Vehicles
Sections
64 not categorized PORSCHE 944S TURBO WHEELSCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 TURBO/GT2 2001-05 (includes uncategorized and accessory items) 20934TD8SS It was only a matter of time before clutch masters built the ultimate clutch kit for the Porsche 996 and 997 turbo. With the success of their stage 3 OEM replacement kits holding 700 horsepower with daily driveability, clutch masters wanted to step up their clutch game and release this new 8.5 inch twin disk clutch with flywheel for the Porsche 911 turbo. This race version of the twin disk is recommended only for race use as initial pedal engagement as it requires finesse. The complete clutch weighs an astonishing 23lbs. The stock flywheel alone weighs about 40lbs! General Fitment911 TURBO/GT2 2001-05911 TURBO/GT2 2007-09
$6,156.00
Make a selection 240997351GV Pagid is one of the leading manufacturers for asbestos free racing brake pads and offers compounds for every Porsche®. The correct brake pad can make the difference between winning and losing. Pagid race pads are only for racing. Correct brake-in after refreshing the brake pads: * 3 to 4 brake applications with medium pedal pressure from 100 mph to 50 mph. Allow 900-1500 feet cooling time between brake applications. * 2 to 3 brake applications with harder pedal pressure from 110 mph to 60 mph. Allow 1500 feet cooling time between brake applications. Avoid wheel lock-up and abs. * 1 to 2 in-between clean-up brake applications. Do not allow the brake pads to overheat during the break in period. Yellow: the suc...(choose a part on the right to read more) General Fitment911 2009-12911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05
From $355.10
Make a selection WAPC20SET01 Study the rich history of Porsche off-road and all-wheel drive technology with this four-vehicle set. Includes 911 east african safari rallyecar, 911 monte carlo rallyecar, 959 paris-dakar competitor, and Cayenne turbo. All in 1:43 scale, complete with off-road theme case. In a limited edition of 5000 sets.
$196.90
Make a selection BBI9964010002 Finally, a complete solution to properly widen the front track width of a Porsche 996 and 997 turbo. To help increase front end grip, this kit allows full negative camber adjustment without binding the axles and fitment of wider wheel/tire combinations and GT3 cup car fenders. Each kit includes lower control arms, thrust arms, axle spacers, upper mounts, and camber shims.
$3,695.00
Make a selection AP9972TT170 The stock exhaust of the Porsche 997.2 turbo is very restrictive compared to aftermarket systems. Porsche does this to meet sound and emission purposes like most OEM manufacturers. agency power set out to create an exhaust system for the new Porsche 997.2 turbo 6speed or pdk that did not drone, would produced amazing performance, and under throttle give an incredible sound. we have accomplished this! the new agency power exhaust not only saves about 30lbs off the rear end, it also improves power quite a bit.
$3,749.95
Make a selection FVD11610312 Sport clutch kit with rigid clutch disk (for cars already equipped with a light flywheel). General Fitment911 TURBO/GT2 2007-09911 TURBO/GT2 2001-05 911 1994-98 911 1989-94
$1,848.09
Make a selection FVD123048 FVD Brombacher997.2 tt "700 series" upgraded turbos facts: - modified compressor housing for the 3.8 l displacement - modified & lightened billet compressor wheel with 12 blades - 49.55 mm inducer - 68 mm exducer - remanufactured by borg warner certified technicians - shaft tolerances are strictly maintained to ensure durability - free software update for those already running FVD software we start by re-profiling the OEM vtg turbocharger compressor housing and modifying the compressor backing plate. This is done to replace the factory compressor wheel with a larger 12 blade, modified compressor wheel. The larger wheel is also lightened allows the turbo to flow a larger volume of air (more power), and aids i...(choose a part on the right to read more)
$6,413.00
Make a selection FVD123019ATK Our k24 sport turbocharger is based off the optional k24 turbochargers, found in the GT2 or 993 turbo x50 models. They are remanufactured by borg warner certified technicians in Germany and are a cost-effective solution. The remanufacturing process includes full inspection of the turbocharger to ensure proper operation after the remanufacturing process. We then disassemble, clean and degrease the unit. The compressor wheels are exchanged, lightened and modified for more air flow. All clearances / shaft tolerances are checked for precision to ensure reliability. The end result is 20-30 additional horsepower, in the low and mid rpm range over the factory turbo. The sport turbo also has less lag than a factory k24...(choose a part on the right to read more)
$2,042.70
Make a selection FVD123013 K-16/24 turbo (up to 555 hp) power is focused on low and mid-range rpm's. Facts: larger compressor wheel with extended tip. 47.5mm inducer diameter. Cnc modified compressor housing modified and improved back plane uprated staggered gap turbine uprated thrust bearing modified wheel to reduce backpressure balancing of all components factory vacuum unit new bearings and seals all parts are reconditioned and balanced FVD Brombacher993 k-16/24 new turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications. The process starts with re-profiling the OEM turbocharger compressor housing and m...(choose a part on the right to read more)
$2,976.60
Make a selection FVD123013ATK K-16/24 turbo (up to 555 hp) power is focused on low and mid range rpm's. Facts: larger compressor wheel with extended tip. 47.5mm inducer diameter. Cnc modified compressor housing modified and improved back plane uprated staggered gap turbine uprated thrust bearing modified wheel to reduce backpressure balancing of all components factory vacuum unit new bearings and seals all parts are reconditioned and balanced FVD brombachers 993 k-16/24 remanufactured turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications. The remanufacturing process starts with re-profiling the OEM turbochar...(choose a part on the right to read more)
$2,976.60
Make a selection FVD123020ATK Our k24 sport turbocharger is based off the optional k24 turbochargers, found in the GT2 or 993 turbo x50 models. They are remanufactured by borg warner certified technicians in Germany and are a cost-effective solution. The remanufacturing process includes full inspection of the turbocharger to ensure proper operation after the remanufacturing process. We then disassemble, clean and degrease the unit. The compressor wheels are exchanged, lightened and modified for more air flow. All clearances / shaft tolerances are checked for precision to ensure reliability. The end result is 20-30 additional horsepower, in the low and mid rpm range over the factory turbo. The sport turbo also has less lag than a factory k24...(choose a part on the right to read more)
$2,042.70
Make a selection FVD11610313 Race clutch kit with rigid sinter clutch disk (for cars already equipped with a light flywheel). General Fitment911 TURBO/GT2 2007-09911 TURBO/GT2 2001-05 911 1994-98 911 1989-94
$2,065.87
Make a selection FVD11610311 This FVD exclusive clutch kit is culmination of Porsche genuine parts, zf sachs race engineering gmbh parts and motorsports parts. It has been developed to replace a kit that already has an existing lightweight flywheel that does not need to be replaced. We specifically chose a clutch disc with torsion springs that functions as a vibration damper between engine and gearbox, to give you an effortless release. This kit is suited for daily use and offers a superior driving experience. It offers a silky-smooth release, superb drivability, can handle more torque (583 ft/lbs. / 790 nm max.). Clutch kit includes: 1 qty. Clutch disc 1 qty. Pressure plate 1 qty. Release bearing 1 qty. Spline lubricant 9 qty. Pressure pl...(choose a part on the right to read more) General Fitment911 TURBO/GT2 2007-09911 TURBO/GT2 2001-05 911 1994-98 911 1989-94
From $1,861.25
Make a selection FVD332911G50 Helical lsd differential is suitable for Porsche with g50 gearboxes, to replace the standard open differential. A direct replacement for the standard Porsche differential. General Fitment911 GT3 2003-05911 TURBO/GT2 2001-05 911 1994-98 968 1992-95 911 1989-94 911 1970-73
From $2,094.55
Make a selection VR996TTTDSTG2 With a strong background in Porsche 996 turbo product development and tuning behind us, it is time to take the factory 996 turbochargers to the next level. Now available is our GT2 style billet compressor wheel upgrade for the k16 or k24 turbos. Where the 16g and 18g turbo upgrade were the norm of years past, new technology, machining processes, and r&d has made available these billet compressor wheels to produce more power, with better throttle response, and longer term reliability than the mitsubishi hybrid wheels. In addition to the compressor wheel upgrade, we update the factory wastegates to a turbosmart adjustable wastegate actuator. You can achieve the common 1.0bar setting or have it adjusted to your ne...(choose a part on the right to read more) General Fitment911 TURBO/GT2 2001-05
$3,780.00
Make a selection VR996TTTDSTG1 With a strong background in Porsche 996 turbo product development and tuning behind us, it is time to take the factory 996 turbochargers to the next level. Now available is our GT2 style billet compressor wheel upgrade for the k16 or k24 turbos. Where the 16g and 18g turbo upgrade were the norm of years past, new technology, machining processes, and r&d has made available these billet compressor wheels to produce more power, with better throttle response, and longer term reliability than the mitsubishi hybrid wheels. These stage turbo upgrades require OEM turbochargers in functional condition to be rebuilt. You can either send in your cores to be rebuilt or purchase new ones. General Fitment911 TURBO/GT2 2001-05
$2,700.00
Make a selection VMULSAN198B Victor equipment redefines performance wheels for the discriminating Porsche owner. Victor wheels are designed specifically and exclusively for Porsche cars and suvs. Instead of adapting existing design to fit, every victor wheel is designed specifically for your car, with the correct bolt patterns and offsets for the perfect look and perfect fit. Victor equipment wheels have been engineered to complement the performance and racing aesthetic of your Porsche. General FitmentCAYMAN 2006-08911 1998-05 911 TURBO/GT2 2001-05 911 2005-08
$870.95
Make a selection FPOR0870 B&b lemans muffler exhaust w/ quad tips Porsche 996 tt 01-05 General Fitment911 TURBO/GT2 2001-05
$6,213.35
Make a selection FVD123025AT K24/26 exchange turbo (only OEM k24 exchange accepted) General Fitment911 TURBO/GT2 2001-05
$2,506.75
Make a selection FW934AL An excellent performance upgrade. Lightened steel flywheels are susceptible to shattering under aggressive driving conditions. Because aluminum is lighter than steel, we are able to produce aluminum flywheels utilizing stock dimensions. Aluminum flywheels are perfect for road racers looking for quicker revs. It is also a nice complement for turbocharged cars experiencing lag. General Fitment911 1994-98911 TURBO/GT2 2001-05 911 GT3 2007-11 911 TURBO/GT2 2007-09
$1,275.75
Make a selection FVD50399701MM Louvers slats they are such a unique feature, so important. By opening the front fenders, and allowing the hot air from the brakes to get ventilated out of the wheel arch! To mount on top or bottom of the exist front fender. For all Porsche 997 Carrera | s | 4s | GTS | GT3 | targa | turbo s | GT2 | GT2 rs | sport classic
$640.20
Make a selection HR5511 If you have room in your fender well to spacer your wheels out, here is an easy way to improve your Porsche’s handling. Made of aluminum/magnesium alloy these hard anodized spacers are hub-centric and up to 70% lighter than typical steel wheel spacers. Made in Germany. Spacers come with wheel bolts, studs and nuts. General Fitment356 1960-65912 1965-69 911 1989-94 911 1987-89 911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73 911 1965-69 911 1994-98 914 1970-76 924 1986-88 928 1978-82 928 1983-86 928 1987-91 928 1992-95 944 1982-85 944 1985-88 944 1989-91 968 1992-95 BOXSTER 1997-04 BOXSTER 2005-08 CAYMAN 2006-08 CAYENNE 2003-06 CAYENNE 2007-10 911 1998-05 911 TURBO/GT2 2001-05 911 GT3 2003-05 911 2005-08 911 GT3 2007-11
$275.45
Make a selection 99636170100 Known as: sticker for emergency wheel english / sticker / sticker english View/Change Diagram
$24.40
Make a selection FU198513056S Silver anodized center w/ black satin windows and silver anodized lip General Fitment944 1985-88944 1989-91 968 1992-95 BOXSTER 1997-04 BOXSTER 2005-08 BOXSTER 2009-11 CAYMAN 2006-08 CAYMAN 2009-12 911 1989-94 911 1994-98 911 1998-05 911 TURBO/GT2 2001-05 911 TURBO/GT2 2007-09 911 TURBO/GT2 2010-13 911 GT3 2003-05 911 2005-08 911 2009-12 911 GT3 2007-11
$2,013.17
Make a selection FU191113051S Silver anodized center w/ black satin windows and silver anodized lip General FitmentBOXSTER 2009-11BOXSTER 2005-08 BOXSTER 1997-04 968 1992-95 944 1989-91 944 1985-88 911 1989-94 911 1994-98 911 1998-05 911 TURBO/GT2 2001-05 911 TURBO/GT2 2007-09 911 TURBO/GT2 2010-13 911 GT3 2003-05 911 2005-08 911 2009-12 911 GT3 2007-11
$2,181.22
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |