PORSCHE 997 TURBO WELLS
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 390kw (530hp) @ 6500rpm
Max. Torque - 680nm (502lbf ft) @ 2200-4500rpm
Max. Speed - 329km/h
Max. Rpm - 6800rpm
Acceleration 0-100km/h - 3.7s
Tuning:
Max. Power - 449kw (610hp) @ 6500rpm
Max. Torque - 780nm (575lbf ft) @ 4500rpm
Max. Speed - 340km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.4s
FVD dme / ecu programming philosophy:
For more than 20 years, FVD-Brombacherhas been setting the standard for Porsche engine management software tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in horsepower and torque, all while retaining the drivabi...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$7,643.24
Make a selection
FVD "brombacher" level 1 tuning kit for the 2009- 997s includes our FVD flashload software cable, a single user diagnostic tool with software and a bmc sport air filter.
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 4400rpm
Max. Speed - 300km/h (186mph)
Max. Rpm - 7500rpm
Acceleration 0-100km/h (0-60mph) - 4.5s
FVD level 1 tuning:
Max. Power - 290kw (395hp) @ 6500rpm
Max. Torque - 432nm (319lbf ft) @ 4500rpm
Max. Speed - 305km/h (190mph)
Max. Rpm - 7700rpm
Acceleration 0-100km/h (0-60mph) - 4.4s
For 25 years, FVD-Brombacherhas been setting the standard for Porsche tuning. We alw...(choose a part on the right to read more)
General Fitment 911 2009-12
$1,527.90
Make a selection
The h11 bolt (wmc7 and wmc6) is a high quality, aircraft standard fastener. Under racing conditions, we suggest that the h11 bolts be changed periodically.
All bolts should be lubricated under the heads as well as on the threads. We recommend the bolt lube supplied with the rods, or as an alternative, a molybdenum base paste mixed with engine oil.
The preferred method to torque the bolt is by using the stretch figure 60,75 nm (3/8 sps - wmc6 9,65mm).
Fitment:
Gt2 (01-05) / turbo (01-05) / GT2 (96-98) / turbo (95-98) / cup-race (94-98) / rsr (96-97) / rs (95-96) /
C4s (96-98) / c4 (95-98) / c2s (96-98) / c2 (94-98) / 968cs (93-95) / 968 (92-95) / turbo 3.6 (93-94) / turbo 3.3 (91-92) / cup-race (90-93) ...(choose a part on the right to read more)
General Fitment 944 1982-85 944 1985-88 944 1989-91 911 TURBO/GT2 2001-05 911 1994-98 968 1992-95 911 1989-94 911 1987-89 911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73 911 1965-69
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 390kw (530hp) @ 6500rpm
Max. Torque - 680nm (502lbf ft) @ 2200-4500rpm
Max. Speed - 329km/h
Max. Rpm - 6800rpm
Acceleration 0-100km/h - 3.7s
Tuning:
Max. Power - 507kw (690hp) @ 6500rpm
Max. Torque - 870nm (642lbf ft) @ 4500rpm
Max. Speed - 350km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.2s
FVD dme / ecu programming philosophy:
For more than 20 years, FVD-Brombacherhas been setting the standard for Porsche engine management software tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in horsepower and torque, all while retaining the drivabi...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$19,415.07
Make a selection
Speedart turbo-look front bumper Porsche Boxster 986 97-04
Convert your non-turbo Porsche 986 to the look of a turbo with this complete replacement. Using factory mount points, these bumpers are made in Germany and fit extremely well. The front lip spoiler for this bumper is an actual factory direct Porsche piece. It is interchangeable and removeable. If the shipping rate depending on your area differs, we will contact you with a revised quote. Please add item to cart for shipping cost or contact us for a quote.
General Fitment BOXSTER 1997-04
$2,425.94
Make a selection
Pagid is one of the leading manufacturers for asbestos free racing brake pads and offers compounds for every Porsche®.
The correct brake pad can make the difference between winning and losing. Pagid race pads are only for racing.
Correct brake-in after refreshing the brake pads:
* 3 to 4 brake applications with medium pedal pressure from 100 mph to 50 mph. Allow 900-1500 feet cooling time between brake applications.
* 2 to 3 brake applications with harder pedal pressure from 110 mph to 60 mph. Allow 1500 feet cooling time
Between brake applications. Avoid wheel lock-up and abs.
* 1 to 2 in-between clean-up brake applications. Do not allow the brake pads to overheat during the break in period.
Blue:...(choose a part on the right to read more)
General Fitment 912 1965-69 911 1970-73 356 1960-65
More air = more power! The incredible 997.2 Porsche turbo received a completely redesigned engine with many substantial upgrades. This latest turbo is the most powerful, revolutionary and capable Porsche turbo to ever come out of stuttgart. The 997.2 Porsche turbo may have been labeled a facelift but the engine is another major evolutionary leap forward in Porsche's coveted turbo history. This 7th generation turbo engine, titled the 9a1, delivers 500 hp (530 hp in s models) and once again, raises the performance bar in the sports car world. The new 997.2 ipd turbo plenum was considerably more difficult to design and develop than previous plenums. The good news is that all these efforts have yielded a much easi...(choose a part on the right to read more)
$1,094.50
Make a selection
Sport rear silencer for Porsche Cayenne 955 turbo / turbo s. These sport rear silencers are concipated as absorptive silencers which reduce exhaust back pressure drastically. The result is besides more power and a better response characteristic, a sporty deep hollow sound. Further more the rear silencers are considerably lighter than thestandard product.
Strenghtened brackets as well as the olive- and slide system ensure anexact adjustment, which guarantees a stressless installation. Also the tailpipes can be positionned precisely.
Features:
Stainless steel sport rear silencers
General Fitment CAYENNE 2003-06
$2,368.58
Make a selection
In the quest to create the most well balanced suspension for the 997 turbo, agency power has developed these sway bars to our specifications. The all wheel drive Porsche turbo cars naturally have a lot of under steer. Under steer is when you take a turn but your car keeps going outwards. With an awd car, getting the rear end around can be easily done with a larger sway bar. However you do not want to induce to much over steer as then you will be throttle steering or sent into a drift. With the combination of a properly balanced front and rear sway bar, your car will handle turns much more neutrally and quickly. The sway bars are designed to stiffen up the chassis as well to reduce body roll. Some times called â...(choose a part on the right to read more)
General Fitment 911 2005-08
Pagid blue rs42 are from the rs line of all around racing brake pads. They are a medium friction coefficient racing compound with medium initial bite and good cold friction. Rs42 pads are manufactured of a low metallic resin bonded material containing steel and acrylic fibers. They operate in a wide operating temperature range and are very stable over that wide temperature range. Rs42 pads offer excellent pedal feel and inspire confidence in extreme braking situations. They offer lower disc wear rates and are fade resistant up to a temperature of 650*c (1,202*f). Applications include: vintage rally racing, formula racing and touring cars. Features at a glance: medium friction coefficient medium initial bite goo...(choose a part on the right to read more)
General Fitment 912 1965-69 911 1970-73 356 1960-65
From $192.92
Make a selection
We are proud to offer a wide assortment of OEM Porsche parts. Nobody knows more about your car, then its creators themselves. You dont have to question the build quality, attention to detail, or reliability of these. Why trust anyone else?
complete conversion kit, comes with a full set of ceramic rotors, yellow calipers, pads, and all other necessary hardware to convert your panamera turbo.
The pccb disc is made from a specially treated carbon fiber compound that is not only much harder than steel, but also more resistant to temperature. The discs are gripped by six-piston monobloc aluminum calipers at the front and four-piston units at the rear. The brakes are designed for both rapid deceleration ...(choose a part on the right to read more)
General Fitment PANAMERA 2010-14
$30,726.00
Make a selection
This seal sits above the rear most rocker panel section just in front of the rear wheel well. It seals the side skirt / rocker panel, part # FVD33398600 sold individually. Passenger's side fitment. For 964 turbo look / 965 turbo.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
View/Change Diagram
From $19.80
Make a selection
The automotive speed technologies 996 tt fresh air intake plenum and hard inlet pipe kit is designed to enhance the performance of your Porsche 996 tt by allowing fresh air to flow freely to the turbos for quick spool and additional power - very important for modified cars running larger than OEM turbos or running high boost. The system consists of the speedtech hi-flow intake plenum with 70mm outlet tubes, attached to 70mm molded hard plastic tubes for uniform high flow. Silicon hose is supplied to connect to the turbo inlets. The speedtech hi-flow plenum is designed to flow more air than the OEM plenum and deliver it quickly and smoothly with no restrictions from the maf tube all the way to the turbo inlets. ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$2,551.50
Make a selection
In the quest to create the most well balanced suspension for the 997 turbo, agency power has developed these sway bars to our specifications. The all wheel drive Porsche turbo cars naturally have a lot of under steer. Under steer is when you take a turn but your car keeps going outwards. With an awd car, getting the rear end around can be easily done with a larger sway bar. However you do not want to induce to much over steer as then you will be throttle steering or sent into a drift. With the combination of a properly balanced front and rear sway bar, your car will handle turns much more neutrally and quickly. The sway bars are designed to stiffen up the chassis as well to reduce body roll. Some times called â...(choose a part on the right to read more)
General Fitment 911 2005-08
Agency power is proud to release its new GT2rs inspired 1 piece monoblock wheel for the Porsche 996 and 997 widebody cars. The multi-spoke design features offset windows and uniquely designed curved elements to the center of the wheel. These wheels are only available in 19x8.5 and 19x12 and are sold as a set of 4.
The rear wheel offers a more aggressive concavity with an equally stunning front fitment. The front wheel weighs 21lbs where the rear weighs 24lbs. These wheels are built for a more aggressive look and fitment to truly sit flush with the fender wells. The wheels are designed to work with OEM lug bolts and do not require spacers. Each wheel includes your choice of ap engraved center cap color, or yo...(choose a part on the right to read more)
General Fitment 911 1998-05 911 TURBO/GT2 2001-05 911 2005-08
$4,250.95
Make a selection
"brombacher" 996 GT2 (lightweight version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- 4 x 3.5"(90mm/80mm) round tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power -...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$4,230.60
Make a selection
Facts:
- + 25 crank hp & + 19 crank torque
- 100-105 db sound level
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9 kg)
- 2 x 3.5"(90mm) titanium tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 6000rpm
Max. Torque - 620nm (457lbf ft) @ 1950-5000rpm
Max. Speed - 310km/h (193mph)
Max. Rpm -...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$9,909.90
Make a selection
Brombacher panamera® turbo 200 cell hjs ?hd? Tri-metal cats
- 10 crank hp & + 9 crank torque
- 2.5" tubing (63.5mm) straight through design for max. Power
- t 316 stainless steel for improved durability over t 304
- deeper tonal quality and louder volume which enhances 4.8 l turbo Porsche® sound
- no ecu (software) programming necessary.
- absolutely no drone in the cabin.
- will work with OEM exhaust components
- made in Germany
- can be used in conjunction with our primary muffler (bes 970 030 40s) and / or our sport muffler (bes 970 050 40s) and our tips (bes 970 060 40s) for more power and sound.
These catalytic converters are perfect for those who want to run sport cats without a softwa...(choose a part on the right to read more)
General Fitment PANAMERA 2010-14
From $4,337.30
Make a selection
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purchased seperately. They are "quad" 3.5"(90mm/80mm) tips and are made for this muffler. Kindly order bes 996 060 41s separately.
Figures:
Gen...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$4,947.80
Make a selection
"brombacher" 996 GT2 titanium exhaust system with 200 cells titanium tri-metal catalytics.
Facts:
- + 25 crank hp & + 19 crank torque
- 100-105 db sound level
- cat bypass
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9 kg)
- 2 x 3.5"(90mm) titanium tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 6000rpm
Max. Torque - 620nm (457lbf ft) @ 1950-500...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$11,144.10
Make a selection
Brombacher 997 tt (super sound version) stainless steel exhaust system
Facts:
- + 35 crank hp & + 25 crank torque (if pressure sensor is adjusted via software)**
- catalytic bypass
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purcha...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12 911 TURBO/GT2 2007-09
$2,117.50
Make a selection
Rubbing happens on some cars even with stock tires and the problem is very common with oversize tires/wheels.
Tire rubbing is an unsafe condition that will fail a tech inspection with many track clubs. Tire rub prevention kit solves the problem of tires rubbing the inner wheel well at full lock. This kit works by adjusting the full-lock position of the steering wheel, allowing you to prevent tires from rubbing. The kit is installed between the steering rack and the tie rods, both sides. Can be used on turbo and regular tie rods.
General Fitment 914 1970-76 911 1987-89 911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73 911 1965-69
Brombacher 997.2 tt "sport stock" (TUV version) muffler for OEM cats
Facts:
- + 6 crank hp & + 5 crank torque**
- reuses stock cats, perfect for those concerned about warranty.
- open muffler design for added power.
- tubing diameter is the same as the OEM system.
- weighs 19 lbs. (8,6 kg)
- t 316 stainless steel for improved durability over t 304.
- 3 on a scale of 1-10 in volume (1 being stock).
- includes cone and v band style hardware to prevent exhaust leaks.
- made in Germany.
- modular design for future 100 cell, 200 cell or bypass use.
- more distinguished growl at idle, partial throttle and wide open throttle.
- dme programming not necessary.
- reuses OEM tips.
**please note:the 99...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12
$2,805.00
Make a selection
Brombacher 997 tt (sound version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 36 lbs. (16.5 kg)
- t 316 stainless steel for improved durability over t 304
- 98db at idle and partial rpms, 100 db at wide open throttle
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock...(choose a part on the right to read more)
General Fitment 911 2005-08
$5,479.10
Make a selection
Brombacher 997 tt (TUV version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque (with FVD software)**
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purchased seperately. They are "quad" 3.5" (90/100mm) tips and ar...(choose a part on the right to read more)
General Fitment 911 2005-08
$5,230.50
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|