PORSCHE 997 TURBO ORDER FORM
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Sport catalytic 100 cell pipes for use with our Brombacherexhaust system. This setup offers the ultimate in performance and sound for your turbo.
Gain of 21 hp and 18 lb/ft of torque
70 mm diameter tubing throughout
Please note- ecu programming will be necessary in order to avoid a check engine light.
General Fitment 911 TURBO/GT2 2007-09
$2,933.13
Make a selection
Kit includes:
Software dme, power-flow kit, sport header system, sportmuffler.
Please note: this dme cannot be flashloaded. Dme must be sent to us.
Some models require oxygen sensor relocation.
Genuine:
Engine - 6 cylinder boxer
Capacity - 2480ccm
Compression ratio - 11,0:1
Max. Power - 150kw (204hp) @ 6000rpm
Max. Torque - 245nm (181lbf ft) @ 4500rpm
Max. Speed - 240km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 6.9s
Tuning:
Max. Power - 169kw (230hp) @ 6000rpm
Max. Torque - 280nm (207lbf ft) @ 5500rpm
Max. Speed - 255km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 6.4s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. ...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$4,261.40
Make a selection
The ultimate stainless steel system for the street. Completely civilized while cruising and opens at higher rpms. Quieter than the street / clubsport versions. More low and mid-range torque. Larger primaries, larger collector, largest diameter tubing on the market. Made for mid-range and top end performance with the added beauty of 3.5" (90mm) dual exhaust tips! + 25 crank hp & +24 crank torque (on average). - 2.9 tubing (75 mm) at the widest point. Primaries are 2.5" (64mm). - 200 cell hjs "hf" trimetallic catalytic converters. - t 316 lightweight stainless steel for improved durability over t 304. - 3.5" (90 mm) dual oval, double walled polished tips included. - intoxicating growl at idle, partial thrott...(choose a part on the right to read more)
General Fitment 911 1994-98
From $10,723.61
Make a selection
The perfect compromise for you and your loved ones. Rich, deep race car tones with the valves open and soft subtle, completely stock sounds with them closed. Torque is better than our other systems in the low range with the valves closed and horsepower is better with the valves open. Made for mid-range and top end performance with the added beauty of 3.5" (90mm) dual exhaust tips! + 27 crank hp & +25 crank torque (on average). - 2.9 tubing (75 mm) at the widest point. Primaries are 2.5" (64mm). - 200 cell hjs "hf" trimetallic catalytic converters. - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - 3.5" (90 mm) dual oval, double walled polished tips included. - dual high quality ...(choose a part on the right to read more)
General Fitment 911 1994-98
From $11,730.62
Make a selection
Sport catalytic 100 cell pipes for use with our Brombacherexhaust system. This setup offers the ultimate in performance and sound for your turbo.
Gain of 21 hp and 18 lb/ft of torque
70 mm diameter tubing throughout
Please note- ecu programming will be necessary in order to avoid a check engine light.
General Fitment 911 TURBO/GT2 2007-09
$2,932.72
Make a selection
Stainless steel outlet tips replace the factory outlets for a sportier look and finish; available in polished and black chrome finishes
Features:
Fits all Porsche 997.2 turbo vehicles (2010-2012)
Available in polished or black chrome finish - specify choice when ordering
Constructed from high quality 14-16 gauge, c.n.c. Mandrel bent t304l stainless steel
Simple diy installation with no cutting or welding required
All fabspeed performance products are backed by the fabspeed lifetime limited warranty
General Fitment 911 TURBO/GT2 2010-13
With the success of our ypipe kit on the 996tt and 997tt, we did a hybrid and built this new part to work with the OEM intake on the 997.2 turbo. Airflow restrictions can always hamper performance and power and this part like any other does that as well. Our ypipe kit has smooth mandrel 3inch bends from a 4inch collector that goes to the throttlebody. For fitment reasons, we then neck down to 2.25inches to fit on the stock boost hoses. We have incorporated all fittings/sensors that are required.
Going off our original baseline using our mustang awd on 91octane and about 90f temp, the car made 455awhp and 443ft/lbs of torque. We did these test in standard mode, not sport to see the linear gains. With the addi...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2010-13
$1,199.95
Make a selection
The differences are day… and night! Gauge faces are one of the most visible and frequently looked at components in your Porsche. Why skimp on quality? Gauge faces should have clearly visible markings and be easy to read with and without back lighting. Replacement faces should offer similar qualities, but many gauge faces on the market don't quite make the grade. FVD gauge faces are different. What makes them different you ask? See for yourself. In the below pictures you will see that the tiptronic is an FVD gauge face and the 6 speed gauge face is the competitions. The daytime difference (the competition): darker, more yellow appearance raised orange warning lights, not flush larger, bolder script than t...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04 911 1998-05 911 TURBO/GT2 2001-05
The differences are day? And night!
Gauge faces are one of the most visible and frequently looked at components in your Porsche. Why skimp on quality? Gauge faces should have clearly visible markings and be easy to read with and without back lighting. Replacement faces should offer similar qualities, but many gauge faces on the market don?t quite make the grade. FVD gauge faces are different. What makes them different you ask? See for yourself.
In the below pictures you will see that the tiptronic is an FVD gauge face and the 6 speed gauge face is the competitions.
The daytime difference (the competition):
Darker, more yellow appearance
Raised orange warning lights, not flush
Larger, bolder script...(choose a part on the right to read more)
General Fitment PANAMERA 2010-14 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2009-12 911 2005-08 CAYMAN 2009-12 CAYMAN 2006-08 BOXSTER 2009-11 BOXSTER 2005-08
Superb sports car sound; available with either sport or mild exhaust tones. Oem tips can be reused or dual-style tips available in polished or black chrome; please indicate color choice when ordering.
Features:
Fits all Porsche 997 turbo vehicles (2006-2009)
Increases horsepower and torque by 26 whp and 31 ft-lbs
Saves weight from the rear of the vehicle
Includes 200-cell hjs sport catalytic converters
Constructed from high-quality 14-16 gauge c.n.c. Mandrel-bent t304l stainless steel for optimum flow and maximum durability
Direct bolt on installation for factory muffler system
All...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $4,195.95
Make a selection
By ordering this part number you get after previous sending in
Your wishbone overhauled with new race-silent blocs back.
The race-sílent blocs (85 shore) give you more stable driving.
Should it not be repairable, we will inform you immediately.
Fits: GT2 (96-98), turbo (95-98), c4s (96-98), c4 (95-98), c2s (96-98), c2 (94-98)
General Fitment 911 1994-98
Very aggressive "straight-pipe" system which replaces/bypasses the factory muffler
Features:
Fits all Porsche 997 turbo vehicles (2006-2009)
Includes 200-cell hjs sport cats for maximum flow and performance
Saves 45 lbs from the rear of the vehicle
Available with polished or black chrome deluxe quad style tips - please specify color choice when ordering
Constructed from high-quality 14-16 gauge c.n.c. Mandrel-bent t304l stainless steel for optimum flow and maximum durability
Direct replacement for factory mufflers
All fabspeed performance products are backed by the fabspeed ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$2,795.00
Make a selection
Bolt-on replacement outlet tips for factory and aftermarket exhaust systems
Features:
Fits all Porsche 997 turbo vehicles (2006-2009)
Available in polished of black chrome finishes - please specify finish when ordering
Constructed from high-quality 14-16 gauge t304 stainless steel
Simple diy installation
All fabspeed performance products are backed by the fabspeed lifetime limited warranty
General Fitment 911 TURBO/GT2 2007-09
Say good bye to that 993 hydraulic lifter flat spot in the higher rpm's with our mechanical rocker arm kit. This is a complete retrofit kit ready for installation. We also suggest our sprocket wheels kit FVD10550000 , in order to more accurately time the camshafts. Please note that it will fit only with sport camshaft for mechanical rocker arms and not with the original 993 camshafts. Complete kit consists of: 12 qty. Adjusting screws 12 qty. Hexagon nuts m8x1 mm 12 qty. Rocker arms 12 qty. Rocker arm shafts kit weighs 6.2 lbs. (2.8 kg) professional installation is required. Different manufacturing tolerances require an inspection of the free clearance of all parts!
This item may need to be sourced from ger...(choose a part on the right to read more)
General Fitment 911 1994-98
From $2,528.90
Make a selection
Genuine:
Engine - 6 cylinder boxer
Capacity - 2480ccm
Compression ratio - 11,0:1
Max. Power - 150kw (204hp) @ 6000rpm
Max. Torque - 245nm (181lbf ft) @ 4500rpm
Max. Speed - 240km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 6.9s
Tuning:
Max. Power - 158kw (215hp) @ 6000rpm
Max. Torque - 260nm (192lbf ft) @ 4500rpm
Max. Speed - 247km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 6.7s
Please note: this dme cannot be flashloaded. Dme must be sent to us.
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfec...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,094.50
Make a selection
Special intake hose kit for enhanced performance vehicles.
The original plastic tubes are restrictive on one side and have different lengths. Our reinforced suction hoses kit replaces the narrow and different lengths plastic tubes. This is a perfect homogeneous intake air guide from the intake manifold to the turbocharger and provides a smooth power delivery.
Design to withstand the vacuum pressure and will not collapse.
Made for the 993 GT2 racecars.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1994-98
By ordering this part number you get after previous sending in
Your wishbone overhauled with new race-silent blocs back.
The race-sílent blocs (85 shore) give you more stable driving.
Should it not be repairable, we will inform you immediately.
Fits: GT2 (96-98), turbo (95-98), c4s (96-98), c4 (95-98), c2s (96-98), c2 (94-98)
General Fitment 911 1994-98
Kit includes:
Software dme exch., sport air filter
Please note: this dme cannot be flashloaded. Dme must be sent to us.
Genuine:
Engine - 6 cylinder boxer
Capacity - 2480ccm
Compression ratio - 11,0:1
Max. Power - 150kw (204hp) @ 6000rpm
Max. Torque - 245nm (181lbf ft) @ 4500rpm
Max. Speed - 240km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 6.9s
Tuning:
Max. Power - 158kw (215hp) @ 6000rpm
Max. Torque - 260nm (192lbf ft) @ 4500rpm
Max. Speed - 247km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 6.7s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our en...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,053.80
Make a selection
Kit includes:
Software dme, sport air filter, sport header system.
Some models require oxygen sensor relocation.
Please note: this dme cannot be flashloaded. Dme must be sent to us.
Genuine:
Engine - 6 cylinder boxer
Capacity - 2480ccm
Compression ratio - 11,0:1
Max. Power - 150kw (204hp) @ 6000rpm
Max. Torque - 245nm (181lbf ft) @ 4500rpm
Max. Speed - 240km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 6.9s
Tuning:
Max. Power - 162kw (220hp) @ 6000rpm
Max. Torque - 270nm (199lbf ft) @ 5500rpm
Max. Speed - 251km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 6.6s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep u...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,747.90
Make a selection
Scavenging and aeration in the oil pan have been identified as a problem in the 996, 997 and Boxster models that experience high g-forces on the racetrack.
FVD has the solution:
The ?FVD motorsport? Oil pan has the baffling concept of the x51 oil pan. It also increases the oil capacity because the pan is deeper. This pan adds close to 3/4 of quart (0.6 liters) of oil over the original x51 pan. This allows for increased oil cooling and engine performance by preventing oil starvation and oil foaming.
The ?FVD motorsport? Oil pan is also designed with external cooling fins
Which helps to lower the oil temperature.
Models: Boxster, Cayman, 996 and 997 models (excludes 3.8 s, GT3 and turbocharged models).
...(choose a part on the right to read more)
General Fitment 911 2005-08 911 1998-05 CAYMAN 2006-08 BOXSTER 2005-08 BOXSTER 1997-04
From $544.50
Make a selection
Kit includes:
Software dme (fast load), FVD TUV muffler (200 cell catalytics), bmc sportfilter
Endtips bes 997 160 41s must be ordered seperatly.
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 6000rpm
Max. Torque - 620nm (457lbf ft) @ 1950-5000rpm
Max. Speed - 310km/h
Max. Rpm - 6800rpm
Acceleration 0-100km/h - 3.9s
Tuning:
Max. Power - 408kw (555hp) @ 6000rpm
Max. Torque - 745nm (550lbf ft) @ 4000-4500rpm
Max. Speed - 325km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.6s
FVD dme / ecu programming philosophy:
For more than 20 years, FVD-Brombacherhas been setting the standard for Porsche en...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$6,818.90
Make a selection
"brombacher" titanium exhausts are the absolute last word in exhausts for the 997 GT2-rs.
Incredible performance and aggressive sound all in a lightweight titanium system. The system as shown increases performance 25hp and weighs just 25.5 lbs for a huge weight savings in the already heavy rear of the 911.
From the turbo flanges and catalytics (available in 100 or 200 cells), to the tailpipes (Ø 2x85mm), this entire exhaust system (excluding the cells themselves) is made entirely of titanium. The 4 chamber system design reduces the drone in the cabin while retaining a deep, throaty growl unlike other 2 chamber systems from the competition. Our system is designed using the most expensive and highest he...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $10,703.00
Make a selection
Kit includes:
Sport-motronic dme exch., power-flow kit
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 8,5:1
Max. Power - 300kw (408hp) @ 5750rpm
Max. Torque - 540nm (398lbf ft) @ 4500rpm
Max. Speed - 290km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 4.5s
Tuning:
Max. Power - 324kw (440hp) @ 6000rpm
Max. Torque - 600nm (443lbf ft) @ 4500rpm
Max. Speed - 310km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 4.3s
FVD dme / ecu programming philosophy:
For more than 20 years, FVD-Brombacherhas been setting the standard for Porsche engine management software tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in h...(choose a part on the right to read more)
General Fitment 911 1994-98
$2,194.50
Make a selection
Kit includes:
Software ecu software (flashclient cable), power-flow kit, sport header system, sportmuffler (2x90mm tips).
Some models require oxygen sensor relocation.
Genuine:
Engine - 6 cylinder boxer
Capacity - 2687ccm
Compression ratio - 11,0:1
Max. Power - 162kw (220hp) @ 6400rpm
Max. Torque - 260nm (192lbf ft) @ 4750rpm
Max. Speed - 250km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 6.6s
Tuning:
Max. Power - 184kw (250hp) @ 6500rpm
Max. Torque - 300nm (221lbf ft) @ 5000rpm
Max. Speed - 265km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 6.1s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$3,861.00
Make a selection
Kit includes:
Software ecu software (flashclient cable) and sport air filter
Genuine:
Engine - 6 cylinder boxer
Capacity - 3179ccm
Compression ratio - 11,0:1
Max. Power - 185kw (252hp) @ 6250rpm
Max. Torque - 305nm (225lbf ft) @ 4500rpm
Max. Speed - 260km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 5.6s
Tuning:
Max. Power - 195kw (265hp) @ 6400rpm
Max. Torque - 325nm (240lbf ft) @ 4900rpm
Max. Speed - 267km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 5.4s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we ...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,053.80
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|