PORSCHE 356 C GREASCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 1974-77 - Engine (includes uncategorized and accessory items) FVD34101702ATK Unsure about installing replacement bushings and bearings? Send us your control arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process includes full inspection of your track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we will properly install our FVD clubsport front control arm bushings, part # FVD341999r. They are made with 85 shore rubber (like the rennsport model). Please note: each control arm is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your control arm we will notify you as soon as we can. Arrangements can ...(choose a part on the right to read more)
$418.00
Make a selection P209 Change your cars look with the addition of lamin-x taillight kits. available in smoked or charcoal, the thick durable coverings are extremely easy to apply to your vehicle in the precut kits. offering a smooth, glossy, and consistent color throughout, the lamin-x kits are much improved over the less then effective spray on kits. the precut kits have adhesive backs to fit on any flat or shaped surface with ease. the smoked and charcoal kits are tinted only 17 percent allowing 83 percent light passage through. this is a great alternative to bulky plastic light coverings. General Fitment911 1974-77930 1975-77 911 1978-83 911 1984-86 911 1987-89 911 1989-94 911 1994-98 BOXSTER 2005-08
From $62.44
Make a selection QRS001 This fiberglass engine shroud is a great replacement for your missing or cracked factory piece. Note: this does not have the oil cooler duct; may not work with some models. Make sure to examine your existing shroud before ordering. This is a special order part. General Fitment911 1974-77930 1975-77 911 1978-83 911 1984-86 911 1987-89 914 1970-76
$689.00
Make a selection FVD34101707ATK Unsure about installing replacement bushings and bearings? Send us your control arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process includes full inspection of your track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we will properly install our FVD clubsport front control arm bushings, part # FVD341999r. They are made with 85 shore rubber (like the rennsport model). Please note: each control arm is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your control arm we will notify you as soon as we can. Arrangements can ...(choose a part on the right to read more)
$418.00
Make a selection FVD33300902AT Send us your original spring plate and we will have it reconditioned for you. The reconditioning process includes full inspection to ensure proper operation after the remanufacturing process. We then disassemble, degrease and media blast the part. Once fully prepared, we install new rs spec. (85 shore) rubber bushings/bearings. 85 shore rubber is more durable than OEM 65 shore and provides more positive suspension location yet is still quiet and compliant for street use. Then we seal the spring plate with a corrosion resistant plating. Sold individually. 2 necessary per car. Please note: this only fits cars with the g50 transmission.
$261.80
Make a selection FVD116987 Hailing from the baden wurttemberg region in Germany, speaking the language and dealing with lead engineers from the OEM and motor sport manufacturers since 1984 has many advantages. This FVD exclusive clutch kit is culmination of zf sachs race engineering gmbh parts and an aasco motorsports lightweight flywheel that have been developed to work together without compromise. This kit offers a silky-smooth release, superb drivability, can handle more torque than comparable clutch kits. We specifically chose a clutch disc with torsion springs that function as a vibration damper between engine and gearbox that is necessary when removing the factory dual mass flyweel (dmfw). It also means that you will experience an ...(choose a part on the right to read more)
$2,638.90
Make a selection FVD34101802RAK Unsure about installing replacement bushings and bearings? Send us your control arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process includes full inspection of your track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we will properly install our FVD race front control arm bushings. They are made with uniball bearings so suspension motion is accurately repeated in every corner. Please note: each control arm is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your control arm we will notify you as soon as we can. Arrange...(choose a part on the right to read more)
$438.90
Make a selection FVD34101802RAT We will send you a reconditioned control arm, kindly send back your old part, or core . The reconditioned control arm has been full inspected, disassembled, degreased and we have properly installed FVD race front control arm bushings. They are made with uniball bearings so suspension motion is accurately repeated in every corner please note: each control arm is remanufactured in Germany, so the lead times can vary. This part is sold on an exchange basis, as such an additional charge (a core deposit) will be added to the purchase price of the part. After receiving your new part, kindly send back your old part, or core . Once the core is returned to us and it has been inspected to ensure it is rebuild-able and re...(choose a part on the right to read more)
$440.00
Make a selection FVD34101702RAK Unsure about installing replacement bushings and bearings? Send us your control arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process includes full inspection of your track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we will properly install our FVD race front control arm bushings. They are made with uniball bearings so suspension motion is accurately repeated in every corner. Please note: each control arm is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your control arm we will notify you as soon as we can. Arrange...(choose a part on the right to read more)
$438.90
Make a selection MSPP009 These side stripes give your Porsche a great presence on the street! An original dealer installed item and factory equipment, these stripes look great on vintage cars and gives new Porsche a retro-racing touch. They are easy to install using a little soapy water and masking tape guide line. Stripes are 76.5 inches long. Sold as a set of two, one for each side of your car. General FitmentALL914 1970-76
$75.00
Make a selection FVD123019ATK Our k24 sport turbocharger is based off the optional k24 turbochargers, found in the GT2 or 993 turbo x50 models. They are remanufactured by borg warner certified technicians in Germany and are a cost-effective solution. The remanufacturing process includes full inspection of the turbocharger to ensure proper operation after the remanufacturing process. We then disassemble, clean and degrease the unit. The compressor wheels are exchanged, lightened and modified for more air flow. All clearances / shaft tolerances are checked for precision to ensure reliability. The end result is 20-30 additional horsepower, in the low and mid rpm range over the factory turbo. The sport turbo also has less lag than a factory k24...(choose a part on the right to read more)
$2,042.70
Make a selection 98611198000 Beautifully chrome-plated stainless steel tail pipe extension. Fits standard exhaust pipe. Great accent, better appearance.
$392.76
Make a selection 99312301452ATK Our k-16 remanufactured turbo is cost competitive and is a direct replacement. Simply send us your original k16 turbochargers and a borg warner / kkk certified technician will remanufacture your turbo. The remanufacturing process includes full inspection to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we will replace the turbine wheels, thrust bearings, install new seals, recondition the internals and high speed balance the turbo. This ensures reliability and superior performance for many years to come. The remanufacturing is done on an exchange basis only. You must send us your original k16 turbocharger. After receiving y...(choose a part on the right to read more)
$2,194.50
Make a selection M998201 The service seat attachment converts either a standard or heavy duty auto dolly (12" or 16") into one of the most useful and durable rolling seats you will ever use. They've taken the all-steel auto dolly and its great non-marring caster set and added a strong seat support with a professional extra-wide saddle-style seat that will be comfortable, even for extended periods of time. The saddle-style seat also contains internal spring supports that you'll find far superior to a layer of foam when your comfort is on the line. When considering the value our service seat attachment provides, just think about how many of the inferior seat creepers your neighbor will be buying and throwing in the trash while you en...(choose a part on the right to read more) General FitmentACCESSORY
$190.00
Make a selection SNX002 Sonax premium class paint cleaner is the optimum abrasive polish for preparation of a paint surface. It is a silicone-free paintwork cleaner that safely and effectively degreases the paint surface and removes smear films caused by silicone, oil and wax deposits. Sonax premium class paint cleaner contains nanotechnology-refined, high-end alumina which ensures a smooth and consistent polishing effect. New paintwork surfaces are gently made to shine without producing holograms or other unwanted polishing structures. It is ideal for the care and maintenance of scratch resistant ceramic clear coats. It will considerably increase the durability of a follow up sealing or protecting treatment (i.e. Sonax premium class ...(choose a part on the right to read more) General FitmentACCESSORY
$28.95
Make a selection GR6001 Make clean-up a snap! Use this solvent to clean brushes and any other tools used in your restoration project. Also great for thinning por-15 rust preventative coating. General FitmentACCESSORY
$24.50
Make a selection GR1016 Protect your rocker panels from debris and rocks. Applies thinly where smoother textures are desired. Dries quickly. Also works well to touch-up damaged areas for a like-new look. Great for refinishing 914 tops! General FitmentACCESSORY
$44.65
Make a selection GR0210 Excellent product to thoroughly clean the grease from the bottom of your Porsche. Clinging foam desolves grease and then just a simple spray off works wonders. Environmentally sound!
$15.99
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |