PORSCHE 911 CYLINDER KITS
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
The hls provides additional road clearance for lowered vehicles. When expanded, a range of up to 45 mm of lift is produced, thereby helping sport cars avoid road clearance difficulties such as speed bumps, road construction, etc. Kw hls is available as vehicle specific solution or individual conversion kit depending on the car model.
hls is available in two different versions: hls 2 which is fitted to the front axle and hls 4 which can be attached to the front and rear axle and allows lifting the entire vehicle. The hydraulic cylinder unit is located on the coilover body between spring perch and spring. The advantage of a hydraulic system is that there is no compression (motion) of the extended cylinder ...(choose a part on the right to read more)
General Fitment 911 2005-08
$8,571.14
Make a selection
The kw hls (hydraulic lift system) provides additional road clearance for lowered vehicles. When expanded, a range of 30mm to 45mm of lift is produced, thereby helping sport cars avoid road clearance difficulties like speed bumps, road constructions etc. The hydraulic cylinder unit is installed between the spring perch and spring. The pump unit is installed inside or near the spare wheel well. A programmable control unit processing the can bus signal for speed control is also included in the kit.
Version hls 2: enables only the front axles to be lifted and lowered.
Features:
For vehicles with with little road clearance
General Fitment 911 2005-08
$6,492.14
Make a selection
Brombacher 997 tt stainless steel race pipes
Facts:
- + 35 crank hp & + 25 crank torque
- 3" tubing (75mm) that tapers down to 2.25" (57mm) to prevent turbo damage.
- weighs 7 lbs. (3,1 kg)
- t 316 stainless steel for improved durability over t 304.
- bolts up to the turbochargers, replacing both the cats and the muffler.
- reduces turbo lag and backpressure.
- exhaust tips are not included! Stock tips will fit.
- intoxicating growl at idle, partial throttle and wide open throttle.
- made in Germany
- programming or o2 sensor simulators are necessary, as the lack of catalytic converters will throw the check engine light. (see part numbers below)
Figures:
Genuine:
Engine - 6 cylinder...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $525.80
Make a selection
The hls provides additional road clearance for lowered vehicles. When expanded, a range of up to 45 mm of lift is produced, thereby helping sport cars avoid road clearance difficulties such as speed bumps, road construction, etc. Kw hls is available as vehicle specific solution or individual conversion kit depending on the car model.
hls is available in two different versions: hls 2 which is fitted to the front axle and hls 4 which can be attached to the front and rear axle and allows lifting the entire vehicle. The hydraulic cylinder unit is located on the coilover body between spring perch and spring. The advantage of a hydraulic system is that there is no compression (motion) of the extended cylinder ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$9,516.14
Make a selection
Kw variant 3 coilover kit with front hls 2 lift system Porsche 997 c2 05+
The new variant 3 is state-of-the-art technology for the skilled and experienced driver. The separate and independent compression and rebound dampening options allow a truly individual driving set-up. These unique systems with the 3 individually adjustable components, allows for adjustment of the compression of the damper in the low-speed range, while the highspeed set-up, so decisive for driving comfort, has been preset by our engineers.
features:
- independently adjustable dampening technology -rebound and compression dampening
- inox-line stainless steel technology at no extra charge
- individual height adjustmen...(choose a part on the right to read more)
General Fitment 911 2005-08
$10,253.24
Make a selection
T-316 stainless steel headers from FVD produce dyno proven horsepower and torque as well as a phenomonal sound! FVD headers feature equal length, mandrel bent tubing and a merge collector to further improve exhaust gas flow, reduce system back pressure and optimize exhaust gas scavaging and cylinder filling.
FVD headers are dyno tested and produce up to 15hp
Tech tip: for older cars repair-kit
FVD mk 996201
Fits: c4s 3.6 (02-05), c4 3.6 (02-05), c2 3.6 (02-05), c4 3.4 (99-01), c2 3.4 (98-01)
General Fitment 911 1998-05
$1,081.20
Make a selection
FVD Brombacherhas a long tradition of offering high quality, extensively tested, easily installed tuning products that offer proven performance. Those high standards naturally led us to the innovative pro design (ipd) plenum product.
The ipd patented cast aluminum intake plenum with the larger 82 mm (gt3) throttle body (competition plenum) increases horsepower and torque by optimizing and increasing airflow into the intake manifold.
The factory plastic "t" style intake creates airflow turbulence, which deprives the motor of air, robbing hp and torque. Ipds "y" style plenum smoothly channels the airflow towards the left and right cylinder banks. The engine receives a larger mass of air at a higher vel...(choose a part on the right to read more)
General Fitment 911 2005-08 911 1998-05
From $1,307.90
Make a selection
The kw hls (hydraulic lift system) provides additional road clearance for lowered vehicles. When expanded, a range of 30mm to 45mm of lift is produced, thereby helping sport cars avoid road clearance difficulties like speed bumps, road constructions etc.
version hls 4: covers both the front and rear axles of the vehicle.
