PORSCHE BOXSTER KIT TOOLS
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: BOXSTER 1997-04 (includes uncategorized and accessory items)
The new revised ims retrofit tool kit is required for performing an ims retrofit. ims basic tool set.
Contains: puller, driver, cam locks, tdc lock, and broken stud extractor.
Designed for use with ims bearing update kits #10 0124 100, 10 0124 125, 10 0124 225, 10 0124 275, 10 0124 300, and ims solution #10 0124 150, 10 0124 250.
General Fitment BOXSTER 2005-08 BOXSTER 1997-04 911 1998-05
Ims supplemental set.
Contains: puller, hex adapter, driver, spanner, oil plug installer, narrow 12 point socket.
Designed for use with ims bearing update kit #10 0124 300 & ims solution # 10 0124 150, 10 0124 250.
General Fitment BOXSTER 2005-08 BOXSTER 1997-04 911 1998-05
This special 5 pc. Double ended tool kit (excluding one) was designed to aid the technician in disassembly of door panels, fascia / trim strips of dashboards, window installation, etc. Made from impact resistant nylon plastic, it won't scratch or mark parts like similar metal versions.
Fits: GT3 cup 3.6l (05-07), Carrera s, 3.8l, 261kw (05-08), Carrera, 3.6l, 239kw (05-08), GT3 r/rs (99-03), GT3-cup (98-04), GT3 04-05 (04-05), GT3 99-01 (99-01), GT2 (01-05), turbo (01-05), c4s 3.6 (02-05), c4 3.6 (02-05), c2 3.6 (02-05), c4 3.4 (99-01), c2 3.4 (98-01), GT2 (96-98), turbo (95-98), cup-race (94-98), rsr (96-97), rs (95-96), c4s (96-98), c4 (95-98), c2s (96-98), c2 (94-98), 3.2, 206 kw (05-06), 2.7, 176 kw (05...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05 911 1994-98 BOXSTER 2005-08 BOXSTER 1997-04 911 1989-94 CAYENNE 2003-06
Inhalt : - 10 lange steckschlussel (14,15,16,17,18,19,21,22,24 mm). - 3 verbindungsstucke m. Schraubeinsatz f. Schlitzschrauben 5,6 u. 8 mm. - 3 verbindungsstucke mit 6-kant-schraubeinsatz, 8, 9 u. 11 mm. - 1 verlangerung mit magnetischem schraubeinsatzhalter, 7,94 mm. - 1 verlangerung mit schraubeinsatzhalter, 6,35 mm. - 1 verlangerung mit 8 mm vierkant. - 5 schraubeinsatze : eh, 6,7,8 mm - exr.140 und ex.245 - xzn ev.212. - 1 gleitgriff j.120. - 1 ringschlussel 68.17x19. - 1 adapter fur drehmomentschlussel. Zum festhalten des stossdampferschafts beim losen bzw. Anziehen der mutter. Drehmomentanziehen mit hilfe eines drehmomentschlussels. Kann mit weiteren schraubeinsatzen (torx, xzn, 6-kant) erweitert werden....(choose a part on the right to read more)
High quality, German made brake bleeder and vacuum pump kit. Ideal for use on brakes, clutches, hvac, bleeding the fuel system or testing vacuum on a turbocharged system. Vacuum can be tested up to 0.9 bar and pressure up to 4 bar. The kit is complete with a variety of hose ends for various connections. Sold individually.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment ACCESSORY
From $246.40
Make a selection
Short blade stubby flat head
Vacuum testing is gaining more importance every day as cars have more sophisticated servo-feedback devices fuel injection, egr, emission controls, air conditioning, door locks, etc. You can waste hours of your time guessing at the source of problems, or you can accurately test and reach definitive conclusions with this sophisticated device. Illustrated booklet makes your troubleshooting easy.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
Content: 5x double open-ended wrench (one each: 8x9, 10x11, 12x13, 14x15 and 17x19), 1x wheel nut wrench, 2x holding tools for v-belt, 1x combination pliers, 1x screwdriver, 1x phillips screwdriver, 1x pull-off lever for hub cap, 1x flexible head socket wrench, 1x spark plug socket wrench, 1x hexagon socket wrench, 1x spark plug ratchet wrench, 1x stubby screwdriver, 1x brush, 1x feeler gauge, 1x wheel nut, 1x narrow v-belt, 2x spark plug holder, 1x cleaning cloth  while the original was made of synthetic leather, the impressive new edition of the tool bag for the 356 Carrera is finished in extremely high-quality leather just like the design for the remaining 356 models, this version also features brown leat...(choose a part on the right to read more)
From $729.96
Make a selection
Kit includes:
Software ecu software (flashclient cable), power-flow kit, sport header system, sportmuffler (2x90mm tips).
Some models require oxygen sensor relocation.
Genuine:
Engine - 6 cylinder boxer
Capacity - 2687ccm
Compression ratio - 11,0:1
Max. Power - 162kw (220hp) @ 6400rpm
Max. Torque - 260nm (192lbf ft) @ 4750rpm
Max. Speed - 250km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 6.6s
Tuning:
Max. Power - 184kw (250hp) @ 6500rpm
Max. Torque - 300nm (221lbf ft) @ 5000rpm
Max. Speed - 265km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 6.1s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$3,861.00
Make a selection
Kit includes:
Software ecu software (flashclient cable) and sport air filter
Genuine:
Engine - 6 cylinder boxer
Capacity - 3179ccm
Compression ratio - 11,0:1
Max. Power - 185kw (252hp) @ 6250rpm
Max. Torque - 305nm (225lbf ft) @ 4500rpm
Max. Speed - 260km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 5.6s
Tuning:
Max. Power - 195kw (265hp) @ 6400rpm
Max. Torque - 325nm (240lbf ft) @ 4900rpm
Max. Speed - 267km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 5.4s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we ...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,053.80
Make a selection
Kit includes:
Software ecu software (flashclient cable), sport air filter, sport header system.
Some models require oxygen sensor relocation.
Genuine:
Engine - 6 cylinder boxer
Capacity - 2687ccm
Compression ratio - 11,0:1
Max. Power - 162kw (220hp) @ 6400rpm
Max. Torque - 260nm (192lbf ft) @ 4750rpm
Max. Speed - 250km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 6.6s
Tuning:
Max. Power - 178kw (242hp) @ 6500rpm
Max. Torque - 290nm (214lbf ft) @ 5000rpm
Max. Speed - 261km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 6.3s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,901.90
Make a selection
Kit includes:
Software ecu software (flashclient cable) and sport air filter
Genuine:
Engine - 6 cylinder boxer
Capacity - 2687ccm
Compression ratio - 11,0:1
Max. Power - 162kw (220hp) @ 6400rpm
Max. Torque - 260nm (192lbf ft) @ 4750rpm
Max. Speed - 250km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 6.6s
Tuning:
Max. Power - 173kw (235hp) @ 6500rpm
Max. Torque - 280nm (207lbf ft) @ 4750rpm
Max. Speed - 257km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 6.4s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we ...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,053.80
Make a selection
Kit includes:
Software ecu software (flashclient cable), power-flow kit, sport header system and sportmuffler (2x90mm tips).
Some models require oxygen sensor relocation.
Genuine:
Engine - 6 cylinder boxer
Capacity - 3179ccm
Compression ratio - 11,0:1
Max. Power - 185kw (252hp) @ 6250rpm
Max. Torque - 305nm (225lbf ft) @ 4500rpm
Max. Speed - 260km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 5.6s
Tuning:
Max. Power - 206kw (280hp) @ 6400rpm
Max. Torque - 345nm (254lbf ft) @ 4900rpm
Max. Speed - 275km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 5.1s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$4,205.30
Make a selection
Our tool is designed to replace the intermediate shaft bearing without engine disassembly.
This process can be completed with our tool without any damage to the crankcase or intermediate shaft. It is also possible with our tool to extract the bearing if the center stud or bearing is broken.
Kit includes:
- bearing puller/adapter to extract the existing bearing
- bearing driver tool to install the new bearing
- crankshaft lock pin (pulley tdc) to secure the engine at the correct position
- made in Germany
Fits: Carrera 4s, 3.8l, 261kw (05-08), Carrera 4, 3.6l, 239kw (05-08), Carrera s, Carrera, c4s 3.6 (02-05), c4 3.6 (02-05), c2 3.6 (02-05), c4 3.4 (99-01), c2 3.4 (98-01), s sport 3.4, 223 kw (0...(choose a part on the right to read more)
General Fitment 911 2005-08 911 1998-05 CAYMAN 2006-08 BOXSTER 2005-08 BOXSTER 1997-04
Kit includes:
Software ecu software (flashclient cable), sport air filter and sport header system.
Some models require oxygen sensor relocation.
Genuine:
Engine - 6 cylinder boxer
Capacity - 3179ccm
Compression ratio - 11,0:1
Max. Power - 185kw (252hp) @ 6250rpm
Max. Torque - 305nm (225lbf ft) @ 4500rpm
Max. Speed - 260km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 5.6s
Tuning:
Max. Power - 200kw (272hp) @ 6400rpm
Max. Torque - 335nm (247lbf ft) @ 4900rpm
Max. Speed - 270km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 5.3s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche eng...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,747.90
Make a selection
Ims solution. Solid bearing replacement with oiling system.
Only for cars originally equipped with a single row ims bearing (original cover dish depth = 19.27 mm).
Kit contains: ims solution plain bearing, ims solution flange, press-in ims tube plug, bearing support bolt, shim, circlip, bolts, spin-on oil filter adapter with oiling port, oil line & fittings, oil filter.
Requires ims tool set #10 0125 001, and ims supplemental tool set #10 0125 003. Enables bearing update without engine removal.
Replacement oil filter for this update, use # 10 0270 006.
The ims solution is designed to last the lifetime of the engine and does not have a service interval.
Installation by an automotive professional is require...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08 BOXSTER 1997-04 911 1998-05
$1,756.89
Make a selection
Power slot front right cryogenic slotted rotors Porsche Boxster 97-04
Porsche is known for their racing heritage and dedication to maximum performance, making them one of the most respected marquees in the automotive industry. Classic looks, modern performance, and German engineering set it apart from mass produced cars. Unfortunately many vehicles braking systems are compromised in regards to performance to reduce costs. A factory brake system is designed to handle normal stop and go traffic, not continuous aggressive braking in high temperature situations.
What good is power without control? The ability to stop quickly is just as important as accelerating quickly, especially on a race track. As a...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|