PORSCHE 911 CABIN
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
"brombacher" stainless steel exhaust system for the 997-2
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- weighs 72 lbs.(33,0 kg).
the stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg).
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 4400rpm
Max. Speed - 300km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/...(choose a part on the right to read more)
General Fitment 911 2009-12
From $7,994.80
Make a selection
"brombacher" stainless steel exhaust system with valves for the 997-2
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- weighs 72 lbs.(33,0 kg).
- includes valves for stock sound and a true GT3 cup like race sound!
The stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg).
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12
$9,992.40
Make a selection
"brombacher" exhaust system for 997 GT3/rs
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up for maximum torque gain
- weighs 71 lbs. (32,2 kg),
- 15.5 lb (7 kg) weight savings over stock
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- 2 x 3.5"(90mm) round center exit tips
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$8,507.40
Make a selection
Brombacher (sound version) stainless steel mufflers
Facts (based on 997s):
- + 5 crank hp & + 2 crank torque
- 2 1/2 (63.5 mm) diameter tubing (reduces thermal stress)
- weighs 33 lbs. (15,0 kg)
- t 316 stainless steel for improved durability over t 304
- factory stamped for true Porsche sound
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- reuses factory tips or any aftermarket tip designed to fit OEM exhaust. (3.6l mod. Need 3.8l tips)
- no dme programming necessary
Figures (based on 997s):
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 440...(choose a part on the right to read more)
General Fitment 911 2009-12
$2,581.70
Make a selection
Brombacher 997 tt (super sound version) stainless steel exhaust system
Facts:
- + 35 crank hp & + 25 crank torque (if pressure sensor is adjusted via software)**
- catalytic bypass
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purcha...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12 911 TURBO/GT2 2007-09
$2,117.50
Make a selection
Direct bolt-on replacement for the factory air box providing increased airflow and power. Made from anodized gold t6061 aluminum. The gold color mimics the yellow zinc plated OEM hardware that Porsche used in all their air-cooled cars from this era.
The design of this airbox cover was inspired by factory Porsche cup cars. After much on-track testing done by fabspeed’s owner on his 993 rsr, he found that using this open filter design netted the best power results, with more flow and cool intake temps.
Sound:
The factory Carrera airbox is designed to muffle the induction note of the engine to keep it out of the cabin. This airbox lets all that glorious air cooled flat six induction growl into the cabi...(choose a part on the right to read more)
General Fitment 911 1989-94
From $196.43
Make a selection
Brombacher 997 tt (TUV version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque (with FVD software)**
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purchased seperately. They are "quad" 3.5" (90/100mm) tips and ar...(choose a part on the right to read more)
General Fitment 911 2005-08
$5,230.50
Make a selection
Brombacher 997 tt (sound version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque (with FVD software) **
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- 98db at idle and partial rpms, 100 db at wide open throttle
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
Please note:
Exhaust tips ar...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12
$4,969.80
Make a selection
"brombacher" titanium exhausts are the absolute last word in exhausts for the 997 GT2-rs.
Incredible performance and aggressive sound all in a lightweight titanium system. The system as shown increases performance 25hp and weighs just 25.5 lbs for a huge weight savings in the already heavy rear of the 911.
From the turbo flanges and catalytics (available in 100 or 200 cells), to the tailpipes (Ø 2x85mm), this entire exhaust system (excluding the cells themselves) is made entirely of titanium. The 4 chamber system design reduces the drone in the cabin while retaining a deep, throaty growl unlike other 2 chamber systems from the competition. Our system is designed using the most expensive and highest he...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $10,703.00
Make a selection
Brombacher edition valved mufflers are the perfect compromise for you and your loved ones. Rich, deep race car tones with the valves open and soft subtle, completely stock sounds with them closed.
- + 15 crank hp & + 14 crank torque
- 2 ½? (63.5 mm) diameter tubing (reduces thermal stress)
- 22 lbs. (10 kg) weight savings
- replaces OEM valved Porsche® sport exhaust (pse).
- reuses OEM headers and 600 cell cats (no cel, retains OEM software)
- intoxicating growl at idle, partial throttle and wide open throttle with the valves open. Factory quiet with them closed!
- no dme programming necessary
- includes quad 3.5 ? Tips.
- made in Germany
In our relentless quest to meet all of our customers...(choose a part on the right to read more)
General Fitment 911 2009-12
From $3,174.70
Make a selection
This item is in stock and ready to ship!
The gruppem ram air intake system was created to improve efficiency by reducing the restrictions of a stock intake. A factory intake system is designed to minimize cost and reduce noise within the cabin, but these tradeoffs also sacrifice performance. To increase efficiency and power, gruppem has worked to reduce restriction and decrease the intake air temperature. Colder air is denser allowing the intake system to move a larger volume of air and in turn make more power. The shape of the duct and filter are designed specifically to increase the velocity of the air and increase the pressure, while at the same time fitting within engine bays cramped space. Carbon f...(choose a part on the right to read more)
General Fitment 911 GT3 2003-05 911 GT3 2007-11
$3,365.42
Make a selection
This item is in stock and ready to ship!
The gruppem ram air intake system was created to improve efficiency by reducing the restrictions of a stock intake. A factory intake system is designed to minimize cost and reduce noise within the cabin, but these tradeoffs also sacrifice performance. To increase efficiency and power, gruppem has worked to reduce restriction and decrease the intake air temperature. Colder air is denser allowing the intake system to move a larger volume of air and in turn make more power. The shape of the duct and filter are designed specifically to increase the velocity of the air and increase the pressure, while at the same time fitting within engine bays cramped space. Carbon f...(choose a part on the right to read more)
General Fitment 911 1998-05
$3,365.42
Make a selection
Product details:
Replaces blower motor assembly and ductwork while allowing plenty of heat; replicated from factory rs part
Features:
-fits all 964 Carrera vehicles (1989-1994)
-saves 8 lbs from rear of vehicle
-replica of the Porsche rs lightweight factory heat duct
-factory Porsche part is roto-formed plastic with parting lines where as the fabspeed rs heater pipe is genuine carbon fiber.
-replaces blower motor assembly/ductwork and still allows heat in the cabin.
-improves aesthetic value with clear coated carbon fiber tube.
-easy 20 minute diy install
-all fabspeed performance products are backed by the fabspeed lifetime limited warra...(choose a part on the right to read more)
General Fitment 911 1989-94
Gruppe m ram air intake system Porsche 964 Carrera 88-93
The gruppem ram air intake system was created to improve efficiency by reducing the restrictions of a stock intake. A factory intake system is designed to minimize cost and reduce noise within the cabin, but these tradeoffs also sacrifice performance. To increase efficiency and power, gruppem has worked to reduce restriction and decrease the intake air temperature. Colder air is denser allowing the intake system to move a larger volume of air and in turn make more power. The shape of the duct and filter are designed specifically to increase the velocity of the air and increase the pressure, while at the same time fitting within engine bays cramped ...(choose a part on the right to read more)
General Fitment 911 1987-89
$2,175.08
Make a selection
Gruppe m ram air intake system Porsche 997 Carrera incl. 4s 05-09
The gruppem ram air intake system was created to improve efficiency by reducing the restrictions of a stock intake. A factory intake system is designed to minimize cost and reduce noise within the cabin, but these tradeoffs also sacrifice performance. To increase efficiency and power, gruppem has worked to reduce restriction and decrease the intake air temperature. Colder air is denser allowing the intake system to move a larger volume of air and in turn make more power. The shape of the duct and filter are designed specifically to increase the velocity of the air and increase the pressure, while at the same time fitting within engine bays...(choose a part on the right to read more)
General Fitment 911 2005-08
$4,045.05
Make a selection
Product details:
Full exhaust system developed for track use provides an aggressive exhaust note while adding horsepower, torque, and throttle response; available as single or dual outlet and with or without heat exchange.
Features:
-fits all Porsche 993 Carrera vehicles (1994-1998)
-loud and aggressive cup car sound. Recommended for track use only.
-this system can be ordered in single- or double- outlet form; cap is provided for single-outlet use. Please specify.
-maintain your factory in-cabin heat with the optional heat exchange on the headers. Please specify.
-saves 43 from the rear of the vehicle when configured with heat option and saves 47 when config...(choose a part on the right to read more)
General Fitment 911 1994-98
From $2,795.00
Make a selection
FVD "brombacher" level 2 "super sound" tuning kit for the 2009- 997s includes includes our FVD flashload software cable, a single user diagnostic tool with software, bmc sport air filter, "sound version" sport mufflers and primary muffler bypass.
"sound version" sport muffler facts (based on 997s):
- + 5 crank hp & + 2 crank torque
- 2 1/2" (63.5 mm) diameter tubing (reduces thermal stress)
- weighs 33 lbs. (15,0 kg)
- t 316 stainless steel for improved durability over t 304
- factory stamped for a more pronounced Porsche sound
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- reuses factory tips or any aftermarket tip designed to fit OEM exhaust.
...(choose a part on the right to read more)
General Fitment 911 2009-12
$4,574.90
Make a selection
FVD "brombacher" level 3 tuning kit for the 2009- 997s includes our FVD flashload software cable, a single user diagnostic tool with software, bmc sport air filter and our "brombacher" stainless steel exhaust system for the 997s-2 dfi.
"brombacher" exhaust system facts (based on 997s):
- + 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
- 12lbs (5 kg) weight savings
Stock:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:...(choose a part on the right to read more)
General Fitment 911 2009-12
$10,371.90
Make a selection
FVD "brombacher" level 3 tuning kit for the 2009- 997s includes our FVD flashload software cable, a single user diagnostic tool with software, bmc sport air filter and our "brombacher" stainless steel TUV exhaust system for the 997s-2 dfi.
"brombacher" exhaust system facts (based on 997s):
- + 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
- 12lbs (5 kg) weight savings
Stock:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 1...(choose a part on the right to read more)
General Fitment 911 2009-12
$9,711.90
Make a selection
FVD "brombacher" sound version exhaust system for 964 89-94
- + 25 crank hp & + 19 crank torque
- catbypass without heating
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 66 lbs. (29,9 kg)
- t 316 stainless steel for improved durability over t 304
- 2 x 3.5"(90mm) oval tips
- includes flexible heating tube
- made in Germany
- no dme programming necessary. No check engine light.
- intoxicating growl at idle, partial throttle and wide open throttle.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche® owner and offer unmatched performance, unparalleled quality, and incredible value. All...(choose a part on the right to read more)
General Fitment 911 1989-94
From $5,810.20
Make a selection
FVD "brombacher" sound version exhaust system for 964 89-94
- + 25 crank hp & + 19 crank torque
- 100 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 66 lbs. (29,9 kg)
- t 316 stainless steel for improved durability over t 304
- 2 x 3.5"(90mm) oval tips
- includes flexible heating tube
- made in Germany
- no dme programming necessary. No check engine light.
- intoxicating growl at idle, partial throttle and wide open throttle.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche® owner and offer unmatched performance, unparalleled qua...(choose a part on the right to read more)
General Fitment 911 1989-94
From $7,496.50
Make a selection
+ 25 crank hp & +23 crank torque (on average). - 2.5 tubing (63.5 mm) without catalytic converters - weighs 28 kg (61 lbs.) which is an 11 kg (24 lb. Weight savings) over the factory system. - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - 3.5" (90 mm) dual oval, double walled polished tips included. - intoxicating growl at idle, partial throttle and wide open throttle. - made in Germany. Please note: this is a bespoke exhaust system. It can be custom designed and the tubing diameters can be adjusted for your cars individual performance. Please provide your FVD parts specialist with detailed information on your current horsepower and torque, if you are running larger displacement,...(choose a part on the right to read more)
General Fitment 911 1994-98
From $5,926.80
Make a selection
This heat exchanger is engineered for the discerning Porsche 911 owner. Ssi heat exchangers are made from superior t 304 grade (18% cr, 8%+ ni) stainless steel. Ssi has become an industry standard for Porsche 911 heat exchangers due to the exceptional materials, craftsmanship and durability. This is critical when considering heat exchangers, as exhaust leaks caused by poor materials can lead to carbon monoxide entering the cabin via the heating system. Features: gains of +10-15 hp and +10-20 tq t304 stainless steel (18% cr, 8%+ ni) increased pipe diameter for backpressure reduction connects to "early style" dual inlet mufflers bolt on replacements reduces the thermal load on the motor includes custom torque w...(choose a part on the right to read more)
$2,864.40
Make a selection
This heat exchanger is engineered for the discerning Porsche 911 owner. Ssi heat exchangers are made from superior t 304 grade (18% cr, 8%+ ni) stainless steel. Ssi has become an industry standard for Porsche 911 heat exchangers due to the exceptional materials, craftsmanship and durability. This is critical when considering heat exchangers, as exhaust leaks caused by poor materials can lead to carbon monoxide entering the cabin via the heating system. Features: t304 stainless steel (18% cr, 8%+ ni) backpressure reduction bolt on replacement reduces the thermal load on the motor sold individually. 1 necessary per car.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once orde...(choose a part on the right to read more)
This heat exchanger kit is engineered for the discerning Porsche 911 3.2 l owner. Ssi heat exchangers are made from superior t 304 grade (18% cr, 8%+ ni) stainless steel. Ssi has become an industry standard for Porsche 911 heat exchangers due to the exceptional materials, craftsmanship and durability. This is critical when considering heat exchangers, as exhaust leaks caused by poor materials can lead to carbon monoxide entering the cabin via the heating system. Features: gains of +10-15 hp and +10-20 tq t304 stainless steel (18% cr, 8%+ ni) 1.5" pipe diameter for backpressure reduction 21.5 mm thick flange with "fire ring" includes o2 sensor socket connects "early style" dual inlet mufflers bolt on replac...(choose a part on the right to read more)
$2,961.20
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|