PORSCHE CAYENNE DEL SOLCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 912 1965-69 - Rear Axle (includes uncategorized and accessory items) 96534703200SP We are committed to Porsche cars and are very happy to release an outer tie rod that consists of a monoball joint. Until now this was something that was really only available on racing models. Our tie rod will provide you with unequalled steering precision for street and track use. This component is manufactured in europe and contains the finest materials available, high carbon steel and 7075 t6 aluminum. Installation is seamless, this is a direct replacement for the OEM part number, 965 347 032 00. Sold individually. 2 needed per car. We also suggest replacing your inner tie rod, we have a uniball option, our part # 96434705805sp (qty. 1 is needed) and now is also a good time to replace your worn out inner tie...(choose a part on the right to read more)
$251.90
Make a selection 99663114380 Please note: this is for cup / r models up to 2001. They have the cut out for the clear headlight corner trim. All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$335.50
Make a selection 99919233850EQ Belts undergo a lot of friction and wear. They are cost effective to change and will keep your alternator and engine in good condition. Be sure to follow recommended service and replacement intervals set by Porsche on belts. Please note: specific model fitment information below. Sold individually. 1 necessary per car.
$14.30
Make a selection 99336105700EQ Genuine quality wheel nut and lock set in black. The set includes a key. Please check the exact model designation for this part below. Sold as a set. 1 set necessary per car.
$106.70
Make a selection 99335512901EQ Classic Porsche flexible brake hoses can suffer from dry rot and can eventually split and leak fluid, creating a serious safety concern. This line is a high quality replacement, designed to perform like the original and has the same length and threaded ends. It also includes a rubber support grommet and shield just like the original. We recommend inspecting all of your brake lines and hoses the next time you change your brake pads. Sold individually. 2 necessary per car. For 1995 -1998 models.
$19.80
Make a selection 9A160410400EQ If your starter is on its way out, you will notice an intermittent clicking noise and a delay in the vehicle starting. Eventually, you will hear a metallic screeching noise that is a sure sign that your starters bendix mechanism, bearings or solenoid are kaput. When ordering a new starter, be sure to check the protection cap on the terminal for cracks which allows moisture in and causes pre-mature failure. High-quality denso OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car.
$506.00
Make a selection 99310541901EQ Exhaust valve for 993 models from 1994-1995 with m64.05/06/07/08 motors. 8 mm stem, 42.5 mm, weighs .22 lbs. (.1 kg). Sold individually. 6 necessary per car. When working on your cylinder head, we recommend replacing the valves, valve seat rings, guides, springs, retainers and temperature sensor at the same time to reduce future labor costs.
$44.00
Make a selection 9A160410300EQ If your starter is on its way out, you will notice an intermittent clicking noise and a delay in the vehicle starting. Eventually, you will hear a metallic screeching noise that is a sure sign that your starters bendix mechanism, bearings or solenoid are kaput. When ordering a new starter, be sure to check the protection cap on the terminal for cracks which allows moisture in and causes pre-mature failure. High-quality denso OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car.
$485.10
Make a selection 9A110221200 High-quality ina OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. This part includes the protection cap, bearing and roller housing. Sold individually. 1 necessary per car. Please note: please check the model fitment tab to ensure accurate fitment.
From $19.25
Make a selection 93042340109 The clutch cable disengages the clutch in order to safely shift the transmission. A failing clutch cable can produce the same symptoms as a failing clutch, so we recommend replacing the cable / cables when installing a new clutch. High-quality OEM replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. This part number supersedes part numbers 930 423 401 02 / 03 / 05. Sold individually. 1 necessary per car. Please note: this fits the 1978 930 3.3 l turbo model from chassis # 930 880 0192 on.
From $27.00
Make a selection FVD10699710 This radiator is produced by the racing & high-performance division of csf who design, engineer and manufacture the most advanced, efficient, and reliable cooling systems in the world. Csf manufacturers all aluminum high performance radiators that are a direct-fit replacement for Porsche racecars and streetcars. Csf radiators improve cooling efficiency by 10-20 % over the factory radiators. Each radiator is stamped to the same geometry and includes aluminum end tanks that offer more reliability than the factory plastic end tanks. Each csf end tank features quality welding and is generally considered the strongest tank design in the industry. If you are planning to upgrade or replace your radiators, we highly re...(choose a part on the right to read more)
$526.90
Make a selection FVD11GK181GF Motorsport quality grp (glass-reinforced plastic) front bumper bar. Features: - produced by an German motorsport manufacturer. - lightweight 5.7 lbs. (2.6 kg) - made of high strength, grp (glass-reinforced plastic) sold individually. 1 necessary per car. Please note: please provide us with the year / model. These are motorsport quality parts that take time to manufacture and cure properly. Lead times can vary anywhere from 15-30 days depending on where you are in the world. All grp products must properly be fitted and completely prepared prior to paint.
$559.90
Make a selection F8764121000294C Instrument faces are one of the most visible and frequently looked at components in your Porsche. When making the decision to change them you want to ensure that you select a high-quality product like your originals. Each of our sets are made in Germany and use the factory scripting (font). Our faces also offer the same uniform night-time shading and include the original die cut notches for easy installation. Each set varies, so simply pick out the faces that match your originals. They are available in a variety of colors to make a bold statement, or to match interior or exterior color schemes. Don't see the color or combination that is right for your car? Or perhaps you want a custom logo in the tach? Kindly ...(choose a part on the right to read more)
$658.90
Make a selection BES97005080S11 Brombacher panamera s & 4s "sound version" sport muffler - 10 crank hp & + 9 crank torque. - 2.5'' tubing (63,5mm) straight through design for maximum power. - 11 lb. Weight savings. - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - quad 4'' (100mm) round tips sold separately for basic OEM systems (without Porsche sport exhaust)* - tips can be individually adjusted for personal taste. - deeper tonal quality and louder volume which enhances 4.8 l Porsche sound.** - no ecu (software) programming necessary. - will work with OEM exhaust components. - absolutely no drone in the cabin. - does not interfere with emissions and will not trigger the check engine light. - made in Germany...(choose a part on the right to read more)
$2,476.10
Make a selection FVD10699702 This radiator is produced by the racing & high-performance division of csf who design, engineer and manufacture the most advanced, efficient, and reliable cooling systems in the world. Csf manufacturers all aluminum high performance radiators that are a direct-fit replacement for Porsche racecars and streetcars. Csf radiators improve cooling efficiency by 10-20 % over the factory radiators. Each radiator is stamped to the same geometry and includes aluminum end tanks that offer more reliability than the factory plastic end tanks. Each csf end tank features quality welding and is generally considered the strongest tank design in the industry. If you are planning to upgrade or replace your radiators, we highly re...(choose a part on the right to read more)
$548.90
Make a selection FVD375002 This mount kit is a solid upgrade like the European super cup cars. They will provide you with a more responsive chassis and faster lap times with a tighter feel to the car. Note: you will experience more vibration and more noise with solid mounts. Be sure to check the fits these models tab as these do not fit every model.
$87.99
Make a selection RES96400100S1 More low and mid-range torque than our race system with cat bypass. Larger primaries, larger collector, largest diameter tubing on the market. Made for mid-range and top end performance with the added beauty of dual exhaust tips! + 25 hp & + 23 torque - 100 cell hjs tri-metallic race catalytics. -2 1/2 tubing (63.5mm) for max. Power across the rpm range.* -weighs 49 lbs. (22 kg). -German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - aeroquip cone style catalytic connection design to prevent exhaust leaks. -includes aeroquip quick release clamps. -made in Germany by m&m exhaust, gmbh. -dual round 3 exhaust tips -intoxicating flat 6 growl at idle, partial throttle and wide open throttle. P...(choose a part on the right to read more)
$7,772.60
Make a selection F8764121007TIP Instrument faces are one of the most visible and frequently looked at components in your Porsche. When making the decision to change them you want to ensure that you select a high-quality product like your originals. Each of our sets are made in Germany and use the factory scripting (font). Our faces also offer the same uniform night-time shading and include the original die cut notches for easy installation. Each set varies, so simply pick out the faces that match your originals. They are available in a variety of colors to make a bold statement, or to match interior or exterior color schemes. Don't see the color or combination that is right for your car? Or perhaps you want a custom logo in the tach? Kindly ...(choose a part on the right to read more)
$603.90
Make a selection F8764121007MTIP Instrument faces are one of the most visible and frequently looked at components in your Porsche. When making the decision to change them you want to ensure that you select a high-quality product like your originals. Each of our sets are made in Germany and use the factory scripting (font). Our faces also offer the same uniform night-time shading and include the original die cut notches for easy installation. Each set varies, so simply pick out the faces that match your originals. They are available in a variety of colors to make a bold statement, or to match interior or exterior color schemes. Don't see the color or combination that is right for your car? Or perhaps you want a custom logo in the tach? Kindly ...(choose a part on the right to read more)
$603.90
Make a selection BES99110200SK "brombacher" stainless steel exhaust system with valves for the 991 + 25 hp & + 20 tq gain. - 200 cell hjs "hd" sport catalysts. - 25 lb. Weight savings over OEM system (weighs 59 lbs. (27,0 kg), OEM weighs 84 lbs. (38kg). - 2 3/4 tubing (70mm). - 4 x 3.5 (90mm) round tips. - motorsport merge collector. - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - absolutely no drone in the cabin. - "aero quip" style motorsport connections without gaskets or flanges to ensure a leak free exhaust. - does not interfere with emissions and will not trigger the check engine light. - ecu programming (software) is not necessary. - under load (moving) with valves closed: 85db* - under load (movin...(choose a part on the right to read more)
$10,030.90
Make a selection FVD362041002 High quality wheel nut and lock set. The set includes a key and teflon insert for your lug tool so the nuts will not be marred when removed. Please check the exact model designation for this part below. Sold as a set. 1 necessary per car.
$35.20
Make a selection 93050306800 Steel, prime coated quarter panel extension, made by dansk. They offer a complete line of replacement bodywork to complement the entire Porsche model range. All dansk products are manufactured to European standards to ensure the quality that you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. 1 necessary per car. Please note: due to variances in production at the factory, age, accident damage or rust, each part may require trimming and or adjustment for perfect fitment.
$244.20
Make a selection FVD20799601 Scavenging and aeration in the oil pan have been identified as a problem in 996 and Boxster models experiencing high g-forces on the racetrack. This oil pan spacer provides a simple solution. This spacer increases sump capacity by half a liter, providing more reserve to ward off starvation. Thisoil pan spacer clears all factory options including the rear skid plate. Added oil capacities as well as increased oil pan surface area increase oil cooling and engine performance. *oil pan and sump baffle are OEM parts and do not need to be purchased material: 6061 t6 aluminum alloy finish: clear anodized weight: n/a models: Boxster, Boxster s, and 996 models (excludes GT3 and turbocharged models) installation: for best...(choose a part on the right to read more)
$283.80
Make a selection FVD351425426EQ A quality, cost effective set of replacement "big red" style calipers. These are a direct replacement for the 965 turbo, 993 c4s / rs and 993 turbo but can be installed on many 964 / 993 models with the correct caliper adapters. Please contact your FVD parts specialist for fitment questions. We also recommend swapping out your brake lines for a set of stainless braided lines when replacing calipers. Also a now is the time to install a set of our speed bleeders, part # FVD910102. They are comparable to part numbers 993 351 425 10 and 993 351 426 10. Please note: these are aftermarket calipers and do not come with the logo or brake pads. Sold individually. 1 necessary per car.
$874.50
Make a selection FVD123019ATK Our k24 sport turbocharger is based off the optional k24 turbochargers, found in the GT2 or 993 turbo x50 models. They are remanufactured by borg warner certified technicians in Germany and are a cost-effective solution. The remanufacturing process includes full inspection of the turbocharger to ensure proper operation after the remanufacturing process. We then disassemble, clean and degrease the unit. The compressor wheels are exchanged, lightened and modified for more air flow. All clearances / shaft tolerances are checked for precision to ensure reliability. The end result is 20-30 additional horsepower, in the low and mid rpm range over the factory turbo. The sport turbo also has less lag than a factory k24...(choose a part on the right to read more)
$2,042.70
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |