Vehicles
Sections
128 not categorized PORSCHE 924 LIGHT LENSCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 914 1970-76 (includes uncategorized and accessory items) FVD36203404 German made lightweight aluminum valve which is anodized in titanium grey. This valve can also work with tire pressure monitoring systems. Maximum pressure: 14 bar length: 43 mm (1.7 inches) valve hole diameter: 11.3 mm (.44 inches) weight: 12 grams made in Germany sold individually.
$18.70
Make a selection FVD36203402 German made lightweight aluminum valve which is anodized in black. This valve can also work with tire pressure monitoring systems. Maximum pressure: 14 bar length: 43 mm (1.7 inches) valve hole diameter: 11.3 mm (.44 inches) weight: 12 grams made in Germany sold individually.
$11.00
Make a selection ER1T911SBF Quality and attention to detail make these sway bars the choice for serious performance. These elephant racing lightweight bars are hollow. They are half the weight of competing bars of equal stiffness. Bearing blocks, drop links, and sway bar arms are cnc machined from aircraft-quality 6061-t6 aluminum for its high strength/weight ratio. Fully adjustable front and rear drop links eliminate suspension preload. Oversized, precision teflon-lined rod-ends provide long life, smooth operation, and high-reliability. Adjustable drop-link arm connection design provides infinitely adjustable sway bar stiffness rate and makes it easy to fine-tune your car's handling for various track conditions and driving s...(choose a part on the right to read more) General Fitment911 1965-69911 1987-89 911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73 914 1970-76
$619.99
Make a selection 91453182110 The "b" part is an excellent reproduction of the original seal. The r and g are originals. this is the seal that fits on the unibody between the rocker carpet and the threshold, this assures a good door seal and no rattles! slightly smaller than the original it is easily installed with a plastic hammer (or a strong heel of the hand!) order the corresponding seal on the door for the tightest fit. View/Change Diagram
From $37.10
Make a selection 91463100000 Newly produced side marker lenses for 914. These have been unavailable from the factory for some time, now available in clear. Sold in left/right pairs. These clear side marker lenses are a good compliment to our italian clear taillight lenses, and clear front turn signal set. set the whole thing off with a clear rear update kit. General Fitment914 1970-76
From $52.00
Make a selection 30100310 Centric parts premium brake pads provide superior stopping power and reliability for passenger cars and light duty trucks. Centric parts' engineers have worked with leading brake pad manufacturers to develop two application specific friction compounds that combine improved braking performance and reduced noise under braking. All centric premium brake pads are installation ready with shims installed to prevent noise associated with pad vibration. Centric premium brake pads also feature o.e. Style gas slots and chamfers to optimize braking performance in repeat stop situations. All centric premium brake pad formulas are 100% asbestos free and have o.e. Style wear sensors installed.centric premium ceramic brake p...(choose a part on the right to read more) General Fitment911 1965-69911 1970-73 911 1974-77 912 1965-69 914 1970-76
$38.00
Make a selection 91163160801 Triangular gasket to seal the license plate light lense to the body. View/Change Diagram
From $5.16
Make a selection 91463113110 excellent exact copy of the original h3 euro driving light priced each. View/Change Diagram
$222.07
Make a selection 100555110NFB This is a rear lightweight carpet kit for a rs model or a rs tribute, without back seats. This set is made from German nadel filz. We go to extra lengths to ensure that our carpets are made as closely to the originals as possible. Each is cut, sewn and trimmed to fit perfectly. Details: German nadel filz (needle felt) trimmed in vinyl made in Germany custom made to order sold as a set. 1 necessary per car. Please note: when placing your order, we require the year, model and a list of any interior upgrades like roll bars, etc. This kit is custom made to order.
$1,096.70
Make a selection 113915001 Genuine lightweight aluminum bbs motorsport valve stem. This is used predominantly on bbs motorsport wheels like the e30, e50, e26, e 28 and e88. It has a 28 mm length / 11-13 mm valve hole diameter. Bbs part # 09.15.001. Please check the fitment prior to placing your order. Sold individually.
$16.50
Make a selection 914631937S Smokin’ hot deal on a set of smoked 914 front turn signal lenses give your 914 a smokey demeanor and see our other listings for the smoked rear tail light set. General Fitment914 1970-76
$59.50
Make a selection 100555100RS11H This is a lightweight carpet kit for a rs model or a rs tribute, without back seats. This set is made from German haargarn. We go to extra lengths to ensure that our carpets are made as closely to the originals as possible. Each is cut, sewn and trimmed to fit perfectly. Details: German haargarn made in Germany includes front floormats driver's side vinyl heel pad and side pads (like original) are also included. Custom made to order sold as a set. 1 necessary per car. Please note: when placing your order, we require the year, model and a list of any interior upgrades like roll bars, etc. This kit is custom made to order.
$1,834.80
Make a selection 100555112NB German lightweight sliverknit rear seat delete / rear shelf carpet that was used on the 964 and 993 rennsport models. We go to extra lengths to ensure that our carpets are made as closely to the originals as possible. Each carpet is made with original lightweight German sliverknit and are trimmed in vinyl. Each is cut, sewn and trimmed to fit perfectly. Made in Germany. Sold individually.
$1,151.70
Make a selection BES95B05040SK + 15 hp & + 18 tq gain. - 2.5 tubing (63.5mm). - 4 x 4 (101mm) round tips. - 8.5 lb. Weight savings over OEM mufflers. - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - does not interfere with emissions and will not trigger the check engine light. - ecu programming (software) is not necessary. - electronic valve controller must be removed from the OEM unit and added to our muffler. - made in Germany. Please note: this muffler is a direct replacement the macan turbo (95b) model which comes with a single electronic exhaust valve on the passenger side. This is the very 1st aftermarket muffler for the macan 95b turbo that includes a valve like the factory system. This allows our system ...(choose a part on the right to read more)
$4,544.10
Make a selection BES99125020SK No need for Porsche sport exhaust (pse) envy with this muffler! This offers weight savings and a far more exotic sound than the pse, all without drone. It is the perfect compromise for you and your loved ones. Rich, deep, turbo motorsport tones with the valves open and soft subtle, completely stock sounds with them closed. Top of the line or range depending on the english and is the best choice for a daily driver. Features: - + 16 crank hp & + 15 crank torque. - weighs 37 lbs. (17 kg) - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - direct bolt on replacement for the factory center muffler. - includes necessary installation hardware. - reduces turbo lag, backpressure and thermal lo...(choose a part on the right to read more)
$4,651.90
Make a selection 99363103100 Complete halogen headlight that includes a lens, gasket, h1 bulb, electric motor for headlight levelling, end cap, retaining bar and connector housing. It is complete and ready for installation. Sold individually. 1 necessary per car.
From $1,241.90
Make a selection 98704400004 Smooth-fitting outdoor car cover featuring full-color Porsche logo. waterrepellent fabric protects your Porsche from weather extremes such as strong sunlight. Equipped with an anti-theft protection system. General FitmentACCESSORY
$479.25
Make a selection BES99126010S Our exhaust products are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. Our entire "brombacher" line of exhausts is manufactured by m&m exhaust, gmbh in Germany who is no stranger to Porsche racing exhausts. Each is tested comprehensively for flow rate, thermal stress, resistance to cracking, and longevity. To further ensure quality, m&m use lightweight, motorsports grade, t 316 stainless steel material. Features: polished stainless steel double walled to dissipate heat so discoloration will take longer to appear / easier to polish out includes clamps for installation fits the factory cut outs in the bumper perfectly can be adjusted for...(choose a part on the right to read more)
$600.60
Make a selection BES98215000S The open architecture of this muffler allows for a deeper four-cylinder turbo tone, with plenty of whistling on tap. Coming off throttle from higher rpms exudes a chorus of snarling, gurgling and crackling letting everyone know that this car is not your average 982. + 15 hp & + 12 tq gain. - 2 x 3.5 (90 mm) round tips. - thermal insulation on piping to keep suspension components cool. Withstands up to 2,012 degrees fahrenheit (1,100 degrees celsius). - lower deeper tones than the factory exhaust with far more whistling and gurgling / crackling off throttle. - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - no drone in the cabin. - "aero quip" style motorsport muffler connections t...(choose a part on the right to read more)
$3,367.10
Make a selection ZP9142 Achieve the look of the 911 rear lens between the tail lights and play fill in the void with this highly reflective lens. Made exclusively for the 914 and originally installed as a dealer option. General Fitment914 1970-76
$275.00
Make a selection BES981C1200SGT4 - equal length long tube headers with motorsports merge collector. - 200 cell hd German hjs tri metal sport cats. - primary diameter 50mm outer , 47mm inner for the larger 3.8l displacement. - t316 lightweight stainless steel. - reduces thermal stress on the motor. - made in Germany by m&m exhaust gmbh. Please add 2 engine to header gaskets when ordering - 2 qty 997 111 107 31 power: - 981 GT4 / spyder (3.8l) = + 18 crank hp (13kw) & 16 crank torque ( 21 nm) our latest development for the 981 is aimed at those who are looking for more torque in the mid-range, a rich, deep exhaust growl. These headers contain the latest hjs cats, they are nicknamed "hd" for high durability matrix design catalytic converters. T...(choose a part on the right to read more)
$5,780.50
Make a selection BES99115000S + 11 hp & + 10 tq gain. - 2 3/4 tubing (70mm). - 4 x 3.5 (90mm) round tips. - net weight is 16.4 kg / 36 lbs. (10 lb savings over stock 3.4 l mufflers) - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - absolutely no drone in the cabin. - does not interfere with emissions and will not trigger the check engine light. - ecu programming (software) is not necessary. - 90 db maximum (oem muffler is 75 db for reference). - replaces OEM side mufflers and connects to OEM header and catalytic flange. Please note: this muffler does not include exhaust valves and is meant to replace the OEM system on the base 3.4l 991 (2012+). Power is stated at the crank. This is the very 1st aftermarket muffl...(choose a part on the right to read more)
$3,869.80
Make a selection 91470110600 Excellent reproduction of the 914/6 identification plate found on the side of the headlight box. Replace your missing or weathered plate with a shiny new one! General Fitment914 1970-76
$80.51
Make a selection SP102 The spec stage 2 clutch features segmented or full faced pure kevlar disc with steel backing. This lining features excellent drivability like the stage 1, but offers slightly longer life and higher torque capacity. The hub is double sprung with spring cover relieves for flexibility and heat treated components for strength and durability. Best for street, drag, pulling and autocross. General Fitment914 1970-76
$675.50
Make a selection WAP93600S18 Sporty, lightweight windbreaker made of wind-repellent material. Porsche logo printed on left chest and placed inside under mesh lining. Two pockets on the side with concealed zip fastening. One inside pocket. Knitted edging on hem and sleeves. Black. Mesh lining: 100% polyester. Outer material: 100% polyester. Sizes: s, m, l, xl, xxl. Available in november. General FitmentACCESSORY
$124.16
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |