Vehicles
Sections
121 not categorized PORSCHE 911 ENGINE SPECSCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: BOXSTER 2005-08 (includes uncategorized and accessory items) FVD721T319 This adaptor ring is specifically designed to mate the engine case straight to any universal engine stand, using four 3/8 bolts, allowing for a full 360 degree motion of the motor. Bolts up to every Porsche engine ever produced. Machined with all the necessary reliefs and/or notches to allow for clearance of all engine parts including the flywheel and its respective lock tool.
$214.50
Make a selection FVD95761891MG Genuine: engine - v8 capacity - 4806 ccm compression ratio - 12,5:1 max. Power - 298kw (405hp) @ 6500rpm max. Torque - 500nm @ 3500rpm max. Speed - 253km/h max. Rpm - 7000rpm acceleration 0-100km/h - 6,1s tuning: max. Power - 312kw (425hp) @ 6000rpm max. Torque - 520nm @ 4500rpm max. Speed - 265km/h max. Rpm - 7200rpm acceleration 0-100km/h - 5,7s for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfected the art of software tuning, making substantial gains in horsepower and torque, while retaining drivability and most importan...(choose a part on the right to read more)
$1,094.50
Make a selection FVD98010002 Kit includes: 2 x sport motronic dme (ecu) exchange 2 x sport airfilter 1 x sport exhaust system genuine: engine - v10 cylinder capacity - 5733ccm compression ratio - 12,0:1 max. Power - 450kw (612hp) @ 8000rpm max. Torque - 590nm @ 5750rpm max. Speed - 330km/h max. Rpm - 8400rpm acceleration 0-100km/h - 3.9s tuning: max. Power - 496kw (675hp) @ 8000rpm max. Torque - 670nm (495 lbf ft) @ 6000rpm max. Speed - 345km/h max. Rpm - 8600rpm acceleration 0-100km/h - 3.7s FVD dme / ecu programming philosophy: for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. ...(choose a part on the right to read more)
$17,032.10
Make a selection FVD521911003 Since 1984, we have established an extensive network of interior specialty vendors that have the skills necessary to reproduce to o.e. Specifications. This classic rs sport seat is a perfect example of that. It was recreated to look like the rs seats from the 1970's but with more generous proportions and modern construction. Note the exacting precision of the bolsters, inserts, materials and seating position which are just like the original. This seat offers aggressive bolstering and support in the shoulder, back and thigh areas to enhance high-performance driving. But perhaps its best feature is a design that narrows at the base of the backrest allowing this seat to fit in to the narrowest of cockpits. Featur...(choose a part on the right to read more)
$1,624.70
Make a selection FVD98710031 Kit includes: General FitmentBOXSTER 2005-08
$1,153.90
Make a selection FVD98710012 Kit includes: General FitmentBOXSTER 2005-08
$8,358.90
Make a selection FVD116987 Hailing from the baden wurttemberg region in Germany, speaking the language and dealing with lead engineers from the OEM and motor sport manufacturers since 1984 has many advantages. This FVD exclusive clutch kit is culmination of zf sachs race engineering gmbh parts and an aasco motorsports lightweight flywheel that have been developed to work together without compromise. This kit offers a silky-smooth release, superb drivability, can handle more torque than comparable clutch kits. We specifically chose a clutch disc with torsion springs that function as a vibration damper between engine and gearbox that is necessary when removing the factory dual mass flyweel (dmfw). It also means that you will experience an ...(choose a part on the right to read more)
$2,638.90
Make a selection FVD10699710 This radiator is produced by the racing & high-performance division of csf who design, engineer and manufacture the most advanced, efficient, and reliable cooling systems in the world. Csf manufacturers all aluminum high performance radiators that are a direct-fit replacement for Porsche racecars and streetcars. Csf radiators improve cooling efficiency by 10-20 % over the factory radiators. Each radiator is stamped to the same geometry and includes aluminum end tanks that offer more reliability than the factory plastic end tanks. Each csf end tank features quality welding and is generally considered the strongest tank design in the industry. If you are planning to upgrade or replace your radiators, we highly re...(choose a part on the right to read more)
$526.90
Make a selection RES99600060SC Race exhaust system 996 GT3 cup, stainless steel, cat bypass with tips facts: - + 25 crank hp & + 19 crank torque - catalytic bypass - long tube headers 3 x 50mm (1.97") tubes into a 70mm (2.75") collector for max. Torque - does not exceed 106db - weighs 51 lbs. (24 kg) - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability - cone style connection design to prevent exhaust leaks - includes aeroquip quick release clamps - made in Germany - can be ordered with race cats. Please ask your FVD sales representative for details. FVD is proud to introduce our newest line of Brombacherrace exhaust systems. Brombacher race exhausts are engineered for the discerning Porsche owner and offer unmatche...(choose a part on the right to read more)
$6,350.30
Make a selection RES99700060S Race exhaust system 997 GT3 cup (2010+ 3.8 l), stainless steel. - header diameter 50mm - tube diameter 70mm after the headers - recommended for engines 450hp+ all motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
From $5,482.40
Make a selection FVDBRO1016003A Weight savings approximately 4kg (8.8 lbs) of rotating unsprung weight. Oem disk weight 10,8kg (23.8 lbs), brembo disk weight 8.9kg (19.69 lbs) rotors: (13") 330x34mm drilled discs bells / hats: precision milled billet aluminum hardware: brembo floating anti-rattle disc hardware by using an aluminum bell for the hub section of the disc, these rotor assemblies save a great deal of weight. Since this is both rotating and unsprung, it benefits the acceleration, braking, and handling of the vehicle. Secondly, it is better able to handle the large temperature changes that a brake disc experiences. The mounting system is designed to allow a specific amount of float in both radial and axial directions. Brembo has eng...(choose a part on the right to read more)
$1,815.00
Make a selection RES987202TH1OK The heat reduction for exhaust systems with thermal insulation come first in motor sport. By reducing the heat buildup under the vehicle and in the engine compartment cooler air intake temperatures are reached which leads to a noticeable performance increase. Vehicles with increased power produce also higher exhaust temperatures. Exhaust systems with thermal insulation also protected adjacent components from these temperatures. Benefits for thermal insulation: - performance improvement - increasing the efficiency of the engine - cooler air intake - reduce the heat buildup under the vehicle - reduction of fuel consumption - faster response for catalysts (shorter heat cycle) - temperature resistance more than 110...(choose a part on the right to read more)
$1,183.60
Make a selection NLA10510500 Good for engines with big-bore kits and dual weber or solex carburetors click for full specs replaces 61610510500
$577.50
Make a selection FVD99661831MG Genuine: engine - 6 cylinder boxer capacity - 3600ccm compression ratio - 11,7:1 max. Power - 265kw (360hp) @ 7200rpm max. Torque - 370nm (273lbf ft) @ 5000rpm max. Speed - 302km/h max. Rpm - 7600rpm acceleration 0-100km/h - 4.8s tuning: max. Power - 276kw (375hp) @ 7000rpm max. Torque - 390nm (288lbf ft) @ 5000rpm max. Speed - 310km/h max. Rpm - 7900rpm acceleration 0-100km/h - 4.6s for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfected the art of software tuning, making substantial gains in horsepower and torque, while re...(choose a part on the right to read more)
$1,204.50
Make a selection RES987202TH1 The heat reduction for exhaust systems with thermal insulation come first in motor sport. By reducing the heat buildup under the vehicle and in the engine compartment cooler air intake temperatures are reached which leads to a noticeable performance increase. Vehicles with increased power produce also higher exhaust temperatures. Exhaust systems with thermal insulation also protected adjacent components from these temperatures. Benefits for thermal insulation: - performance improvement - increasing the efficiency of the engine - cooler air intake - reduce the heat buildup under the vehicle - reduction of fuel consumption - faster response for catalysts (shorter heat cycle) - temperature resistance more than 110...(choose a part on the right to read more) General FitmentCAYMAN 2009-12CAYMAN 2006-08 BOXSTER 2009-11 BOXSTER 2005-08 BOXSTER 1997-04
From $2,171.70
Make a selection RES99701061S Race headers 997 GT3 cup, stainless steel - + 10 crank hp & + 8 crank torque - total weight is 14.1 lbs. (6,4 kg) FVD is proud to introduce our newest line of Brombacherrace exhaust systems. Brombacher race exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. All of our exhausts are manufactured in Germany and are tested comprehensively for flow rate characteristics, thermal stress, resistance to cracking, and longevity. To further ensure quality, this race system meet's the standards of the fia and is registered with them directly. In addition, Brombacherrace exhausts systems are available for ultimate performance full titanium...(choose a part on the right to read more)
From $2,985.40
Make a selection RES99701062S Race headers 997 GT3 cups, stainless steel - + 10 crank hp & + 8 crank torque - total weight is 14.1 lbs. (6,4 kg) FVD is proud to introduce our newest line of Brombacherrace exhaust systems. Brombacher race exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. All of our exhausts are manufactured in Germany and are tested comprehensively for flow rate characteristics, thermal stress, resistance to cracking, and longevity. To further ensure quality, this race system meet's the standards of the fia and is registered with them directly. In addition, Brombacherrace exhausts systems are available for ultimate performance full titaniu...(choose a part on the right to read more)
From $3,777.40
Make a selection IPD8717434 The 74mm Boxster s/Cayman s plenum utilizes the factory 74mm throttle body. This version provides impressive power gains throughout the entire power band, especially in the midrange where it's most critical and most enjoyed. General FitmentCAYMAN 2006-08BOXSTER 2005-08
$795.00
Make a selection RES99700160S Please note: system is shown with thermo-isolation which is sold separately! - header diameter 55mm - tube diameter 76mm after the headers - recommended for engines 450hp+ all motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$8,336.90
Make a selection SP895 Spec stage 5 clutch Porsche Boxster 2.7l 5 speed 00-08 General FitmentBOXSTER 1997-04BOXSTER 2005-08 CAYMAN 2006-08
From $899.95
Make a selection SP893H Spec stage 2+ clutch Porsche Boxster 2.7l 5 speed 97-08 General FitmentBOXSTER 1997-04BOXSTER 2005-08 CAYMAN 2006-08
From $799.95
Make a selection SNX009 Sonax tire gloss gel is an all-new tire restoration and conditioning formula from the chemists at sonax. The innovative gel formula penetrates the tire surface hydrating and revitalizing the rubber. Sonax tire gloss gel is rich in specially engineered silicon, achieving an intense, semi-gloss with a fresh, clean showroom shine. Each application lasts for several weeks. One bottle of sonax tire gloss gel is sufficient for up to fifty (50) tire applications. General FitmentACCESSORY
$15.95
Make a selection 15E24D
General FitmentALL
$8.57
Make a selection 99710090391 All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$861.30
Make a selection BKBOSCH Finally! The authoritative manual on Bosch fuel injection. This is the only book that fully explains all aspects of these Bosch systems: motronic, l-jetronic, lh-jetronic, lh-motronic, d-jetronic, k-jetronic, ke-jetronic, and ke-motronic. You will find specific information on the newest ke-motronic and lh-motronic systems that is not available from any other source. General FitmentACCESSORY
$35.00
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |