolt-in bar aluminum 1.5-inch diameter tubing, .098 wall thickness tubing. Bars which connect to the main hoop, use a connecting joint system. Aluminum finish. Primarily for street use as a harness bar is not an option. Please note: these bars are hand made to order. They typically take between...(choose a part on the right to read more)
$1,401.40
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |