PORSCHE 997 TURBO TEC TIPS
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Techart twin oval black exhaust tips Porsche 997 tt 07+
The worldest largest aftermarket Porsche tuner, techart, has these exhaust tips for the Porsche 997 turbo.
twin oval design rear tails pipes come in black and are sold as a pair.
vivid racing is an authorized techart distributor and can handle all of your Porsche needs.
General Fitment 911 TURBO/GT2 2007-09
From $1,213.64
Make a selection
The 11.8:1 compression will provide you with more acceleration than kits with 11.3:1 compression. For track use we recommend more aggressive cam (maximum valve lift (tdc) of 2.1 mm) . Piston's have very deep pockets for use with sport valves. These are 107 mm in size so are slip fit and do not require modifications. This kit is ideal for track use but can also be used on the street, it will add 40+ hp (depending on your additional modifications). Mahle pistons are forged for substantially higher and more uniform strength over pistons that are cast. Mahle cylinders are manufactured from st52 steel which has extremely high thermal resistance, they are nikasil coated which reduces wear and friction. We also have ...(choose a part on the right to read more)
General Fitment 911 1994-98 911 1989-94
From $6,080.40
Make a selection
Perfect kit for street use, this is ultra-reliable, factory smooth kit will yield 35+ hp (depending on your additional modifications). These can also be used with OEM valves and camshafts. These are slip fit (107 spigot / 102 bore) and no modifications must be made to the case. Mahle pistons are forged for substantially higher and more uniform strength over pistons that are cast. Mahle cylinders are manufactured from st52 steel which has extremely high thermal resistance, they are nikasil coated which reduces wear and friction. We also have the piston rings (sealing and oil scrapers) pre-installed to ensure reliability. Each of our mahle piston and cylinder kits are complete and ready for installation. We also ...(choose a part on the right to read more)
General Fitment 911 1994-98 911 1989-94
From $6,080.40
Make a selection
Kit includes:
Software dme exch., sport air filter
Please note: this dme cannot be flashloaded. Dme must be sent to us.
Genuine:
Engine - 6 cylinder boxer
Capacity - 2480ccm
Compression ratio - 11,0:1
Max. Power - 150kw (204hp) @ 6000rpm
Max. Torque - 245nm (181lbf ft) @ 4500rpm
Max. Speed - 240km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 6.9s
Tuning:
Max. Power - 158kw (215hp) @ 6000rpm
Max. Torque - 260nm (192lbf ft) @ 4500rpm
Max. Speed - 247km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 6.7s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our en...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,053.80
Make a selection
Mahle 4.1 liter piston and cylinder conversion kit for 996/997 turbo / GT2 & GT2 rs - increased horsepower and torque.* - forged pistons with deeper, mirrored valve pockets. - piston pin bore is off center (deaxiert) for factory quiet operation. - 9.1:1 compression. - 106 mm bore. - piston rings installed directly on the pistons for ease of installation. - made in Germany by mahle gmbh. Water channels and case must be machined to fit. Please add the following to your order: 2 qty. Base gaskets, part # FVD10303905zfd 2 qty. Head gaskets, part # FVD10303905zkd 1 qty. O- ring base set, part # FVD10303905or 1 qty. O- ring head set, part # FVD10303905oro *please note: horsepower and torque gains depend on the softwa...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09 911 TURBO/GT2 2001-05
From $8,474.70
Make a selection
964/993 camshaft 300°-300°-112°, valve hub 3mm
The ultimate cam for club racing and street.
Tech tip:
964 models need no modification (check clearance on valve pockets).
993 models need mechanical rocker arms upgrade and the first bearing support need to be modified with a groove.
Fits: rs (95-96), c4s (96-98), c4 (95-98), c2s (96-98), c2 (94-98), turbo-look (91-94), rs (92-92), c4 (89-94), c2 (90-94)
General Fitment 911 1994-98 911 1989-94
$1,215.74
Make a selection
This camshaft is an excellent choice for those who spend time at clubsport track events or who race. These camshafts are manufactured in Germany by an elite German racing manufacturer, the quality and performance are top shelf. Timing inlet: 300* timing exhaust: 300* md: 112* lift inlet: 13.00 lift exhaust: 13.00 top dead center inlet: 3.00 top dead center exhaust: 2.90 weighs 6.3 lbs. (2.9 kg) please note: these will work on 964 models with upgraded pistons with larger valve pockets, changes to the camshafts are normally not necessary. For 993 models equipped with mechanical rocker arms, a groove must be inserted on the first journal. Please note: different manufacturing tolerances require an inspection of the...(choose a part on the right to read more)
General Fitment 911 1994-98 911 1989-94
From $954.10
Make a selection
964/993 camshaft 300°-300°-112°, valve hub 3mm
The ultimate cam for club racing and street.
Tech tip:
964 models need no modification (check clearance on valve pockets).
993 models need mechanical rocker arms upgrade and the first bearing support need to be modified with a groove.
Fits: rs (95-96), c4s (96-98), c4 (95-98), c2s (96-98), c2 (94-98), turbo-look (91-94), rs (92-92), c4 (89-94), c2 (90-94)
General Fitment 911 1994-98 911 1989-94
From $954.10
Make a selection
964/993 camshaft 300°-300°-112°, valve hub 3mm
The ultimate cam for club racing and street.
Tech tip:
964 models need no modification (check clearance on valve pockets).
993 models need mechanical rocker arms upgrade and the first bearing support need to be modified with a groove.
Fits: rs (95-96), c4s (96-98), c4 (95-98), c2s (96-98), c2 (94-98), turbo-look (91-94), rs (92-92), c4 (89-94), c2 (90-94)
General Fitment 911 1994-98 911 1989-94
$1,215.74
Make a selection
This kit convert's the 997 turbo GT2's / 997gt3 rs pccb rotors to 997 GT3 cup car steel rotors with green cup car pads. Only for 5-hole, not center lock . This system is complete with everything that you need to install. Do not ruin your expensive ceramic brake discs on the track. Get ready for racing with the original and much cheaper Porsche motorsport steel brake discs! What's in the box: 4 x 2-piece brake discs (380 x 34 mm - front / 350 x 28 mm - rear) 4 x wear sensors 8 x cup brake pads (racing green) 8 x screws for brake caliper 8 x damping plates technical tip: also order stainless steel brake lines (FVD b96 355 97) and racebrake fluid (012 145 ca).
This item may need to be sourced from Germany an...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09
From $6,320.60
Make a selection
K-16/24 turbo (up to 555hp)
Power is focused on low and mid range rpm?s.
Facts:
Larger compressor wheel with extended tip. 47.5mm inducer diameter.
Cnc modified compressor housing
Modified and improved back plane
Uprated staggered gap turbine
Uprated thrust bearing
Modified wheel to reduce backpressure
Balancing of all components
Factory vacuum unit
New bearings and seals
All parts are reconditioned and balanced
FVD brombachers 993 k-16/24 remanufactured turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications.
The remanufacturing process starts with re-profi...(choose a part on the right to read more)
General Fitment 911 1994-98
$2,506.75
Make a selection
K-16/24 turbo (up to 555hp)
Power is focused on low and mid range rpm?s.
Facts:
Larger compressor wheel with extended tip. 47.5mm inducer diameter.
Cnc modified compressor housing
Modified and improved back plane
Uprated staggered gap turbine
Uprated thrust bearing
Modified wheel to reduce backpressure
Balancing of all components
Factory vacuum unit
New bearings and seals
All parts are reconditioned and balanced
FVD brombachers 993 k-16/24 remanufactured turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications.
The remanufacturing process starts with re-pro...(choose a part on the right to read more)
General Fitment 911 1994-98
$2,506.75
Make a selection
997 GT3 rear spoiler fits all 997 (not turbo)
Includes: deck lid, aluminum upright, 3rd brake light housing and wing (l= 145cm, b=28cm, h=7 cm) with end plates. Material: aluminum, fiberglass.
Also available with wing blade in kevlar / carbon FVD 512 997 GT3 rs2
Tech tip:
Facelift models (2009- ), the 3rd brake light can usually be assumed. If necessary please order the 3rd brake light 997 631 052 01 separately.
The holes for the intake fan on the rear deck lid must be drilled prior to installation (model variations). Please note wing is fixed and is not adjustable.
The air inlet of the rear is not included. Please order 99751262591g2x
Fits: GT3 rs, 4l, 368kw (11-), 3.8l, 331kw (10-), GT...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 2009-12 911 2005-08
From $3,174.70
Make a selection
This kit convert's the 997 turbo GT2's / 997gt3 rs pccb rotors to 997 GT3 cup car steel rotors with green cup car pads. This system is complete with everything that you need to install. Do not ruin your expensive ceramic brake discs on the track. Get ready for racing with the original and much cheaper Porsche motorsport steel brake discs! What's in the box: 4 x brake discs (380 x 34 mm - front / 350 x 28 mm - rear) 4 x wear sensors 2 x cup brake pads (racing green) 8 x screws for brake caliper 8 x damping plates technical tip: also order stainless steel brake lines (FVD b96 355 97) and racebrake fluid (012 145 ca).
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once orde...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09
From $3,335.20
Make a selection
The intercooler cores used in this product are of the most advanced design currently produced anywhere in the world. These cores are manufactured by the aerospace company that is currently producing the majority of cooling for formula 1 cars and lead the way in automotive heat exchangers.
The plate and fin design that has been applied to these Porsche 997.1 turbo intercoolers has been designed to allow the minimum pressure drop while shifting the maximum amount of heat in to the received air flow.
Standard extruded tube intercoolers will give reasonable heat dissipation when the internal fin is packed on a vehicle of this power however this will always lead to a high pressure drop and as such not truly ai...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$6,354.70
Make a selection
997 GT3 rear spoiler fits all 997 (not turbo) includes: deck lid (grp), aluminum upright, 3rd brake light housing and kevlar/carbon wing (l= 145cm, b=28cm, h=7 cm) with carbon rsr look end plates. Material: aluminum, glass reinforced plastic (grp), kevlar-carbon. Also available with wing blade in fiber (grp) FVD512997gt3rs tech tip: facelift models (2009- ), the 3rd brake light can usually be assumed. If necessary please order the 3rd brake light 99763105201 separately. The holes for the intake fan on the rear deck lid must be drilled prior to installation (model variations). Please note wing is fixed and is not adjustable. The air inlet of the rear is not included. Please order 99751262592g2x
This item may ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 2009-12 911 2005-08
From $3,704.70
Make a selection
Genuine:
Engine - 6 cylinder boxer
Capacity - 2480ccm
Compression ratio - 11,0:1
Max. Power - 150kw (204hp) @ 6000rpm
Max. Torque - 245nm (181lbf ft) @ 4500rpm
Max. Speed - 240km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 6.9s
Tuning:
Max. Power - 158kw (215hp) @ 6000rpm
Max. Torque - 260nm (192lbf ft) @ 4500rpm
Max. Speed - 247km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 6.7s
Please note: this dme cannot be flashloaded. Dme must be sent to us.
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfec...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,094.50
Make a selection
"brombacher" titanium exhausts are the absolute last word in exhausts for the 997 GT2-rs.
Incredible performance and aggressive sound all in a lightweight titanium system. The system as shown increases performance 25hp and weighs just 25.5 lbs for a huge weight savings in the already heavy rear of the 911.
From the turbo flanges and catalytics (available in 100 or 200 cells), to the tailpipes (Ø 2x85mm), this entire exhaust system (excluding the cells themselves) is made entirely of titanium. The 4 chamber system design reduces the drone in the cabin while retaining a deep, throaty growl unlike other 2 chamber systems from the competition. Our system is designed using the most expensive and highest he...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $10,703.00
Make a selection
Kit includes:
Software ecu software (flashclient cable), power-flow kit, sport header system, sportmuffler (2x90mm tips).
Some models require oxygen sensor relocation.
Genuine:
Engine - 6 cylinder boxer
Capacity - 2687ccm
Compression ratio - 11,0:1
Max. Power - 162kw (220hp) @ 6400rpm
Max. Torque - 260nm (192lbf ft) @ 4750rpm
Max. Speed - 250km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 6.6s
Tuning:
Max. Power - 184kw (250hp) @ 6500rpm
Max. Torque - 300nm (221lbf ft) @ 5000rpm
Max. Speed - 265km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 6.1s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$3,861.00
Make a selection
Kit includes:
Software dme, power-flow kit, sport header system, sportmuffler.
Please note: this dme cannot be flashloaded. Dme must be sent to us.
Some models require oxygen sensor relocation.
Genuine:
Engine - 6 cylinder boxer
Capacity - 2480ccm
Compression ratio - 11,0:1
Max. Power - 150kw (204hp) @ 6000rpm
Max. Torque - 245nm (181lbf ft) @ 4500rpm
Max. Speed - 240km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 6.9s
Tuning:
Max. Power - 169kw (230hp) @ 6000rpm
Max. Torque - 280nm (207lbf ft) @ 5500rpm
Max. Speed - 255km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 6.4s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. ...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$4,261.40
Make a selection
Kit includes:
Software ecu software (flashclient cable) and sport air filter
Genuine:
Engine - 6 cylinder boxer
Capacity - 2687ccm
Compression ratio - 11,0:1
Max. Power - 162kw (220hp) @ 6400rpm
Max. Torque - 260nm (192lbf ft) @ 4750rpm
Max. Speed - 250km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 6.6s
Tuning:
Max. Power - 173kw (235hp) @ 6500rpm
Max. Torque - 280nm (207lbf ft) @ 4750rpm
Max. Speed - 257km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 6.4s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we ...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,053.80
Make a selection
Kit includes:
Software ecu software (flashclient cable), power-flow kit, sport header system and sportmuffler (2x90mm tips).
Some models require oxygen sensor relocation.
Genuine:
Engine - 6 cylinder boxer
Capacity - 3179ccm
Compression ratio - 11,0:1
Max. Power - 185kw (252hp) @ 6250rpm
Max. Torque - 305nm (225lbf ft) @ 4500rpm
Max. Speed - 260km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 5.6s
Tuning:
Max. Power - 206kw (280hp) @ 6400rpm
Max. Torque - 345nm (254lbf ft) @ 4900rpm
Max. Speed - 275km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 5.1s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$4,205.30
Make a selection
Kit includes:
Software ecu software (flashclient cable), sport air filter and sport header system.
Some models require oxygen sensor relocation.
Genuine:
Engine - 6 cylinder boxer
Capacity - 3179ccm
Compression ratio - 11,0:1
Max. Power - 185kw (252hp) @ 6250rpm
Max. Torque - 305nm (225lbf ft) @ 4500rpm
Max. Speed - 260km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 5.6s
Tuning:
Max. Power - 200kw (272hp) @ 6400rpm
Max. Torque - 335nm (247lbf ft) @ 4900rpm
Max. Speed - 270km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 5.3s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche eng...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,747.90
Make a selection
Kit includes:
Software ecu software (flashclient cable) and sport air filter
Genuine:
Engine - 6 cylinder boxer
Capacity - 3179ccm
Compression ratio - 11,0:1
Max. Power - 185kw (252hp) @ 6250rpm
Max. Torque - 305nm (225lbf ft) @ 4500rpm
Max. Speed - 260km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 5.6s
Tuning:
Max. Power - 195kw (265hp) @ 6400rpm
Max. Torque - 325nm (240lbf ft) @ 4900rpm
Max. Speed - 267km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 5.4s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we ...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,053.80
Make a selection
Kit includes:
Software dme, sport air filter, sport header system.
Some models require oxygen sensor relocation.
Please note: this dme cannot be flashloaded. Dme must be sent to us.
Genuine:
Engine - 6 cylinder boxer
Capacity - 2480ccm
Compression ratio - 11,0:1
Max. Power - 150kw (204hp) @ 6000rpm
Max. Torque - 245nm (181lbf ft) @ 4500rpm
Max. Speed - 240km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 6.9s
Tuning:
Max. Power - 162kw (220hp) @ 6000rpm
Max. Torque - 270nm (199lbf ft) @ 5500rpm
Max. Speed - 251km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 6.6s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep u...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,747.90
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|