PORSCHE 924 S WIL VICan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 928 1983-86 - Fuel/Exhaust (includes uncategorized and accessory items) 911606105JXATK The cis injection / k-jetronic warm up regulator is a critical component that performs the following functions: lowers pressure when engine is cold. Absorbs / distributes engine heat. Allows for an additional rich mixture under full load to prevent engine damage. Altitude correction. Send us your original part and we will have it remanufactured for you. We do not offer a core exchange on this part. Each part is remanufactured in Germany, so the lead times can vary. Sold individually. 1 necessary per car. Please note: this part number encompasses: Bosch part 0 438 140 045 for 911 SC models from 1977-80 and Bosch part 0 438 140 089 for 911 SC models from 1980-83
$744.70
Make a selection 90110390200K Refresh the missing horsepower with a brand new set of pistons and cylinders. Restore the lost compression that reringing will never accomplish. Other kits available for large displacement.
$3,938.55
Make a selection 914STIFFKIT This kit has three 16 ga (.06”) steel panels and will significantly stiffen the 914 chassis by tying the two longitude panels and the firewall together to "box" the frame. This kit requires welding and should be performed by a professional. Some modification will be required to install the panels. If you are upgrading your 914 to a six cylinder, doing autocross, or if you simply want to stiffen up the whole chassis, this kit is for you.
$379.50
Make a selection 914301GT For 7” and 9” flares.
$229.00
Make a selection 91436131501S By far the best way you can fit mahle pedrini or fuchs factory alloy wheels on your 914 inexpensive 17mm head 40 mm shank, this set replaces the impossible to find factory originals. The alloys on a 914 need super long threads so without this special bolt the wheels will not hold on.
$119.50
Make a selection 91455903710PKG At last a factory look center console package with gauges and sending unit and harness almost identical to the factory original nla part. package consists of the factory duplicate reproduction center console, the special heater lever, the reproduction console wiring harness, the plastic heater lever bezel, the factory reproduction clock, volt meter, and temperature gauge, the temperature gauge sending unit, the sending unit plate and the sending unit o ring. Everything you need to install this beautiful assembly into your car and update it to the appearance group package offered originally when the car was new. This item is made to order and will take 4-6 weeks.
$795.00
Make a selection 91135295005EQ If your brake pads are at the end of their service life you will experience vibration, squealing, a pulsating brake pedal or poor response under heavy braking. We recommend replacing them as soon as any of the above signs are noticed. Also, be sure to inspect the rotors when changing the pads. For convenience, we sell complete rotor and pad kits, simply check under brake service kits. This pad set contains textar OEM (original equipment manufacturer) parts that we source in Germany to ensure quality, reliability and precise fitment. Textar brake pads are precision engineered to offer maximum safety, performance and comfort. This uncompromising approach has been the very ethos of textar for more than 100 years. ...(choose a part on the right to read more)
$73.70
Make a selection 91134190200ATK By ordering this part number you get after previous sending in, your wishbone overhauled with new silent blocs. Order separately if required 901 341 049 04 or 911 341 049 05 to. Should it not be repairable, we will inform you immediately.
$276.10
Make a selection 92834102733ATK By ordering this part number you get after previous sending in your wishbone overhauled with new silent blocs back. Should it not be repairable, we will inform you immediately.
$342.10
Make a selection 91153170202 As a striker plate ages, it will start to rattle and can potentially be a safety risk. We recommend securing them with new oval head screws, part # 99921900800. 2 screws are needed per plate. We also recommend adding new striker plates gaskets, either 90153170323 or 90153170324 depending on what thickness you need. This line is a high-quality replacement part, sourced in Germany and designed to perform like the original. Sold individually. 1 necessary per car.
From $133.10
Make a selection 96437502301RATK Send us your OEM transmission mount bracket and we will restore it to better than new condition! Our service includes removal of the old mount, media blasting, proper installation of the new mount and protective seal coating. Our transmission mount is manufactured in europe by an OEM supplier using the finest materials (high carbon steel, 7075 t6 aluminum and 85 shore rubber - rs spec). Simply order and send us your OEM bracket, we will take care of the rest. Approximate lead time is estimated between 3-6 weeks.
$176.00
Make a selection 96437502301ATK Send us your OEM transmission mount bracket and we will restore it to better than new condition! Our service includes removal of the old mount, media blasting, proper installation of the new mount and protective seal coating. Our mount is remanufactured in europe by an OEM supplier using the finest materials. It is a 65 shore rubber hardness value which is the same as the what was standard on these cars. Simply order and send us your OEM bracket, we will take care of the rest. Approximate lead time is estimated between 3-6 weeks.
$178.20
Make a selection 9780929758268 The second edition of this book continues the restoration of a 356 Porsche to driver level condition. This book does not spend time or money creating the “perfect” 356, and does not necessarily search for nos (new old stock) replacement panels if a reproduction panel or patch is appropriate; but the book strives to give you a restoration that will be correct, admired and driven. This second edition provides more detail and contains additional comments to assist those restoring a 356 which was purchased disassembled. this second edition follows the restoration of a 1957 sunroof coupe from the time of purchase to the first drive. additionally, detailed comments are provided from vendors, such as media blast...(choose a part on the right to read more) General FitmentACCESSORY
$29.50
Make a selection 96420724107 This hose connects the front of the oil tank to the thermostat housing. We recommend replacing 2 qty. Clamps, part # 99951225202 when replacing this piece. Sold individually. 1 necessary per car. Please note: this will only fit the oil thermostat with part # 964 207 047 05 or 964 207 047 07 or 964 207 047 08.
From $20.90
Make a selection 93010734714 This part is sourced in Germany to ensure quality, reliability and precise fitment. This will fit all the vehicles listed in the fitment tab and those that have been updated to pressure fed tensioners. This line requires that you also purchase part # 93010734706 . We also recommend purchasing 1 qty. Union nut, part # 90010400303 and 1 qty. Cutting ring sleeve, part # n0208251 for installation. Also need the right side? Please order part # 93010734812 for the 911 3.2 l and 930 3.3l. Order part # 93010734815 for the 965 3.3 l. Sold individually. 1 necessary per car.
From $41.80
Make a selection 930123002X This remanufactured turbo is a direct replacement for original part # 930 123 002 00. The remanufacturing is completed in Germany by kkk/borg warner certified technicians. This ensures reliability, superior performance and cost effectiveness. The remanufacturing process includes: complete disassembly. All parts are cleaned, inspected and measured for tolerances. Turbine wheels are replaced. Thrust bearings are replaced. All new seals are installed. Internals are reconditioned. Parts are balanced (static & dynamic) according to balancing protocol. For a complete installation we recommend adding a gasket, part # 93012319105 an intake sleeve, part # 93011015801 and be sure to have a few spare studs on hand, part #...(choose a part on the right to read more)
From $2,981.74
Make a selection 93034702000KIT Will ship when available.
$283.25
Make a selection 96560612601EQ Oxygen or lambda sensors are critical to your engines health. If the sensor is faulty you may experience poor gas mileage, rough idling or engine pinging. High-quality replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Be sure to check the "fits these models" tab to make sure that this will work for your needs. Sold individually. 1 necessary per car.
$111.10
Make a selection 964347009BXATK This steering rack is a remanufactured part with a core, as such an additional charge (a core deposit) will be added to the purchase price of the part. After receiving your new part, kindly send back your old part, or core . Once the core is returned to us and it has been inspected to ensure it is rebuild-able and resell-able, the core deposit will be refunded. The remanufacturing process includes full inspection and testing for structural integrity. We then disassemble and bead blast to remove corrosion. Internals are micro-finished to OEM specifications. Sealing surfaces are carefully checked and restored prior to installing new premium seals and o-rings. Each unit is then carefully tested for full functional...(choose a part on the right to read more)
$1,633.50
Make a selection 96534703200SP We are committed to Porsche cars and are very happy to release an outer tie rod that consists of a monoball joint. Until now this was something that was really only available on racing models. Our tie rod will provide you with unequalled steering precision for street and track use. This component is manufactured in europe and contains the finest materials available, high carbon steel and 7075 t6 aluminum. Installation is seamless, this is a direct replacement for the OEM part number, 965 347 032 00. Sold individually. 2 needed per car. We also suggest replacing your inner tie rod, we have a uniball option, our part # 96434705805sp (qty. 1 is needed) and now is also a good time to replace your worn out inner tie...(choose a part on the right to read more)
$251.90
Make a selection 911561053003EQ Rear window cabrio top section, manufactured in Germany with original sonnenland material. It is as close to the original as possible and is cut and trimmed to fit perfectly. Sonnenland material consists of 3 layers, dyed acrylic twill weave top layer, elastomeric rubber inner layer and polyester woven base layer. It provides increased strength against abrasion, increased fade resistance and the tighter woven layers for the mechanically operated tops. Sonnenland high quality material was originally used by Porsche and other top German manufacturers. Made in Germany. Sold individually. 1 necessary per car.
$984.50
Make a selection 96434101807ATK Unsure about installing replacement bushings and bearings? Send us your control arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process includes full inspection of your track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we properly install our OEM front control arm bushings, part # FVD3419991. They are made with 65 shore rubber like the original control arms. Please note: each control arm is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your control arm we will notify you as soon as we can. Arrangements can be made for...(choose a part on the right to read more)
$418.00
Make a selection 96434705805SP We are committed to Porsche cars and are very happy to release an inner tie rod that consists of a monoball joint. Until now this was something that was really only available on racing models. Our tie rod will provide you with unequalled steering precision for street and track use. This component is manufactured in europe and contains the finest materials available, high carbon steel and 7075 t6 aluminum. Installation is seamless, this is a direct replacement for the OEM number, 964 347 058 05. We also suggest replacing your outer tie rods, we have a uniball option, our part # 96534703200sp or the OEM style, narrow body is part # 96434703200 or wide body is part # 96434703201 (qty. 2 are needed) and now is also...(choose a part on the right to read more)
$207.90
Make a selection 96434101707AT By ordering this article number, you will receive a reconditioned wishbone with newly pressed-in bearings. The calculated replacement deposit will be returned to you as soon as the old part has been received and checked. This item is also available with race bearings (85 shore).article number FVD 341 017 07at the reconditioning process includes full inspection of each track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we properly install our OEM front control arm bushings, part # FVD3419991. They are made with 65 shore rubber like the original control arms. If your old part is not repairable we will inform y...(choose a part on the right to read more)
$418.00
Make a selection 96433102200RATK Unsure about installing a replacement bushing? Send us your trailing arm and we will properly recondition and install the bushing for you. The reconditioning process includes full inspection of your trailing arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we properly install our rear clubsport trailing arm bushings, part # FVD3310212291. Our rear trailing arm bushings contain rubber inserts with a shore hardness value of 85, like what is used on rennsport models. They offer rs style handling characteristics, superior durability and are still forgiving enough for street use. When reconditioning the trailing arms, we als...(choose a part on the right to read more)
$672.10
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |