PORSCHE 993 MUFFLER INSTALL KIT
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
This kit consists of all the proper hardware to install heat exchangers and a muffler, including the rare copper locking nuts to ensure a perfect installation. Remember to install the exchangers one at a time and torque in an x pattern to 18 ft lbs.
Note: before ordering any 914 exhaust component, make sure you check the style of heat exchangers to determine the correct system for your car. Since all four cylinder exchangers/mufflers fit all 914s, you may not have the same muffler and components originally fitted to your car. It is advised to match an exhaust system and gasket kit to the style of heat exchangers and not the year of car or engine.
- 1970-73 1.7/1.8l models have heat exchangers that turn up...(choose a part on the right to read more)
General Fitment 914 1970-76
The perfect compromise for you and your loved ones. Rich, deep race car tones with the valves open and soft subtle, completely stock sounds with them closed. Torque is better than our other systems in the low range with the valves closed and horsepower is better with the valves open. Made for mid-range and top end performance with the added beauty of 3.5" (90mm) dual exhaust tips! + 27 crank hp & +25 crank torque (on average). - 2.9 tubing (75 mm) at the widest point. Primaries are 2.5" (64mm). - 200 cell hjs "hf" trimetallic catalytic converters. - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - 3.5" (90 mm) dual oval, double walled polished tips included. - dual high quality ...(choose a part on the right to read more)
General Fitment 911 1994-98
From $11,730.62
Make a selection
Our street version muffler set is perfect for those more concerned with a quality Porsche flat 6 sound rather than just an increase in decibels. This is the perfect addition for a cabriolet, for those concerned about drone, or for those interested in a quality flat 6 exhaust note without drawing to much attention. These are also ideal for anyone planning or running sport cats or bypass as they will offer more dampening so that extreme decibels are not experienced. These mufflers also pass the strict decibel limits set by the German TUV and they include TUV certification. Features: - + 8 crank hp & + 8 crank torque - weighs 35.7 lbs. (16.2 kg) - German v2a - x5crni18-10 - 1.4301 (t304) stainless steel for improv...(choose a part on the right to read more)
General Fitment 911 1998-05
From $1,807.30
Make a selection
This kit deletes the side mufflers and drop approximately 20 lbs weight from your car.
- sound improvement +12db
- weight saving -20 lbs
- easy installation
Fits: GT3 rs, 4l, 368kw (11-), 3.8l, 331kw (10-), GT3, 320kw (10-), 3.6l, 305kw (07-09)
General Fitment 911 GT3 2007-11
Kit includes: 2 x sport motronic dme (ecu) exchange 2 x sport airfilter 1 x sport exhaust system genuine: engine - v10 cylinder capacity - 5733ccm compression ratio - 12,0:1 max. Power - 450kw (612hp) @ 8000rpm max. Torque - 590nm @ 5750rpm max. Speed - 330km/h max. Rpm - 8400rpm acceleration 0-100km/h - 3.9s tuning: max. Power - 496kw (675hp) @ 8000rpm max. Torque - 670nm (495 lbf ft) @ 6000rpm max. Speed - 345km/h max. Rpm - 8600rpm acceleration 0-100km/h - 3.7s FVD dme / ecu programming philosophy: for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. ...(choose a part on the right to read more)
$17,032.10
Make a selection
Brombacher racing exhaust system for 997gt3/rs
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell hdl German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 42 lbs. (19 kg)
- 44.5 lb (20 kg) saving?s over stock system!
- t 316 stainless steel for improved durability over t 304
- reuse?s factory center muffler for backpressure and resonance dampening.
- includes all necessary clamps and mounting brakets
- made in Germany
- 106 db
- intoxicating growl at idle, partial throttle and wide open throttle
- reuse?s factory tips or larger aftermarket tips
- dme programming not ne...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $4,665.10
Make a selection
Brombacher race exhaust system with valves for 997 GT3/rs with rsr style tips
Facts:
- + 25 crank hp & + 18 crank torque with valves closed
- 200 cell high flow, tri metal German hjs "hd" sport catalysts**
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 37.2 lbs. (16.9 kg) this is the lightest valved system in the Brombacherline !**
- 49.3 lb (22.3 kg) savings over stock system!**
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- made in Germany
- 110 db with valves open (not for faint of heart!)
