PORSCHE CAYENNE TURBO EHS
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Brombacher 997 tt (super sound version) stainless steel exhaust system
Facts:
- + 35 crank hp & + 25 crank torque (if pressure sensor is adjusted via software)**
- catalytic bypass
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purcha...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12 911 TURBO/GT2 2007-09
$2,117.50
Make a selection
No need for Porsche sport exhaust (pse) envy with this muffler! This offers weight savings and a far more exotic sound than the pse, all without drone. It is the perfect compromise for you and your loved ones. Rich, deep, turbo motorsport tones with the valves open and soft subtle, completely stock sounds with them closed. Top of the line or range depending on the english and is the best choice for a daily driver. Features: - + 16 crank hp & + 15 crank torque. - weighs 37 lbs. (17 kg) - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - direct bolt on replacement for the factory center muffler. - includes necessary installation hardware. - reduces turbo lag, backpressure and thermal lo...(choose a part on the right to read more)
$4,651.90
Make a selection
The perfect compromise for you and your loved ones. Rich, deep race car tones with the valves open and soft subtle, completely stock sounds with them closed. Torque is better than our other systems in the low range with the valves closed and horsepower is better with the valves open. Made for mid-range and top end performance with the added beauty of 3.5" (90mm) dual exhaust tips! + 27 crank hp & +25 crank torque (on average). - 2.9 tubing (75 mm) at the widest point. Primaries are 2.5" (64mm). - 200 cell hjs "hf" trimetallic catalytic converters. - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - 3.5" (90 mm) dual oval, double walled polished tips included. - dual high quality ...(choose a part on the right to read more)
General Fitment 911 1994-98
From $11,730.62
Make a selection
"brombacher" 996 GT2 (lightweight version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- 4 x 3.5"(90mm/80mm) round tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power -...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$4,230.60
Make a selection
"brombacher" 996 GT2 titanium exhaust system with 200 cells titanium tri-metal catalytics.
Facts:
- + 25 crank hp & + 19 crank torque
- 100-105 db sound level
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9 kg)
- 2 x 3.5"(90mm) titanium tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 60...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$9,835.10
Make a selection
Quiet version with catalytic bypass and 4x80mm end tips these versions of FVD sport exhaust system is specifically made for increased performance vehicles. Designed for tolerable, pleasant and sonorous sound (especially for the turbo cabriolet). The elimination of the catalysts reduced drastically the back pressure and increases the performance and throttle response to the max! - stainless steel exhaust system - catalytic bypass - 4x80mm end tips - 2 3/4 tubing (70mm) straight through design for maximum power - weighs 39 lbs. (18,1 kg) - made in Germany - dme programming necessary (catalytic adaption) - stock tips will fit. Tech tip: order also repair / gasket set FVD mk9 970 02
This item may need to be sour...(choose a part on the right to read more)
$2,928.20
Make a selection
"brombacher" 997 tt (sound version) titanium 4 chamber exhaust system
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts with titanium outer shell
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9kg)!
For comparison the stainless version weighs 51 lbs. (23 kg)
- 1000 degree celcius, high grade titanium material
- 4 x 3.25"(80mm) round tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary...(choose a part on the right to read more)
General Fitment 911 2005-08
$12,320.00
Make a selection
Brombacher 997.2 tt "cat-back" (sound version) muffler for OEM cats
Facts:
- up to 25 crank hp & + 25 crank torque**
- reuses stock cats, perfect for those concerned about warranty.
- open muffler design for added power.
- tubing diameter is the same as the OEM system.
- weighs 19 lbs. (8,6 kg)
- t 316 stainless steel for improved durability over t 304.
- 5 on a scale of 1-10 in volume (1 being stock).
- includes cone and v band style hardware to prevent exhaust leaks.
- made in Germany.
- modular design for future 100 cell, 200 cell or bypass use.
- more distinguished growl at idle, partial throttle and wide open throttle.
- dme programming not necessary.
- reuses OEM tips.
**please note:t...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12
$2,805.00
Make a selection
Brombacher 997.2 tt "sport stock" (TUV version) muffler for OEM cats
Facts:
- + 6 crank hp & + 5 crank torque**
- reuses stock cats, perfect for those concerned about warranty.
- open muffler design for added power.
- tubing diameter is the same as the OEM system.
- weighs 19 lbs. (8,6 kg)
- t 316 stainless steel for improved durability over t 304.
- 3 on a scale of 1-10 in volume (1 being stock).
- includes cone and v band style hardware to prevent exhaust leaks.
- made in Germany.
- modular design for future 100 cell, 200 cell or bypass use.
- more distinguished growl at idle, partial throttle and wide open throttle.
- dme programming not necessary.
- reuses OEM tips.
**please note:the 99...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12
$2,805.00
Make a selection
"brombacher" titanium exhausts are the absolute last word in exhausts for the 997 GT2-rs.
Incredible performance and aggressive sound all in a lightweight titanium system. The system as shown increases performance 25hp and weighs just 25.5 lbs for a huge weight savings in the already heavy rear of the 911.
From the turbo flanges and catalytics (available in 100 or 200 cells), to the tailpipes (Ø 2x85mm), this entire exhaust system (excluding the cells themselves) is made entirely of titanium. The 4 chamber system design reduces the drone in the cabin while retaining a deep, throaty growl unlike other 2 chamber systems from the competition. Our system is designed using the most expensive and highest he...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $10,703.00
Make a selection
Vehicles which were delivered without the Porsche® sport exhaust (pse) will need this kit for installation. It includes all of the vacuum lines and electronics needed to upgrade your exhaust to a valved system.
What?s in the box:
- electronic control module.
- wiring harness.
- vacuum valve and vacuum lines.
- vacuum box with support.
- open / closed button.
- mounting hardware.
Fits: GT2 rs, 3.6l, 456kw (11-), GT2 (08-09), turbo (07-09), speedster, 3.8l, 300kw (10-), Carrera GTS4, 300kw (12-), Carrera GTS2, Carrera 4s, 283kw (09-), Carrera 4, 254kw (09-), Carrera s, Carrera, 261kw (05-08), 239kw (05-08), GT3 r/rs (99-03), GT3-cup (98-04), GT3 rs (04-), GT3 04-05 (04-05), GT3 99-01 (99-01), GT2 (0...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09 911 2009-12 911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05 911 1994-98 CAYMAN 2009-12 CAYMAN 2006-08 BOXSTER 2009-11 BOXSTER 2005-08
From $842.70
Make a selection
This comprehensive book is dedicated to the revolutionary Porsche 911s built between 1989 and 1994, known to aficionados and factory insiders as auftragsnummer 964 (project number 964). Porsche 911 enthusiast's companion™ covers Carrera 2, Carrera 4, and turbo models from 1989 to 1994. Whether you're a 964 owner, a prospective buyer, or a Porsche workshop technician looking for 964 information, this is an invaluable addition to your technical library.
General Fitment ACCESSORY 911 1989-94
Ksport procomp front big brake kit 16 in. Rotor 8 piston caliper Porsche 996 twin turbo 99-04
Ksport big brake kits provide the ultimate in stopping power for your vehicle. Integrating new brake technology into the design of the kits allows for a kit that highly reduces brake fade and continually cools and refreshes the brake pads surface under braking. These brake systems are designed for easy installation with minimal tools required (in most applications).
Ksports extreme lightweight caliper comes in differential bore configuration. It is machined from aircraft quality billet, weighs just over 5lbs. Each, and has machined in protection grooves for the bridge tubes. Aluminum pistons, high temperat...(choose a part on the right to read more)
General Fitment 911 1998-05
$4,873.50
Make a selection
B&b header 1 3/4 inch Porsche 944 turbo 85-89
Since 1989 billy boat performance exhaust has designed, tested, and manufactured the highest quality stainless steel exhaust systems available. Today in its state-of-the-art facility, billy boat continues to develop the highest performing exhaust systems for most sports cars, trucks, and suvs. With an in-house dyno facility and r&d staff, they stay on top of current vehicle trends and deliver products that fit and perform to an unsurpassed level of standards.
Features:
Makes 8hp to the rear wheels.
Features 4-2-1 design for optimal flow using 1 3/4 piping.
Completely stainless steel
Mandrel bending
Tig welding.
This product is made to o...(choose a part on the right to read more)
General Fitment 944 1985-88
$1,633.78
Make a selection
Billy boat's newly designed mufflers are hand built with high quality materials to give you years of performance for your Porsche c2/4 and Porsche 3.6l turbo. All of their mufflers are constructed with t304 stainless steel with radiused end-plates, and gussetted joints for superior strength. Twin inlet mufflers, designed specifically for b&b headers, have a special slip-joint absorbing expansion and contraction during times of severe heat. Special race and street applications for your Porsche c2/4 are available with your choice of tips styles. Billy boat performance exhaust has a deep commitment to build quality products. With over 3 generations of fabrication and racing experience going into the development o...(choose a part on the right to read more)
General Fitment 911 1989-94
$4,926.20
Make a selection
Their newly designed mufflers are hand built with high quality materials to give you years of performance for your Porsche c2/4 and Porsche 3.6l turbo. All of their mufflers are constructed with t304 stainless steel with radiused end-plates, and gussetted joints for superior strength. Twin inlet mufflers, designed specifically for b&b headers, have a special slip-joint absorbing expansion and contraction during times of severe heat. Special race and street applications for your Porsche c2/4 are available with your choice of tips styles. Billy boat performance exhaust has a deep commitment to build quality products. With over 3 generations of fabrication and racing experience going into the development of every ...(choose a part on the right to read more)
General Fitment 911 1989-94
$3,813.08
Make a selection
Product details:
Great sports car sound with increased power and significant reduction in turbo lag
Features:
-fits all Porsche 911 turbo 930 vehicles (1976-1989)
-adds 15 whp for improved throttle response
-improved sports car sound with a much deeper, more aggressive exhaust note
-constructed with 3.0" 14-16 gauge t304l c.n.c. Mandrel bent stainless steel tubing for maximum performance and durability
-maxflo mufflers are radius stress relieved, hydro-formed cases that are pulse tig welded with 2000 degree ceramic fiber and stainless steel wool packing.
-available in single or dual outlet configuration
...(choose a part on the right to read more)
General Fitment 930 1975-77 911 1978-83 911 1984-86 911 1987-89
From $1,295.00
Make a selection
Product details:
Great sports car sound with increased power and significant reduction in turbo lag
Features:
-fits all Porsche 911 turbo 930 vehicles (1976-1989)
-adds 15 whp for improved throttle response
-improved sports car sound with a much deeper, more aggressive exhaust note
-constructed with 3.0" 14-16 gauge t304l c.n.c. Mandrel bent stainless steel tubing for maximum performance and durability
-maxflo mufflers are radius stress relieved, hydro-formed cases that are pulse tig welded with 2000 degree ceramic fiber and stainless steel wool packing.
-available in single or dual outlet configuration
...(choose a part on the right to read more)
General Fitment 930 1975-77 911 1978-83 911 1984-86 911 1987-89
From $1,995.00
Make a selection
Product details:
Dramatically improve sports car sound and throttle response with upgraded maxflo mufflers and inlet tubing; includes deluxe outlet tip
Features:
-fits all Porsche 944 turbo 951 vehicles (1985-1991)
-increases horsepower and torque by 26 whp and 29 ft-lbs
-saves 20 lbs from factory muffler system
-constructed from high quality 14-16 gauge cnc mandrel-bent t304 stainless steel for maximum performance and durability
-noticeable improvement in sports car sound and throttle response
-direct replacement for the OEM muffler with no cutting or welding required
-all fabspeed performance products are backed by the fabspeed lifetime lim...(choose a part on the right to read more)
General Fitment 944 1985-88 944 1989-91
$1,490.35
Make a selection
Product details:
Direct replacement for restrictive factory headers; optimized for increased flow and quicker turbo spool
Features:
-fits all 911 turbo 930 vehicles (1976-1989)
-improves power delivery much sooner in the rpm range compared tot he restrictive OEM heat exchangers
-constructed from 14-16 gauge, c.n.c. Mandrel bent t304 stainless steel with high velocity 3-in-1 pyramidal investment cast merge collector for improved exhaust scavenging.
-this system will include a drip accumulator with double swivels and aeroquip lines with adapters and a graphite steel layered gasket for the drip accumulator.
-7/8” ...(choose a part on the right to read more)
General Fitment 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89 911 1989-94
$3,136.25
Make a selection
Product details:
Increase exhaust flow from the headers to the mufflers and improving power and sound by replacing the catalytic converters with straight-through pipes
Features:
-fits all Porsche 944 turbo 951 vehicles (1985-1991)
-increases horsepower and torque by 26 whp and 29 ft-lbs
-constructed from cnc mandrel-bent t304l stainless steel
-direct replacement for the factory catalytic converters
-bolt-on installation
-all fabspeed performance products are backed by the fabspeed lifetime limited warranty
General Fitment 944 1985-88 944 1989-91
Product details:
High-performance turbo discharge pipe replaces the failure-prone factory pipe that often collapses and restricts exhaust flow.
Features:
-fits all Porsche 944 turbo 951 vehicles (1985-1991)
-replacement high-performance turbo discharge pipe - replaces failure prone restrictive double walled factory OEM pipe that can collapse and restrict flow
-2.75” 70 mm t304l stainless steel - versus much smaller OEM double walled tube
-precision machined flanges and tig welded construction
-gaskets and hardware included
-polished stainless steel finish
-simple bolt-on installation
-all fabspeed performa...(choose a part on the right to read more)
General Fitment 944 1985-88 944 1989-91
Product details:
Bolts to the factory secondary muffler and eliminates the restrictive catalytic converter for increased flow and power
Features:
-fits all 964 turbo 965 vehicles (1990-1994)
-great sports car sound without being too loud
-3.0" tubing for maximum flow
-constructed from high-quality 14-16 gauge c.n.c. Mandrel-bent t304l stainless steel for optimum flow and maximum durability
-direct bolt-on installation
-all fabspeed performance products are backed by the fabspeed lifetime limited warranty
-optional 02 spacers available to minimize c.e.l occurrences
General Fitment 911 1989-94
Product details:
This product takes 2-3 weeks to fabricate.
Direct bolt-on replacement upgrade for the factory exhaust tips; improves flow and enhances the vehicle's aesthetic
Features:
-fits all Porsche 964 turbo 965 vehicles (1990-1994)
-improves exhaust flow and sound by replacing the restrictive factory tips (pictured here) with a clean straight-through design
-angle-cut 4.5" oval shape
-polished to a mirror finish
-constructed from high-quality 14-16 gauge c.n.c. Mandrel-bent t304l stainless steel
-simple diy bolt-on installation
-all fabspeed performance products are backed by the fabspeed lifetime ...(choose a part on the right to read more)
General Fitment 911 1989-94
Product details:
Replaces the factory secondary muffler for improved flow and increased sound
Features:
-fits all Porsche 964 turbo 965 vehicles (1990-1994)
-increase in power and throttle response throughout the rpm range.
-saves 19 lbs from the rear of the vehicle
-more aggressive tone compared to the maxflo muffler system
-non-muffled aggressive exhaust note
-constructed from 14-16 gauge, t304l c.n.c. Mandrel bent stainless steel
-direct replacement for the OEM secondary muffler
-simple diy installation in less than 1 hour
-all fabspeed performance products are backed by the fabspeed life...(choose a part on the right to read more)
General Fitment 911 1989-94
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|