PORSCHE 993 CHECK ENGINE
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
968/968cs: there must be cut out a part of the alu-cover on top of the engine. Please take a look at the pictures.
Fits: 968cs (93-95), there must be cut out a part of the alu-cover on top of the engine. Please take a look at the pictures.(only 968/968cs), 968 (92-95), turbos (88-91), turbo (86-88), 944cup (86-89), 944s2 (89-91), 944s (87-88), 944 (82-89)
Please note: on 968 and 968 clubsport models the engine cover must modified for clearance purposes. Please see our pictures.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 968 1992-95
Every piston and cylinder is complete and ready to be installed. They are packed as complete set for every engine. Carefully read our technical information before installing the parts. Piston rings and piston pins must not be modified. Modifications of any of these parts will void the manufacturers warranty.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1978-83 911 1984-86 911 1987-89 911 1989-94
$8,799.12
Make a selection
Having problems with your check engine light? Want to run cat bypass pipes or a free flowing sports catalyst set up on your vehicle without having to reprogram the dme (ecu)? This adapter offsets the oxygen sensor about 1.5 inch from the gas stream. This achieves, in most cases, a sufficient measurement for the air/co ratio and increases the tolerance range between the pre and post cat oxygen sensors. In addition, the sensitivity of the oxygen sensor is also reduced allowing you to run a nearly any exhaust or catalytic set up, including bypass pipes, without the need to reprogram your ecu! Use only for the 2nd oxygen sensor (after catalytic)!
This item may need to be sourced from Germany and would take 2-4 w...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04 911 GT3 2007-11 911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05 911 1989-94 911 1987-89 911 1984-86 911 1978-83 CAYENNE 2007-10 CAYENNE 2003-06 CAYMAN 2006-08 BOXSTER 2005-08 968 1992-95 944 1982-85 944 1985-88 944 1989-91 928 1992-95 928 1987-91 928 1983-86 924 1986-88 924 1980-85 911 1994-98
Sport catalytic bypass- fits both bischoff and gillet systems
Improve sound and performance by decreasing exhaust backpressure.
An ecu upgrade will be necessary to avoid a check engine light.
If you have a u.s. Model, please note: this part will only work on u.s. 1995 obd 1 cars. This will not work on u.s. Spec cars from 1996 upwards as they are obd ii. Please verify if your 993 is a obd i or obd ii car prior to ordering.
General Fitment 911 1994-98
FVD "brombacher" sound version exhaust system for 964 89-94
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 66 lbs. (29,9 kg)
- t 316 stainless steel for improved durability over t 304
- 2 x 3.5"(90mm) oval tips
- includes flexible heating tube
- made in Germany
- no dme programming necessary. No check engine light.
- intoxicating growl at idle, partial throttle and wide open throttle.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quali...(choose a part on the right to read more)
General Fitment 911 1989-94
$7,854.00
Make a selection
2 required. One to reference the position of the crankshaft and the other to measure the speed. if either of these fail, the engine will have no spark. easily checked with a sensitive volt meter set to ac current, each device will generate 2.5 volts as the engine is cranked. often these are bent after a clutch is replaced or the plug broken from heat brittleness.
Known as: pulse sender
View/Change Diagram
From $46.00
Make a selection
The passenger side is the first to go as it is nearest the exhaust manifold. if your engine vibrates at idle and smoothes out when revved this is probably the culprit. you may also check to see if the two mounting bolts are intruding into the rubber of the mount. Easily replaced just by dropping the cross member, order two and get it over with! Sold each.
View/Change Diagram
From $60.00
Make a selection
FVD "brombacher" titan sound version exhaust system for 964 89-94
- + 25 crank hp & + 19 crank torque
- 100 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 42 lbs. (19,3 kg)
- material: titan
- 2 x 3.5"(90mm) oval tips
- includes flexible heating tube
- made in Germany
- no dme programming necessary. No check engine light.
- intoxicating growl at idle, partial throttle and wide open throttle.
Brombacher mufflers outer shell dampens and eliminates unwanted frequencies and ensures no resonance or drone in the cabin. The end result is a strong, linear, firing-order dominated flat-6 PorscheĀ® sound. In addition, bromb...(choose a part on the right to read more)
General Fitment 911 1989-94
From $21,479.70
Make a selection
Improve sound and performance by decreasing exhaust backpressure with our catalytic bypass kit. - + 18 crank hp & + 13 crank torque. - weighs 28 lbs. (13 kg). - t 304 stainless steel. - made in europe. - reduces thermal load on the heads. We recommend purchasing one our prepackaged installation kits, part # FVDmk993301 please note: cat bypass pipes are not c.a.r.b. Certified (california) and are for racing use only. FVD is not responsible for emissions compliance. Engine management software must be updated to avoid a check engine light, purchase part # FVD99361891 or FVD99361890.