- 103 db with valves closed
- into...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$6,106.10
Make a selection
Brombacher racing exhaust system for 997gt3/rs with 90mm x 2 round tips
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 42 lbs. (23 kg)
- 44.5 lb (19 kg) savings over stock system!
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brakets
- made in Germany
- 108 db
- intoxicating growl at idle, partial throttle and wide open throttle
- dme programming necessary on 997.2 GT3
The FVD GT3 race exhaust gives the 997 GT3 a more pronounced, aggre...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $6,698.73
Make a selection
Exhaust system with valves for the 997 -08
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 21 hp & + 12 lb.-ft torque gain with exhaust system only. Based on 997s.
- weighs 62 lbs.(28,0 kg).
- includes valves for stock sound and a true GT3 cup like race sound!
Genuine:
Engine - 6 cylinder boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kw (355hp) @ 6600rpm
Max. Torque - 400nm (295lbf ft) @ 4600rpm
Max. Speed - 293km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 4.8s
Tuning (incl...(choose a part on the right to read more)
General Fitment 911 2005-08
$9,385.20
Make a selection
- + 25 crank hp & + 27 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts. Cats are located behind the muffler for even greater hp & torque.
- equal length header set up with merge collector for maximum torque gain
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 64.3 lbs. (29,2 kg)
- t 316 stainless steel for improved durability over t 304
- 2 x 3"(90mm) round tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- 105.7 db
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
Weight savings:
997 GT3 OEM exhaust weight:
Stock primary ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$8,549.20
Make a selection
"brombacher" racing exhaust system for 997gt3/rs
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weights 6 kg
- 33 kg savings over stock system!
- t 316 stainless steel for improved durability over t 304
- reuse?s factory center muffler for backpressure and resonance dampening.
- includes all necessary clamps and mounting brakets
- made in Germany
- 108 db
- intoxicating growl at idle, partial throttle and wide open throttle
- reuse?s factory tips or larger aftermarket tips
- no dme programming neces...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$11,661.10
Make a selection
Brombacher edition valved mufflers are the perfect compromise for you and your loved ones. This set of mufflers offers PorscheĀ® cup car like decibels with low, deep tones along with gurgling and crackling with the valves open. Mayhem can then be reined in, to subtle, OEM decibels with the valves closed. So, the best of both worlds are on tap for many happy PorscheĀ® excursions.
+ 10 hp & + 8 tq gain.
- 2 1/2" (63.5 mm) tubing diameter (reduces thermal stress).
- t 316 stainless steel for improved durability over t 304.
- absolutely no drone in the cabin with or without the valves open.
- does not interfere with emissions and will not trigger the check engine light.
- ecu programming (software) is n...(choose a part on the right to read more)
General Fitment 911 2005-08
$3,174.70
Make a selection
Brombacher (sound version) stainless steel mufflers
Facts (based on 997s):
- + 5 crank hp & + 2 crank torque
- 2 1/2 (63.5 mm) diameter tubing (reduces thermal stress)
- weighs 33 lbs. (15,0 kg)
- t 316 stainless steel for improved durability over t 304
- factory stamped for true Porsche sound
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- reuses factory tips or any aftermarket tip designed to fit OEM exhaust. (3.6l mod. Need 3.8l tips)
- no dme programming necessary
Figures (based on 997s):
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 440...(choose a part on the right to read more)
General Fitment 911 2009-12
$2,581.70
Make a selection
- + 25 crank hp & + 19 crank torque (manufacturer estimate, dyno testing information will be available shortly)
- 200 cell high flow, tri metal German hjs sport catalysts. Cats are located behind the muffler for even greater hp & torque.
