PORSCHE 997 BUILD
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
General Fitment 911 1984-86 911 1987-89
Two required.
View/Change Diagram
From $27.87
Make a selection
From $39.74
Make a selection
Known as: tachometer - send us your tachometer and we will have it rebuilt. Price will be quoted once the rebuilder determines the cost of repair.
View/Change Diagram
Known as: high build coating epoxy f90
View/Change Diagram
914
General Fitment 914 1970-76 911 1970-73
There are not many warning signs of an impending ims failure short of a “death rattle” that occurs as the bearing fails and comes apart. These kits replace the factory sealed bearing with a new, severe duty custom ceramic hybrid roller ball bearing for reduced friction and superior performance in poorly lubricated operating conditions and replaces the factory ims flange hub, bearing support, and fastener with a stronger, revised billet chromoly assembly. The center bearing support also receives an increase in size and no longer is cut for the o-ring that keep engine oil from leaking out of the engine - we have relocated the o-ring to the ims hub flange for added strength to the center stud & bearing support...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08 BOXSTER 1997-04 911 1998-05 911 1987-89
Power slot rear right slotted rotor Porsche Boxster 97-04
Porsche is known for their racing heritage and dedication to maximum performance, making them one of the most respected marquees in the automotive industry. Classic looks, modern performance, and German engineering set it apart from mass produced cars. Unfortunately many vehicles braking systems are compromised in regards to performance to reduce costs. A factory brake system is designed to handle normal stop and go traffic, not continuous aggressive braking in high temperature situations.
What good is power without control? The ability to stop quickly is just as important as accelerating quickly, especially on a race track. As any weekend r...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
Power slot rear left slotted rotor Porsche Boxster 97-04
Porsche is known for their racing heritage and dedication to maximum performance, making them one of the most respected marquees in the automotive industry. Classic looks, modern performance, and German engineering set it apart from mass produced cars. Unfortunately many vehicles braking systems are compromised in regards to performance to reduce costs. A factory brake system is designed to handle normal stop and go traffic, not continuous aggressive braking in high temperature situations.
What good is power without control? The ability to stop quickly is just as important as accelerating quickly, especially on a race track. As any weekend ra...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
Porsche Boxster, Cayman, and 911 (986/987/996) ln spec k1 connecting rods for 2.5, 2.7, 3.2, & 3.4 m96/m97 engines. Replaces factory connecting rod part number 99610397501.
Designed as a performance replacement lightweight connecting rod for added strength to prevent on-track failures common to the stock m96/m97 connecting rod.
Don't risk a connecting rod failure on your $15-20k rebuild. The factory connecting rod utilized in the m96 and m97 engine is manufactured using a powdered metal process and feature cracked caps. This method of manufacturing helps reduce cost, but results in a connecting rod with a limited fatigue life and that is not rebuildable.
Suitable for stock, street driven rebuilds or b...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04 BOXSTER 2005-08 CAYMAN 2006-08 911 1998-05
$1,185.00
Make a selection
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche® engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche® engine naturally led to our engine management software. Over the years we have perfected the art of software tuning, making substantial gains in horsepower and torque, while retaining drivability and most importantly reliability.
Here is a small sample of our software advancements versus what is available on the market?
FVD software vs. The competition
- software programming can be done in the comfort and privacy of your own home or by one of our recommended dealers.
- you receive the FVD software file and the original (oem) software file f...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,584.70
Make a selection
"brombacher" exhaust system for 997 GT3/rs (sound version) with rsr style tips
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 71 lbs. (32,2 kg)
- 15.5 lb (7 kg) weight savings over stock
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- 2 x 2 3/4" (70mm) angle cut rsr center exit tips
- made in Germany
- 98 db (98db at idle and partial throttle, builds to 100db at wot)
- intoxicating growl at idle, partial throttle and wide open ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$8,507.40
Make a selection
Kit includes:
Software dme exch., sport air filter
Please note: this dme cannot be flashloaded. Dme must be sent to us.
Genuine:
Engine - 6 cylinder boxer
Capacity - 2480ccm
Compression ratio - 11,0:1
Max. Power - 150kw (204hp) @ 6000rpm
Max. Torque - 245nm (181lbf ft) @ 4500rpm
Max. Speed - 240km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 6.9s
Tuning:
Max. Power - 158kw (215hp) @ 6000rpm
Max. Torque - 260nm (192lbf ft) @ 4500rpm
Max. Speed - 247km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 6.7s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our en...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,053.80
Make a selection
Genuine:
Engine - 6 cylinder boxer
Capacity - 2480ccm
Compression ratio - 11,0:1
Max. Power - 150kw (204hp) @ 6000rpm
Max. Torque - 245nm (181lbf ft) @ 4500rpm
Max. Speed - 240km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 6.9s
Tuning:
Max. Power - 158kw (215hp) @ 6000rpm
Max. Torque - 260nm (192lbf ft) @ 4500rpm
Max. Speed - 247km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 6.7s
Please note: this dme cannot be flashloaded. Dme must be sent to us.