General Fitment 911 1994-98
$3,371.18
Make a selection
FVD "brombacher" sound version exhaust system for 964 89-94
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 66 lbs. (29,9 kg)
- t 316 stainless steel for improved durability over t 304
- 1 x 3.5"(90mm) oval tip
- includes flexible heating tube
- made in Germany
- no dme programming necessary. No check engine light.
- intoxicating growl at idle, partial throttle and wide open throttle.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled qualit...(choose a part on the right to read more)
General Fitment 911 1989-94
$8,518.40
Make a selection
Product details:
Complete high-performance exhaust solution for the Porsche 993 turbo; fantastically daily drivable sound and power from fabspeed's supercup exhaust system, sportcat x-pipe, sport headers with heat, cup high performance air box cover, bmc f1 air filter and ecu tuning upgrade.
Includes:
993 turbo supercup exhaust system incl. Deluxe oval style tips
993 turbo sport cat x-pipe
993 turbo sport headers with heat
993 turbo cup high performance air box cover
993 turbo bmc f1 air filter
993 turbo ecu tuning upgrade
Features:
-fits all Porsche 993 turbo / turbo s vehicles (1995-1998)
-constructed from t304 stainless steel, c.n.c. Mandrel bent tubing for maxim...(choose a part on the right to read more)
General Fitment 911 1994-98
From $7,750.00
Make a selection
Kit includes:
Sport-motronic dme exch., power-flow kit
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 8,5:1
Max. Power - 300kw (408hp) @ 5750rpm
Max. Torque - 540nm (398lbf ft) @ 4500rpm
Max. Speed - 290km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 4.5s
Tuning:
Max. Power - 324kw (440hp) @ 6000rpm
Max. Torque - 600nm (443lbf ft) @ 4500rpm
Max. Speed - 310km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 4.3s
FVD dme / ecu programming philosophy:
For more than 20 years, FVD-Brombacherhas been setting the standard for Porsche engine management software tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in h...(choose a part on the right to read more)
General Fitment 911 1994-98
$2,194.50
Make a selection
The h11 bolt (wmc7 and wmc6) is a high quality, aircraft standard fastener. Under racing conditions, we suggest that the h11 bolts be changed periodically.
All bolts should be lubricated under the heads as well as on the threads. We recommend the bolt lube supplied with the rods, or as an alternative, a molybdenum base paste mixed with engine oil.
The preferred method to torque the bolt is by using the stretch figure 60,75 nm (3/8 sps - wmc6 9,65mm).
Fitment:
Gt2 (01-05) / turbo (01-05) / GT2 (96-98) / turbo (95-98) / cup-race (94-98) / rsr (96-97) / rs (95-96) /
C4s (96-98) / c4 (95-98) / c2s (96-98) / c2 (94-98) / 968cs (93-95) / 968 (92-95) / turbo 3.6 (93-94) / turbo 3.3 (91-92) / cup-race (90-93) ...(choose a part on the right to read more)
General Fitment 944 1982-85 944 1985-88 944 1989-91 911 TURBO/GT2 2001-05 911 1994-98 968 1992-95 911 1989-94 911 1987-89 911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73 911 1965-69
Plug n play mass air flow system
No engine modifications, easy instalation.
Power increase up to 36 kw (50 ps).
Kit includes:
Air flow meter, tuning-chip, air temperaturesensor, modified airbox, K&N airfilter, sport catalytic.
Requires 98 octane in europe
Requires 93 octane in the u.s.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1989-94
$3,869.80
Make a selection
Plug n play mass air flow system
No engine modifications, easy instalation.
Power increase up to 36 kw (50 ps).
Kit includes:
Air flow meter, tuning-chip, air temperaturesensor, sport-airfilter, sport catalytic.
Requires 98 octane in europe
Requires 93 octane in the u.s.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1989-94
$3,088.80
Make a selection
No engine modifications, easy installation.
Power increase up to 36 kw (50 ps).
In order to gain the full 50ps you must use a 100 cell sport cat or cat bypass in conjunction with a cup pipe or dual sport exhaust.
Kit includes:
Air flow meter, FVD tuning-chip, air temperature sensor, modified airbox, K&N airfilter.
Requires 98 octane in europe
Requires 93 octane in the u.s.
Kindly provide the Bosch number and the Porsche number off of the control unit in order to purchase.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1989-94
$2,769.80
Make a selection
Stock:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 8,5:1
Max. Power - 300kw (408hp) @ 5750rpm
Max. Torque - 540nm (398lbf ft) @ 4500rpm
Max. Speed - 290km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 4.5s
Software tuning:
Max. Power - 324kw (440hp) @ 6000rpm
Max. Torque - 600nm (443lbf ft) @ 4500rpm
Max. Speed - 310km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 4.3s
Highlights:
- software performs flawlessly on your 95' and 96' model year ecu's ! So you don't have to purchase 97' and newer ecu's which are extremely expensive!