- equal length header set up with merge collector for maximum torque gain
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 64.3 lbs. (29,2 kg)
- t 316 stainless steel for improved durability over t 304
- 2 x 2 3/4"(70mm) round tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- 105.7 db
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programm...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$9,179.50
Make a selection
"brombacher" stainless steel exhaust system for the 997-2
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- weighs 72 lbs.(33,0 kg).
the stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg).
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 4400rpm
Max. Speed - 300km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/...(choose a part on the right to read more)
General Fitment 911 2009-12
From $7,731.90
Make a selection
Brombacher 997 tt (TUV version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque (with FVD software)**
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purchased seperately. They are "quad" 3.5" (90/100mm) tips and ar...(choose a part on the right to read more)
General Fitment 911 2005-08
$5,230.50
Make a selection
B&b started from scratch to offer a complete high performance exhaust system for the Porsche 911. Extensive dyno testing on their in-house dynamometer afforded us impressive horsepower and torque gains throughout the entire power band. Headers and muffler are meticulously built by hand using t304 stainless steel for a lifetime of performance - guaranteed! Included in the kit is the header set, 1.625" or 1.75" primary tube diameter, with or without heat exchangers. Their proprietary twin inlet muffler built specifically for your street or race application is also included in this complete exhaust system. The kit for the naturally aspirated Porsche 911 includes all necessary hardware, gaskets and accessroies ne...(choose a part on the right to read more)
General Fitment 911 1984-86 911 1974-77
$4,072.72
Make a selection
"brombacher" (sound version) stainless steel mufflers
(3.6l model need end tips from 3.8l model, FVD 111 997 01 or FVD 111 997 03, larger pipe implementing equal more power).
Facts (based on 997s):
- + 10 crank hp & + 10 crank torque
- 2 1/2? (63.5 mm) diameter tubing (reduces thermal stress)
- weighs 33 lbs. (15,0 kg)
- t 316 stainless steel for improved durability over t 304
- factory stamped for true Porsche sound
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary
The export sound version of our "brombacher" sport mufflers gives the 997 a more pronounced, aggressive sound compared to factory mufflers. These end-muffl...(choose a part on the right to read more)
General Fitment 911 2005-08
$1,786.40
Make a selection
+140 crank hp & +155 crank tq gain on the turbo and +100 crank hp & +126 crank tq gain on the turbo s. All while offering ultra-smooth drivability and reliability that you expect from your Porsche. Package includes: - FVD my genius handheld flash tool (included). - FVD tuning software FVD99161840mg. - bmc sport filter 47079801. - FVD sound version muffler (reuses factory catalytic converters) bes99105040s. - FVD headers bes99101040s. - FVD exhaust installation kit (everything needed for simple installation). FVD software power gains: max. Power - 485 kw (660 hp) @ 6500rpm max. Torque - 870 nm (642 lb.-ft.) @ 3750rpm max. Speed - 330km/h (206 mph) max. Rpm - 7200 rpm acceleration 0-100 km/h (0-62.5 mph) - 2.9s g...(choose a part on the right to read more)
$6,378.90
Make a selection
+140 crank hp & +155 crank tq gain on the turbo and +100 crank hp & +126 crank tq gain on the turbo s. All while offering ultra-smooth drivability and reliability that you expect from your Porsche. Package includes: - FVD my genius handheld flash tool (included). - FVD tuning software FVD99161840mg. - bmc sport filter 47079801. - FVD sound version valved muffler with 200 cell hjs tri-metallic cats bes99120240skhd. - valve control module with remote control beskls001001. - FVD headers bes99101040s. - FVD exhaust installation kit (everything needed for simple installation). FVD software power gains: max. Power - 485 kw (660 hp) @ 6500rpm max. Torque - 870 nm (642 lb.-ft.) @ 3750rpm max. Speed - 330km/h (206 mph) ...(choose a part on the right to read more)
$14,145.77
Make a selection
Kit includes:
Software fast load, sport air filter, sportmuffler, k24/26 turbocharger l/r, 5.0bar fuel-pressure-regulator, air-powerflow kit, headers, 3.8l p/c, sport camshafts
Genuine:
Engine - 6cyl. Boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,4:1
Max. Power - 309kw (415hp) @ 6000rpm
Max. Torque - 560nm (413lbf ft) @ 3500-4500rpm
Max. Speed - 305km/h
Max. Rpm - 6750rpm
Acceleration 0-100km/h - 4.2s
Tuning:
Max. Power - 449kw (610hp) @ 6750rpm
Max. Torque - 830nm(612lbf ft) @ 4500rpm
Max. Speed - 339km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.3s
For 20 years, FVD-Brombacherhas been setting the standard for Porsche tuning. FVD-Brombacherhas perfected the art of p...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$43,366.71
Make a selection
Kit includes:
Software fast load, power-flow kit, header system, TUV "oe look" sportmufflers
Genuine:
Engine - 6 cylinder boxer
Capacity - 3596ccm
Compression ratio - 11,3:1
Max. Power - 235kw (320hp) @ 6800rpm
Max. Torque - 370nm (273lbf ft) @ 4250rpm
Max. Speed - 285km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 5.0s
Tuning:
Max. Power - 250kw (340hp) @ 7000rpm
Max. Torque - 400nm (295lbf ft) @ 4500rpm
Max. Speed - 295km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 4.7s
For 20 years, FVD-Brombacherhas been setting the standard for Porsche tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in horsepower and torque, all while retaining the driv...(choose a part on the right to read more)
General Fitment 911 1998-05
$7,961.80
Make a selection
Kit includes:
Software fast load, sport air filter, sportmuffler with 200 cell catalytics.
Genuine:
Engine - 6cyl. Boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,4:1
Max. Power - 309kw (415hp) @ 6000rpm
Max. Torque - 560nm (413lbf ft) @ 3500-4500rpm
Max. Speed - 305km/h
Max. Rpm - 6750rpm
Acceleration 0-100km/h - 4.2s
Tuning:
Max. Power - 375kw (510hp) @ 6000rpm
Max. Torque - 745nm (550lbf ft) @ 4500rpm
Max. Speed - 328km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.8s
For 20 years, FVD-Brombacherhas been setting the standard for Porsche tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in horsepower and torque, all while retainin...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$7,549.92
Make a selection
Kit includes:
Software fast load, sport air filter, sportmuffler, k24/26 turbocharger l/r, 5.0bar fuel-pressure-regulator, air-powerflow kit
Genuine:
Engine - 6cyl. Boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,4:1
Max. Power - 309kw (415hp) @ 6000rpm
Max. Torque - 560nm (413lbf ft) @ 3500-4500rpm
Max. Speed - 305km/h
Max. Rpm - 6750rpm
Acceleration 0-100km/h - 4.2s
Tuning:
Max. Power - 423kw (575hp) @ 6500rpm
Max. Torque - 780nm @ 4500rpm
Max. Speed - 335km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.4s
For 20 years, FVD-Brombacherhas been setting the standard for Porsche tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in horse...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$21,572.22
Make a selection
Free flow exhaust kits for the 911 2.7 l and 3.0 l models from 1976-83, improve sound and performance, while reducing backpressure and thermal load on the motor. These kits are based off the early style exhausts found on the 1974 2.7 l rs. They had a straight through, superior, free flow exhaust design that included a dual inlet muffler.
Our FVD free flow kits contain a variety of dansk exhaust products, stainless steel industries (ssi) exhaust products, bursch exhaust products, Porsche genuine parts and original equipment manufacturer (oem) parts.
FVD BrombacherGermany conveniently combines these quality products, to offer the widest range of sound levels and performance. Sound levels range from mild, m...(choose a part on the right to read more)
General Fitment 911 1970-73 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89
$3,845.16
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|