PORSCHE 356 B GASKET KITS
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
We recommend replacing your exhaust gaskets each time you remove your exhaust. If you reuse an old gasket, odds are it will leak and create noise or fill the cabin with noxious fumes. Sold individually. 1 necessary per car. Simplify your exhaust installation with one of our pre-packaged installation kits. Find them under exhaust -> gaskets / installation kits
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
View/Change Diagram
From $5.41
Make a selection
This is the new-style water pump found on 87+ 944 models. Since the older version is no longer made, this pump is the replacement/upgrade on '82-86 944 and 924s models. When upgrading on an older model, the adapter kit (r944106021kt) and block-off plate kit (r951106021kt) are required. Gasket (r94410613204) sold separately.
View/Change Diagram
From $232.33
Make a selection
Brombacher racing exhaust system for 997gt3/rs
Facts:
- + 25 crank hp & + 25 crank torque
- bypass-catalytics
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 42 lbs. (19 kg)
- 44.5 lb (20 kg) saving?s over stock system!
- t 316 stainless steel for improved durability over t 304
- reuse?s factory center muffler for backpressure and resonance dampening.
- includes all necessary clamps and mounting brakets
- made in Germany
- 106 db
- intoxicating growl at idle, partial throttle and wide open throttle
- reuse?s factory tips or larger aftermarket tips
- dme programming necessary 2nd gen
The FVD...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $3,177.67
Make a selection
This is a repair kit for original part # 930 606 013 02 and superseded # 993 606 013 00. Kit includes: 1 qty. Plug socket 2 qty. Connectors 2 qty. Gaskets 1 qty. Stopper sold as a kit. 1 necessary per car.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
Crankcase / intermediate shaft cover seal. Sold individually. Did you know that we have complete engine service kits and complete gasket sets to make your next service a breeze? Find them under the spare parts tab, engine, then maintenance kits or gasket sets.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
View/Change Diagram
From $2.10
Make a selection
This kit consists of all the proper hardware to install heat exchangers and a muffler, including the rare copper locking nuts to ensure a perfect installation. Remember to install the exchangers one at a time and torque in an x pattern to 18 ft lbs.
Note: before ordering any 914 exhaust component, make sure you check the style of heat exchangers to determine the correct system for your car. Since all four cylinder exchangers/mufflers fit all 914s, you may not have the same muffler and components originally fitted to your car. It is advised to match an exhaust system and gasket kit to the style of heat exchangers and not the year of car or engine.
- 1970-73 1.7/1.8l models have heat exchangers that turn up...(choose a part on the right to read more)
General Fitment 914 1970-76
FVD "brombacher" sound version exhaust system for 964 89-94
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 66 lbs. (29,9 kg)
- t 316 stainless steel for improved durability over t 304
- 1 x 3.5"(90mm) oval tip
- includes flexible heating tube
- made in Germany
- no dme programming necessary. No check engine light.
- intoxicating growl at idle, partial throttle and wide open throttle.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled qualit...(choose a part on the right to read more)
General Fitment 911 1989-94
$8,518.40
Make a selection
Improving upon designs, r&d, and delivering a quality product to the market is what agency power has continually done. Developing yet another high quality product for the Porsche vehicle, agency power has released their Porsche 996/997 performance header kit. These headers are 321stainless steel. Each headers is fully polished with amazing robotic welds. The headers have very strong and precision cut 1/4 inch flanges. The agency power headers mount and fit to the factory cat pipes or aftermarket ones.
Agency power designed the headers to change the sound of the Porsche, increase air flow, and improve horsepower. During dyno testing, the headers made almost 5 wheel horsepower. On a normally aspirated 996 or 9...(choose a part on the right to read more)
General Fitment 911 GT3 2003-05 911 1998-05 911 2005-08
$1,250.95
Make a selection
FVD "brombacher" sound version exhaust system for 964 89-94
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 66 lbs. (29,9 kg)
- t 316 stainless steel for improved durability over t 304
- 2 x 3.5"(90mm) oval tips
- includes flexible heating tube
- made in Germany
- no dme programming necessary. No check engine light.
- intoxicating growl at idle, partial throttle and wide open throttle.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quali...(choose a part on the right to read more)
General Fitment 911 1989-94
$8,089.40
Make a selection
Brombacher 986/s (TUV) stainless steel sport muffler
Facts:
- + 8 crank hp & + 10 crank torque
- 2 1/4" tubing (55 mm) straight through design for max. Power
- weighs 23 lbs. (10,4 kg)
- t 316 stainless steel for improved durability over t 304
- dual 3.5"(90mm) round tips
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle while remaining within the db limits of the TUV.
- no dme programming necessary.
- ask for the mounting kit FVD mk 986 001wich includes all gaskets and clambs.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparall...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$2,068.00
Make a selection
Brombacher racing exhaust system for 997gt3/rs with 90mm x 2 round tips
Facts:
- + 25 crank hp & + 25 crank torque
- catalytic bypass
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 42 lbs. (23 kg)
- 44.5 lb (19 kg) savings over stock system!
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brakets
- made in Germany
- 108 db
- intoxicating growl at idle, partial throttle and wide open throttle
- dme programming necessary.
The FVD GT3 race exhaust gives the 997 GT3 a more pronounced, aggressive sound similar to the 997 cup car. Our exhaust ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $4,331.80
Make a selection
"brombacher" 996 GT2 titanium exhaust system with 200 cells titanium tri-metal catalytics.
Facts:
- + 25 crank hp & + 19 crank torque
- 100-105 db sound level
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9 kg)
- 2 x 3.5"(90mm) titanium tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 60...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$9,835.10
Make a selection
Brombacher racing exhaust system for 997gt3/rs with 90mm x 2 round tips
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 42 lbs. (23 kg)
- 44.5 lb (19 kg) savings over stock system!
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brakets
- made in Germany
- 108 db
- intoxicating growl at idle, partial throttle and wide open throttle
- dme programming necessary on 997.2 GT3
The FVD GT3 race exhaust gives the 997 GT3 a more pronounced, aggre...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $6,698.73
Make a selection
"brombacher" exhaust system for 997 GT3/rs (sound version) with rsr style tips
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 71 lbs. (32,2 kg)
- 15.5 lb (7 kg) weight savings over stock
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- 2 x 2 3/4" (70mm) angle cut rsr center exit tips
- made in Germany
- 98 db (98db at idle and partial throttle, builds to 100db at wot)
- intoxicating growl at idle, partial throttle and wide open ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$8,507.40
Make a selection
Brombacher race exhaust system with valves for 997 GT3/rs with rsr style tips
Facts:
- + 25 crank hp & + 18 crank torque with valves closed
- 200 cell high flow, tri metal German hjs "hd" sport catalysts**
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 37.2 lbs. (16.9 kg) this is the lightest valved system in the Brombacherline !**
- 49.3 lb (22.3 kg) savings over stock system!**
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- made in Germany
- 110 db with valves open (not for faint of heart!)
- 103 db with valves closed
- into...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$6,106.10
Make a selection
FVD cylinder head gasket sets contain high quality German sourced gaskets, seals and o-rings. This kit contains a complete set of gaskets to make a teardown / rebuild more convenient. Sold as a complete set. 1 necessary per car. To complete the gasket set for the whole engine order please 91110090705eq too. Only for engines 911.92/93/97/98
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
Installation made easy! Replace worn hardware and gaskets with one of our prepackaged installation kits.
Fits: turbo 3.6 (93-94), turbo 3.3 (91-92), cup-race (90-93), turbo-look (91-94), rsr (92-92), rs (92-92), c4 (89-94), c2 (90-94)
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1989-94
- + 25 crank hp & + 27 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts. Cats are located behind the muffler for even greater hp & torque.
- equal length header set up with merge collector for maximum torque gain
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 64.3 lbs. (29,2 kg)
- t 316 stainless steel for improved durability over t 304
- 2 x 3"(90mm) round tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- 105.7 db
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
Weight savings:
997 GT3 OEM exhaust weight:
Stock primary ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$8,549.20
Make a selection
"brombacher" (sound version) stainless steel mufflers
(3.6l model need end tips from 3.8l model, FVD 111 997 01 or FVD 111 997 03, larger pipe implementing equal more power).
Facts (based on 997s):
- + 10 crank hp & + 10 crank torque
- 2 1/2? (63.5 mm) diameter tubing (reduces thermal stress)
- weighs 33 lbs. (15,0 kg)
- t 316 stainless steel for improved durability over t 304
- factory stamped for true Porsche sound
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary
The export sound version of our "brombacher" sport mufflers gives the 997 a more pronounced, aggressive sound compared to factory mufflers. These end-muffl...(choose a part on the right to read more)
General Fitment 911 2005-08
$1,786.40
Make a selection
"brombacher" exhaust system for 997.2 GT3/rs with valves for the best of both worlds.
facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- valved system with sound switch for quiet sound and export sound for the track.
- equal length header set up with merge collector for maximum torque gain
- weighs 71 lbs. (32,2 kg)
- 15.5 lb (7 kg) weight savings over stock
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- 2 x 90mm center exit tips
- made in Germany
- intoxicating growl at idle, partial throttle and wide open t...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $8,880.30
Make a selection
"brombacher" stainless steel exhaust system for the 997-2
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- weighs 72 lbs.(33,0 kg).
the stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg).
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 4400rpm
Max. Speed - 300km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/...(choose a part on the right to read more)
General Fitment 911 2009-12
From $7,994.80
Make a selection
Installation made easy! Replace worn hardware and gaskets with one of our prepackaged installation kits.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment CAYENNE 2007-10 CAYENNE 2003-06
Brombacher 997 tt (super sound version) stainless steel exhaust system
Facts:
- + 35 crank hp & + 25 crank torque (if pressure sensor is adjusted via software)**
- catalytic bypass
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purcha...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12 911 TURBO/GT2 2007-09
$2,117.50
Make a selection
Brombacher 997 tt (sound version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque (with FVD software) **
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- 98db at idle and partial rpms, 100 db at wide open throttle
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
Please note:
Exhaust tips ar...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12
$4,969.80
Make a selection
Em-47-7347 dual 40 type 2/4 kit w/ cleaners
This is the EMPI hpmx 40 idf dual carb kit for 1700 cc and larger engines. This kit also comes with complete instructions on installation on the 914 engine. This kit comes with a proven hex bar linkage with aircraft heim joints. Includes aluminum manifolds and all necessary hardware and gaskets. This kit comes with washable air cleaners, and chrome steel base and cover plate. These carbs come to us now tuned with a stamped identification. When switching from fuel injection to carburetors, each kits require a lower-pressure fuel pump (part number r90160810600) and a different distributor (part number r0231178009)
General Fitment 914 1970-76
$1,080.00
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|