Features:
- for vehicles with with little road clearance
- vehicle specific applications
- activation of change in height by a small keychain transmitter avoiding the need to run additional wires through the vehicle
- height changes can be done while the vehicle is moving, up to speeds of 50 mph
- automatically lowering of the vehicle
- with tv certificate
- rub...(choose a part on the right to read more)
General Fitment 911 2005-08
$9,516.14
Make a selection
Kw variant 3 coilover kit with front hls 2 lift system Porsche 997 turbo 07+
The new variant 3 is state-of-the-art technology for the skilled and experienced driver. The separate and independent compression and rebound dampening options allow a truly individual driving set-up. These unique systems with the 3 individually adjustable components, allows for adjustment of the compression of the damper in the low-speed range, while the highspeed set-up, so decisive for driving comfort, has been preset by our engineers.
features:
- independently adjustable dampening technology -rebound and compression dampening
- inox-line stainless steel technology at no extra charge
- individual height adjustm...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$11,765.24
Make a selection
Kw variant 3 coilover kit with front hls 2 lift system Porsche 997 GT3 & rs 07+
The new variant 3 is state-of-the-art technology for the skilled and experienced driver. The separate and independent compression and rebound dampening options allow a truly individual driving set-up. These unique systems with the 3 individually adjustable components, allows for adjustment of the compression of the damper in the low-speed range, while the highspeed set-up, so decisive for driving comfort, has been preset by our engineers.
features:
- independently adjustable dampening technology -rebound and compression dampening
- inox-line stainless steel technology at no extra charge
- individual height adj...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$11,481.74
Make a selection
Kw variant 3 coilover kit with front & rear hls 4 lift system Porsche 997 c2 05+
The new variant 3 is state-of-the-art technology for the skilled and experienced driver. The separate and independent compression and rebound dampening options allow a truly individual driving set-up. These unique systems with the 3 individually adjustable components, allows for adjustment of the compression of the damper in the low-speed range, while the highspeed set-up, so decisive for driving comfort, has been preset by our engineers.
features:
- independently adjustable dampening technology -rebound and compression dampening
- inox-line stainless steel technology at no extra charge
- individual height ad...(choose a part on the right to read more)
General Fitment 911 2005-08
$12,143.24
Make a selection
The hls provides additional road clearance for lowered vehicles. When expanded, a range of up to 45 mm of lift is produced, thereby helping sport cars avoid road clearance difficulties such as speed bumps, road construction, etc. Kw hls is available as vehicle specific solution or individual conversion kit depending on the car model. Hls is available in two different versions: hls 2 which is fitted to the front axle and hls 4 which can be attached to the front and rear axle and allows lifting the entire vehicle. The hydraulic cylinder unit is located on the coilover body between spring perch and spring. The advantage of a hydraulic system is that there is no compression (motion) of the extended cylinder unit (r...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$7,060.49
Make a selection
Kw variant 3 coilover kit with front & rear hls 4 lift system Porsche 997 GT3 & rs 07+
The new variant 3 is state-of-the-art technology for the skilled and experienced driver. The separate and independent compression and rebound dampening options allow a truly individual driving set-up. These unique systems with the 3 individually adjustable components, allows for adjustment of the compression of the damper in the low-speed range, while the highspeed set-up, so decisive for driving comfort, has been preset by our engineers.
features:
- independently adjustable dampening technology -rebound and compression dampening
- inox-line stainless steel technology at no extra charge
- individual hei...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$13,371.74
Make a selection
Move beyond the old-style distributor-fire ignition system and add some real spark to yout Porsche! The clewett crank fire ignition is an advanced, state of the art design that combines the functions of distributor, cd and coil into a complete, integrated system. At the heart of dfi is the xdi electronic module that fires the plugs directly from multiple coils. Each of three dual coils fires two cylinders-- one on its compression stroke, the other 360 degrees away on its exhaust stroke. High voltage spark distribution through a mechanical distributor is eliminated, along with inherent inaccuracies and misfires. No laptop required for the xdi ignition. Kits include: xdi ignition, wire harness, crank sensor, cran...(choose a part on the right to read more)
General Fitment 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89
$1,913.62
Make a selection
Refresh the missing horsepower with a brand new set of pistons and cylinders. Restore the lost compression that reringing will never accomplish. Other kits available for large displacement.
Known as: cylinder with piston complete group 5
View/Change Diagram
"brombacher" 996 GT2 titanium exhaust system with 200 cells titanium tri-metal catalytics.
Facts:
- + 25 crank hp & + 19 crank torque
- 100-105 db sound level
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9 kg)
- 2 x 3.5"(90mm) titanium tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 60...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$9,835.10
Make a selection
Exhaust system with valves for the 997 -08
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 21 hp & + 12 lb.-ft torque gain with exhaust system only. Based on 997s.
- weighs 62 lbs.(28,0 kg).
- includes valves for stock sound and a true GT3 cup like race sound!
Genuine:
Engine - 6 cylinder boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kw (355hp) @ 6600rpm
Max. Torque - 400nm (295lbf ft) @ 4600rpm
Max. Speed - 293km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 4.8s
Tuning (incl...(choose a part on the right to read more)
General Fitment 911 2005-08
$9,385.20
Make a selection
Brombacher (sound version) stainless steel mufflers
Facts (based on 997s):
- + 5 crank hp & + 2 crank torque
- 2 1/2 (63.5 mm) diameter tubing (reduces thermal stress)
- weighs 33 lbs. (15,0 kg)
- t 316 stainless steel for improved durability over t 304
- factory stamped for true Porsche sound
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- reuses factory tips or any aftermarket tip designed to fit OEM exhaust. (3.6l mod. Need 3.8l tips)
- no dme programming necessary
Figures (based on 997s):
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 440...(choose a part on the right to read more)
General Fitment 911 2009-12
$2,581.70
Make a selection
Kw variant 3 coilover kit with front hls 2 lift system Porsche 997 c4 05+
The new variant 3 is state-of-the-art technology for the skilled and experienced driver. The separate and independent compression and rebound dampening options allow a truly individual driving set-up. These unique systems with the 3 individually adjustable components, allows for adjustment of the compression of the damper in the low-speed range, while the highspeed set-up, so decisive for driving comfort, has been preset by our engineers.
features:
- independently adjustable dampening technology -rebound and compression dampening
- inox-line stainless steel technology at no extra charge
- individual height adjustmen...(choose a part on the right to read more)
General Fitment 911 2005-08
$11,311.64
Make a selection
"brombacher" stainless steel exhaust system for the 997-2
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- weighs 72 lbs.(33,0 kg).
the stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg).
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 4400rpm
Max. Speed - 300km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/...(choose a part on the right to read more)
General Fitment 911 2009-12
From $7,731.90
Make a selection
Ksport kontrol pro fully adjustable coilover kits provide the ultimate in suspension technology for your street or track car. 36 levels of dampening adjustment allow you to fine tune the ride to your handling and comfort needs. The dampening adjusts compression and rebound simultaneously for ease of adjustment. Pillow ball top mounts in the front and rear on some applications allow you to maintain vehicle manufacturer suspension geometry design. The pillow ball top mounts also allow you a more direct feel for solid driver response. Camber adjustability is included on pillow ball top mounts that allow it for the ability to adjust camber from the actual coilover, instead of a separate camber kit.
Most appli...(choose a part on the right to read more)
General Fitment 911 1998-05
$2,049.30
Make a selection
Ksport kontrol pro fully adjustable coilover kits provide the ultimate in suspension technology for your street or track car. 36 levels of dampening adjustment allow you to fine tune the ride to your handling and comfort needs. The dampening adjusts compression and rebound simultaneously for ease of adjustment. Pillow ball top mounts in the front and rear on some applications allow you to maintain vehicle manufacturer suspension geometry design. The pillow ball top mounts also allow you a more direct feel for solid driver response. Camber adjustability is included on pillow ball top mounts that allow it for the ability to adjust camber from the actual coilover, instead of a separate camber kit.
Most appli...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$2,049.30
Make a selection
Kit includes:
Tuning-chip, power-flow kit, sport catalytic kit, sport camshafts, mechanical rockerarms, sprocket wheels modification kit, FVD / mahle 3.8l piston and cylinder kit with 11,8:1 compression ratio.
General Fitment 911 1994-98
From $14,816.48
Make a selection
Kit includes:
Tuning-chip, power-flow kit, sport catalytic kit, sport camshafts, mechanical rockerarms, sprocket wheels modification kit, FVD / mahle 3.8l piston and cylinder kit 11,8:1 compression ratio
General Fitment 911 1994-98
From $14,323.19
Make a selection
Kit includes:
Sport-motronic dme exch., power-flow kit, 5.0bar fuel presure reg., turbocharger k24-race l/r, sport camshaft l/r, mechanical rockerarm kit, sprocket wheels modification kit.
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 8,5:1
Max. Power - 300kw (408hp) @ 5750rpm
Max. Torque - 540nm (398lbf ft) @ 4500rpm
Max. Speed - 290km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 4.5s
Tuning:
Max. Power - 386kw (525hp) @ 5500rpm
Max. Torque - 720nm (531lbf ft) @ 4500rpm
Max. Speed - 325km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 3.9s
*power with 525hp only with sport catalytic set(210 111 993 10), secondary oil coller(FVD 207 035) and inte...(choose a part on the right to read more)
General Fitment 911 1994-98
$19,792.30
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|