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfec...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,094.50
Make a selection
Kit includes:
Software ecu software (flashclient cable), sport air filter, sport header system.
Some models require oxygen sensor relocation.
Genuine:
Engine - 6 cylinder boxer
Capacity - 2687ccm
Compression ratio - 11,0:1
Max. Power - 162kw (220hp) @ 6400rpm
Max. Torque - 260nm (192lbf ft) @ 4750rpm
Max. Speed - 250km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 6.6s
Tuning:
Max. Power - 178kw (242hp) @ 6500rpm
Max. Torque - 290nm (214lbf ft) @ 5000rpm
Max. Speed - 261km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 6.3s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,901.90
Make a selection
This K&N performance gold filter fits the billet full-flow spin-on filter adapter kit, part number r10601. This filter uses a synthetic resin impregnated filter media capable of filtering lower micron particles while not restricting oil flow. Performance gold oil filters are designed to satisfy the needs of racers and engine builders as well as the average vehicle owner who wants the best oil filter available. K&N cartridge oil filters trap harmful contaminants while the filter’s construction allows for high oil flow rates. All K&N oil filters are manufactured to meet stringent engineering standards. They are covered by a limited warranty to be free from defects in materials and workmanship when installed and...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04 BOXSTER 2005-08 CAYMAN 2006-08 911 2005-08 911 1998-05
Kit includes:
Software ecu software (flashclient cable), power-flow kit, sport header system, sportmuffler (2x90mm tips).
Some models require oxygen sensor relocation.
Genuine:
Engine - 6 cylinder boxer
Capacity - 2687ccm
Compression ratio - 11,0:1
Max. Power - 162kw (220hp) @ 6400rpm
Max. Torque - 260nm (192lbf ft) @ 4750rpm
Max. Speed - 250km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 6.6s
Tuning:
Max. Power - 184kw (250hp) @ 6500rpm
Max. Torque - 300nm (221lbf ft) @ 5000rpm
Max. Speed - 265km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 6.1s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$3,943.50
Make a selection
Racingbrake rotors are engineered and manufactured to meet the needs of the performance enthusiasts. from 3d cad design to tooling development, casting, machining, and surface coating, rb controls all production processes to insure quality, performance, and value. Their patented designs, combined with proprietary alloyed cast iron and precision machining assure you that rb brake products will achieve the highest level of performance.
These two-piece rotors were engineered to be the best stock replacement two-piece rotor on the performance market. This rotor is direct bolt-on, easy to install, no additional hardware needed, and an excellent upgrade for both street and track. Not only will the rotors last ...(choose a part on the right to read more)
General Fitment 911 1998-05 911 2005-08 BOXSTER 1997-04 BOXSTER 2005-08
$1,213.65
Make a selection
Kit includes:
Software dme, power-flow kit, sport header system, sportmuffler.
Please note: this dme cannot be flashloaded. Dme must be sent to us.
Some models require oxygen sensor relocation.
Genuine:
Engine - 6 cylinder boxer
Capacity - 2480ccm
Compression ratio - 11,0:1
Max. Power - 150kw (204hp) @ 6000rpm
Max. Torque - 245nm (181lbf ft) @ 4500rpm
Max. Speed - 240km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 6.9s
Tuning:
Max. Power - 169kw (230hp) @ 6000rpm
Max. Torque - 280nm (207lbf ft) @ 5500rpm
Max. Speed - 255km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 6.4s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. ...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$4,261.40
Make a selection
Wedge engineering has been making seat brackets for over 35 years. They know how important quality is, and how that plays into safety. Each bracket that they make is custom made to order out of the highest quality steel available. You don't need some flimsy rail being the only thing holding you and your race seat into the car. Seat rails are incredibly important to you and your cars safety. Wedge engineering has developed a seat bracket perfect for use with a variety of aftermarket racing seats including; scat, recaro, sparco, status racing, momo, flofit, nrg, 3a racing and many more.
Average build time is 4-5 weeks.
General Fitment 911 1998-05 BOXSTER 1997-04 CAYMAN 2006-08
Re-ringing your m96 or m97 engine isn't even an option for most rebuilds, however most engine builders re-ring engines after only doing a visual inspection of cylinder bores rather than measuring the cylinders for ovality and taper. It is a guarantee if the engine has not been sleeved, the bores are out of spec on even a "fresh" rebuild.
Through ln engineering's exclusive nickies sleeving process, we have overcome the d-chunk, slipped-sleeve, scoring, as well as taper and ovality issues associated with Porsche 986/996 and later 987/997 models.
General Fitment BOXSTER 1997-04
$99,999.00
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|