- all of the factory engine software safety features are fully intact
- customizable for your needs (intakes, lightweight fly...(choose a part on the right to read more)
General Fitment 911 1994-98
$3,294.50
Make a selection
Plug n play mass air flow system
No engine modifications, easy installation.
Power increase up to 36 kw (50 ps).
In order to gain the full 50ps you must use a 100 cell sport cat or cat bypass in conjunction with a cup pipe or dual sport exhaust.
Gains with strictly lbii kit are 25-30 ps
Kit includes:
Air flow meter, FVD tuning-chip, air temperature sensor, modified airbox, K&N airfilter.
Requires 98 octane in europe
Requires 93 octane in the u.s.
Kindly provide the Bosch number and the Porsche number off of the control unit in order to purchase.
Please note the race version is for race use only and is not recommended for the street.
This item may need to be sourced from Germany and would ta...(choose a part on the right to read more)
General Fitment 911 1989-94
$1,988.80
Make a selection
Replace your restrictive air box and filter with a powerflow kit for improved air volume and velocity, and increased horsepower. A better breathing engine also gives you faster throttle response. Each design has been flow bench and engine dyno tested to assure maximum performance. Powerflow kits include the powerflow intake unit, lifetime air filter, instructions, and all hardware.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1994-98
Replace your restrictive air box and filter with a powerflow kit for improved air volume and velocity, and increased horsepower. A better breathing engine also gives you faster throttle response. Each design has been flow bench and engine dyno tested to assure maximum performance. Powerflow kits include the powerflow intake unit, lifetime air filter, instructions, and all hardware.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1994-98
Power gains: + 15 hp & + 13 lb. Ft of torque
Highlights:
- software performs flawlessly on your 96' model year ecu's ! So you don't have to purchase 97' and newer ecu's which are extremely expensive!
- all of the factory engine software safety features are fully intact
- customizable for your needs (intakes, lightweight flywheels, bypass - 100 cell - 200 cell exhausts, etc.)
- customizable for octane (please let us know what octane you are running example: europe 98, us 91 or 93)
Please note:
You will need to give us the Bosch number and Porsche number off of the ecu prior to sending the ecu to us to ensure what control unit you have. The reason is 1996 model year ecu eprom's could only be fl...(choose a part on the right to read more)
General Fitment 911 1994-98
$2,194.50
Make a selection
Replace your restrictive air box and filter with a powerflow kit for improved air volume and velocity, and increased horsepower. A better breathing engine also gives you faster throttle response. Each design has been flow bench and engine dyno tested to assure maximum performance. Powerflow kits include the powerflow intake unit, lifetime air filter, instructions, and all hardware.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1994-98
Power gains: + 15 hp & + 13 lb. Ft of torque
Highlights:
- all of the factory engine software safety features are fully intact
- customizable for your needs (intakes, lightweight flywheels, bypass - 100 cell - 200 cell exhausts, etc.)
- customizable for octane (please let us know what octane you are running example: europe 98, us 91 or 93)
Please note:
For 1996 model year Porsches please see our part number FVD 993 618 71. You will need to give us the Bosch number and Porsche number off of the ecu prior to sending the ecu to us. The reason is 1996 model year ecu eprom's could only be flash loaded with software one time. To program these units requires the use of a coding socket. A late model ecu (1...(choose a part on the right to read more)
General Fitment 911 1994-98
$1,094.50
Make a selection
Kit includes:
Sport-motronic dme exch., power-flow kit, 5.0bar fuel presure reg., turbocharger k24/26 l/r, sport camshaft l/r, mechanical rockerarm kit, sprocket wheels modification kit, piston & cylinder 3.8l.
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 8,5:1
Max. Power - 300kw (408hp) @ 5750rpm
Max. Torque - 540nm (398lbf ft) @ 4500rpm
Max. Speed - 290km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 4.5s
Tuning:
Max. Power - 404kw (550hp) @ 6000rpm
Max. Torque - 750nm (553lbf ft) @ 4500rpm
Max. Speed - 331km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 3.7s
*power with 550hp only with sport catalytic set(210 111 993 10), secondary oil coller...(choose a part on the right to read more)
General Fitment 911 1994-98
$36,292.30
Make a selection
Porsche automobiles have always been know as state-of-the-art, and often are seen as difficult to work on and diagnose is a way to diagnose your Porsche just like the factory-trained technician does at the dealership! The dure by non-technicians and owners alike. Now therametric diagnostic tool is a software suite that installs on your pc laptop and hook to your car's data port and can read and communicate with the Porsche dme. It allows you to reset service reminders, read and reset diagnostic trouble codes, display and log actual values in real time, and turn off the check engine and airbag lights (and tell you why they are on in the first place). The durametric diagnostic tool can communicate with the engin...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04 911 1998-05 BOXSTER 2005-08 CAYMAN 2006-08 944 1989-91 968 1992-95 911 1989-94 911 1994-98 911 TURBO/GT2 2001-05 911 GT3 2003-05 911 2005-08 911 GT3 2007-11 CAYENNE 2003-06
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|