PORSCHE 924S VELOCITY
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
More air = more power! Ipd plenum's patented, cast aluminum "y" style plenum increases horsepower and torque by optimizing airflow into the intake manifold. The factory plastic "t" style intake creates airflow turbulence, which deprives the motor of air, robbing hp and torque. Ipds "y" style plenum smoothly channels the airflow towards the left and right cylinder banks. The engine receives a larger mass of air at a higher velocity, which equates to increases in hp and torque across the entire rev range. The end result is improved acceleration and increased boost response (on turbo vehicles). Ipd plenum's provide dyno proven results and are a simple and cost effective way to increase power. Want more pow...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $1,045.00
Make a selection
This is a universal air filter system that can replace your restrictive air box and filter. The carbon-air box improves the volume of air and increases the velocity. In some applications it can increase horsepower up to 25 ps (23 hp) and will also provide you with better throttle response. It is a universal filter and can be used on most vehicles in place of the original air box (with modifications, if necessary). This filter is not typically intended for street use and is designed for race use. Not for Boxster s, 993tt, GT2! Please note: sold individually. Dual intake systems will require two units. Specifications: 85mm, does not include a sensor cut out.
This item may need to be sourced from Germany and wo...(choose a part on the right to read more)
More air = more power!
Ipd plenum?s patented, cast aluminum ?y? Style plenum increases horsepower and torque by optimizing airflow into the intake manifold.
The factory plastic ?t? Style intake creates airflow turbulence, which deprives the motor of air, robbing hp and torque. Ipds ?y? Style plenum smoothly channels the airflow towards the left and right cylinder banks. The engine receives a larger mass of air at a higher velocity, which equates to increases in hp and torque across the entire rev range. The end result is improved acceleration and increased boost response (on turbo vehicles).
Ipd plenum?s provide dyno proven results and are a simple and cost effective way to increase power.
Want mo...(choose a part on the right to read more)
General Fitment CAYMAN 2009-12
$1,160.70
Make a selection
Ipd intake plenum Porsche 996 3.6l 02-04
The ipd plenums are a unique design that dramatically increases horsepower and torque by optimizing air flow efficiency. Air flow is managed through a diversion splitter that maximizes air speed into the engine. The charged intake air maintains a higher velocity by replacing the factory plastic "t" intake with a stronger and more efficient cast aluminum "y" design. This unique "y" style plenum optimizes flow, improving acceleration and boost response. The new ipd replacement plenum eliminates the turbulent air flow by smoothly splitting and diverting the air flow and directing it towards the cylinders at a much higher air speed. This simple bolt-on plenum upg...(choose a part on the right to read more)
General Fitment 911 1998-05
$1,208.25
Make a selection
Ipd intake plenum Porsche 997 3.6l 05+
The ipd plenums are a unique design that dramatically increases horsepower and torque by optimizing air flow efficiency. Air flow is managed through a diversion splitter that maximizes air speed into the engine. The charged intake air maintains a higher velocity by replacing the factory plastic "t" intake with a stronger and more efficient cast aluminum "y" design. This unique "y" style plenum optimizes flow, improving acceleration and boost response. The new ipd replacement plenum eliminates the turbulent air flow by smoothly splitting and diverting the air flow and directing it towards the cylinders at a much higher air speed. This simple bolt-on plenum upgra...(choose a part on the right to read more)
General Fitment 911 2005-08
$1,208.25
Make a selection
The headers on this latest 991 system include a double plated flange. This flange dissipates heat and vibration more efficiently and consequently does not warp like thicker single plate flanges commonly used by others. This small advancement is time consuming to make but is added in order to prevent loss of power over time and will ensure years of trouble free operation even under severe track conditions.
The header piping incorporates a 2 3/4" motorsports style merge collector. The collector smooths out exhaust flow and turbulence created from the 3 primary pipes merging into one. Collectors create more velocity, which reduces back pressure and creates torque. This systems collector gently guides ex...(choose a part on the right to read more)
General Fitment 911 2009-12
From $7,707.70
Make a selection
Ipd intake plenum Porsche 997 s 3.8l 05+
The ipd plenums are a unique design that dramatically increases horsepower and torque by optimizing air flow efficiency. Air flow is managed through a diversion splitter that maximizes air speed into the engine. The charged intake air maintains a higher velocity by replacing the factory plastic "t" intake with a stronger and more efficient cast aluminum "y" design. This unique "y" style plenum optimizes flow, improving acceleration and boost response. The new ipd replacement plenum eliminates the turbulent air flow by smoothly splitting and diverting the air flow and directing it towards the cylinders at a much higher air speed. This simple bolt-on plenum upg...(choose a part on the right to read more)
General Fitment 911 2005-08
$1,208.25
Make a selection
- + 15 crank hp & + 14 crank torque.
- 2 ½? (63.5 mm) diameter tubing (reduces thermal stress).
- 27 lbs. (12 kg) weight savings.
- reuses OEM headers and cats (no cel, retains OEM software).
- intoxicating growl at idle, partial throttle and wide open throttle.
- no ecu software programming necessary.
- includes dual ?black edition? 3.5? Ceramic-coated tips.
- made in Germany.
In our relentless quest to meet all of our customers exhaust needs; we wanted to create a special "black edition" system that retains the OEM headers and cats. The benefits are 3 fold, you can pass emissions with ease, you don?t need to run a software file (for those who are concerned about warranty) and you have a beauti...(choose a part on the right to read more)
General Fitment BOXSTER 2009-11
$2,750.70
Make a selection
- + 15 crank hp & + 14 crank torque.
- 2 ½? (63.5 mm) diameter tubing (reduces thermal stress).
- 22 lbs. (10 kg) weight savings.
- replaces OEM valved Porsche® sport exhaust (pse).
- reuses OEM headers and cats (no cel, retains OEM software).
- intoxicating growl at idle, partial throttle and wide open throttle with the valves open. Factory quiet with them closed!
- no ecu software programming necessary.
- includes dual ?black edition? 3.5? Ceramic-coated tips.
- made in Germany.
In our relentless quest to meet all of our customers exhaust needs; we wanted to create a special "black edition" system that retains the OEM headers and cats. The benefits are 3 fold, you can pass emissions with eas...(choose a part on the right to read more)
General Fitment BOXSTER 2009-11
$4,351.75
Make a selection
M&m street-sport muffler system for 2009- 997.2 / 997.2s
Facts:
- + 15 crank hp & + 13 crank torque
- 2 ½” (63.5 mm) diameter tubing (reduces thermal stress)
- replaces OEM primary and secondary mufflers
- reuses OEM headers and 600 cell cats (no cel, retains OEM software)
- weighs 20.94 lbs. (9.5 kg)
- 33 lb. Weight savings over factory system
- t 316 stainless steel for improved durability over t 304
- uses the spring lock race system design to dampen vibration
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary
-reuses factory tips or any aftermarket tip designed to fit OEM exhaust (3.6 l models will require 3.8 l tips due to diameter diff...(choose a part on the right to read more)
General Fitment 911 2005-08
$2,660.90
Make a selection
M&m street-sport pdk muffler for 2009- 997.2 / 997.2s
Facts:
- + 18 crank hp & + 15 crank torque
- 2 ½” (63.5 mm) diameter tubing (reduces thermal stress)
- weighs 42 lbs. (19.5 kg)
- replaces OEM primary and secondary mufflers
- reuses OEM headers and 600 cell cats (no cel, retains OEM software)
- t 316 stainless steel for improved durability over t 304
- intoxicating growl at idle, partial throttle and wide open throttle. This system was designed for pdk cars as it has zero drone inside the cabin. It is also perfect for those who are interested in our street sport system but find it a little to loud for their liking.
- no dme programming necessary
-reuses factory tips or any aftermarket tip d...(choose a part on the right to read more)
General Fitment 911 2005-08
$3,529.90
Make a selection
You don't have to spend a $1000+ for improved acceleration and a cool exhaust note. The dream 2 exhaust unit will add power and that exotic exhaust you've been looking for. The dream 1 stands for "dual-radius-exhaust-accumulator-1" and replaces the factory exhaust "t" piece which dumps the exhaust into the center outlet; the big problem is that it dumps both exhaust flows directly opposed to each other where it causes exhaust turbulence. The dream 1 is made of curves pipe which naturally flows the exhaust into one direct stream which increases exhaust velocity and power. As it flows, it adds a new resonance to the exhaust that's missing in the factory system. Tests have shown as much as 5.3 additional re...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08 CAYMAN 2006-08
Gruppe m ram air intake system Porsche 964 Carrera 88-93
The gruppem ram air intake system was created to improve efficiency by reducing the restrictions of a stock intake. A factory intake system is designed to minimize cost and reduce noise within the cabin, but these tradeoffs also sacrifice performance. To increase efficiency and power, gruppem has worked to reduce restriction and decrease the intake air temperature. Colder air is denser allowing the intake system to move a larger volume of air and in turn make more power. The shape of the duct and filter are designed specifically to increase the velocity of the air and increase the pressure, while at the same time fitting within engine bays cramped ...(choose a part on the right to read more)
General Fitment 911 1987-89
$2,175.08
Make a selection
This item is in stock and ready to ship!
The gruppem ram air intake system was created to improve efficiency by reducing the restrictions of a stock intake. A factory intake system is designed to minimize cost and reduce noise within the cabin, but these tradeoffs also sacrifice performance. To increase efficiency and power, gruppem has worked to reduce restriction and decrease the intake air temperature. Colder air is denser allowing the intake system to move a larger volume of air and in turn make more power. The shape of the duct and filter are designed specifically to increase the velocity of the air and increase the pressure, while at the same time fitting within engine bays cramped space. Carbon f...(choose a part on the right to read more)
General Fitment 911 1998-05
$3,365.42
Make a selection
Gruppe m ram air intake system Porsche 996 GT2 01-05
The gruppem ram air intake system was created to improve efficiency by reducing the restrictions of a stock intake. A factory intake system is designed to minimize cost and reduce noise within the cabin, but these tradeoffs also sacrifice performance. To increase efficiency and power, gruppem has worked to reduce restriction and decrease the intake air temperature. Colder air is denser allowing the intake system to move a larger volume of air and in turn make more power. The shape of the duct and filter are designed specifically to increase the velocity of the air and increase the pressure, while at the same time fitting within engine bays cramped spac...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$4,045.05
Make a selection
Gruppe m ram air intake system Porsche 997 Carrera incl. 4s 05-09
The gruppem ram air intake system was created to improve efficiency by reducing the restrictions of a stock intake. A factory intake system is designed to minimize cost and reduce noise within the cabin, but these tradeoffs also sacrifice performance. To increase efficiency and power, gruppem has worked to reduce restriction and decrease the intake air temperature. Colder air is denser allowing the intake system to move a larger volume of air and in turn make more power. The shape of the duct and filter are designed specifically to increase the velocity of the air and increase the pressure, while at the same time fitting within engine bays...(choose a part on the right to read more)
General Fitment 911 2005-08
$4,045.05
Make a selection
Combined with our proprietary software and exhaust (including sport cats) you can achieve 720 crank hp (720 ps) and 693 crank lb.-ft. (940 nm) of torque!
Turbo facts:
- increased velocity & reduced backpressure manifold (header) is included for plug and play installation.
- new, lightened and larger compressor wheels for up to 45% more power than OEM turbo power.
- housings are larger for higher flow and reduced backpressure.
- extremely high quality, German made turbos ensure years of trouble free operation.
- brand new turbos, not remanufactured.
- free software update included for those already running FVD software.
Our turbos are built for every day drivability and reliability that you expect ...(choose a part on the right to read more)
General Fitment PANAMERA 2010-14
$12,575.38
Make a selection
Product details:
Performance headers improve exhaust flow and sports car sound; sport headers include 200-cell hjs sport catalytic converters.
Features:s
-fits all Porsche 997.2 Carrera vehicles 2009-2011
-improves power by 13 whp and 16 ft-lbs. Of torque at 4500 rpm
-saves 4 lbs from the rear of the vehicle
-includes German-imported 200-cell hjs sport catalytic converters for maximum performance
-investment-cast f1/alms/nascar high-velocity 3-into-1 merge collectors for maximum performance
-constructed from high-quality 14-16 gauge c.n.c. Mandrel-bent t304l stainless steel for optimum flow and maximum durability
-direct replacement for the restric...(choose a part on the right to read more)
General Fitment 911 2009-12
From $2,995.00
Make a selection
Product details:
Complete high-performance exhaust & intake solution for the 911 turbo 930; includes dual outlet muffler with dual or quad style deluxe tips, sport headers with heat and air intake system.
Includes:
-911 turbo (930) dual outlet muffler (incl. Deluxe dual or quad style tips)
-911 turbo (930) sport headers with heat
-911 turbo (930) air intake system
Features:
-fits all Porsche 911 turbo 930 vehicles (1976-1989)
-increases horsepower and torque by 46 whp and 33 ft-lbs
-dramatically improves sports car sound with a deeper exhaust note.
-constructed from t304 stainless steel, 14-16 gauge c.n.c. Mandrel bent high v...(choose a part on the right to read more)
General Fitment 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89
From $4,050.00
Make a selection
Product details:
Loud & aggressive sports car sound with adjustable single or dual outlets
Features:
-fits all Porsche 964 c2, c4, rs america, euro rs and speedster vehicles 1989-199
-increases horsepower and torque by 24 whp and 21 ft-lbs without optional sport cats expect a great increase in power when including them.
-loud & aggressive sports car sound. Recommended for aggressive street and track usage.
-rsr-style 1 piece equal length mandrel-bent header tubes with f1 style high velocity 3-into-1 pyramidal investment cast merge collectors.
-constructed from 14-16 gauge t304l stainless steel
-dual outlet muffler system comes with all r...(choose a part on the right to read more)
General Fitment 911 1989-94
From $2,795.00
Make a selection
FVD primary muffler bypass system for 2009- 997/997s
Fit with and without factory sport valved exhaust !
Facts (based on 997s):
- + 5 crank hp & + 4 crank torque gain
- 2 1/2" (63.5 mm) diameter tubing (reduces thermal stress)
- 5.5 lbs weight savings
- t 316 stainless steel for improved durability over t 304
- adjustable design for easy installation
- includes quick release clamps
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary
- fits with or without sound switch system
- weight: 4.6kg (10.14lbs)
Figures (based on 997s):
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power...(choose a part on the right to read more)
General Fitment 911 2005-08
$1,543.30
Make a selection
Product details:
Equal-length performance headers improve exhaust flow and sports car sound; sport headers include 200-cell hjs sport catalytic converters.
Features:
-fits all 986 Boxster / s vehicles (1997-2004), slight modifications to the factory coolant line are required on vehicles equipped with a tiptronic transmission.
-includes 200-cell hjs sport catalytic converters for maximum performance
-adds 8 whp and 4 ft-lbs of torque when installed with fabspeed’s maxflo performance exhaust system
-equal length cnc mandrel-bent primary tubes and f1-style high velocity merge collectors ensure maximum flow characteristics
-simple ...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
From $2,895.00
Make a selection
Fabspeed;s performance headers are perfect for the 987.2 owner looking for more power across the entire rpm range and a more aggressive exhaust sound. Their 304 stainless system features mandrel bends that are optimized for maximum flow.
Features
Fits all 987.2 Boxster/Cayman/spider vehicles 09-12
Gaskets included.
Equal length t304 stainless steel c.n.c. Mandrel bent header pipes for better torque and equalized engine pulsing and maximum exhaust flow.
F1/nascar/indycar style high velocity merge collectors.
More power and torque across the rpm band and dramatically improved sports car sound.
Simple and easy direct bolt-on replacement headers for all stock 987 headers....(choose a part on the right to read more)
General Fitment BOXSTER 2009-11 CAYMAN 2009-12
$3,921.95
Make a selection
Product details:
High-quality performance headers provide better boost response and power throughout the rpm range.
Features:
-fits all 993 turbo / turbo s vehicles (1995-1998)
-increases horsepower by 15 whp and improves throttle response
-saves 9 lbs from the rear of the vehicle
-available with or with out heat exchange
-features high velocity 3-into-1 pyramidal inverted cast merge collectors for improved exhaust scavenging.
-constructed from high-quality 14-16 gauge c.n.c. Mandrel-bent t304l stainless steel for optimum flow and maximum durability
-all fabspeed performance products are backed by the fabspeed lifetime ...(choose a part on the right to read more)
General Fitment 911 1994-98
From $1,895.00
Make a selection
Fabspeed have designed a sport header with 200 cell high flow catalytic converters that are a great add on to any 991 Carrera. Fabspeed headers are a direct replacement for the OEM components and will bolt to the OEM primary resonator or any aftermarket bypass setup designed from the OEM specs. Sport headers are great for any daily driver, or choose fabspeed's race headers without catalytic converters as the best option for any track oriented Carrera.
Features
Improved power and throttle response throughout the rpm range
High quality 14-16 gauge c.n.c. Mandrel bent t304l stainless steel equal length primary pipes
Investment cast f1/alms/nascar high velocity 3-into-1 merge collector...(choose a part on the right to read more)
General Fitment 911 2009-12
$3,921.95
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|