PORSCHE 997 TURBO CAT BACK
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
FVD Brombacher997.1 tt ?700 series? Upgraded turbos
Facts:
- cnc re-profiled compressor housing and backing plate
- new, lightened and larger compressor wheel (12 blades)
- reworked turbine wheel, lightened and optimized for higher flow and reduced backpressure.
- all new bearings.
- all new piston rings and seals.
- all parts cleaned, inspected and measured to motorsport specifications.
- all parts are balanced (static & dynamic) up to 120.000 rpm with balancing protocol.
- 47.55 mm inducer
- 66 mm exducer
- flow rate = 37 lbs. / minute or 280g/s
- remanufactured by borg warner certified technicians
- shaft tolerances are strictly maintained to ensure durability
- free software update for tho...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$5,860.38
Make a selection
Kit includes:
Software dme exch., sport air filter
Please note: this dme cannot be flashloaded. Dme must be sent to us.
Genuine:
Engine - 6 cylinder boxer
Capacity - 2480ccm
Compression ratio - 11,0:1
Max. Power - 150kw (204hp) @ 6000rpm
Max. Torque - 245nm (181lbf ft) @ 4500rpm
Max. Speed - 240km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 6.9s
Tuning:
Max. Power - 158kw (215hp) @ 6000rpm
Max. Torque - 260nm (192lbf ft) @ 4500rpm
Max. Speed - 247km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 6.7s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our en...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,053.80
Make a selection
Kit includes:
Software dme, power-flow kit, sport header system, sportmuffler.
Please note: this dme cannot be flashloaded. Dme must be sent to us.
Some models require oxygen sensor relocation.
Genuine:
Engine - 6 cylinder boxer
Capacity - 2480ccm
Compression ratio - 11,0:1
Max. Power - 150kw (204hp) @ 6000rpm
Max. Torque - 245nm (181lbf ft) @ 4500rpm
Max. Speed - 240km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 6.9s
Tuning:
Max. Power - 169kw (230hp) @ 6000rpm
Max. Torque - 280nm (207lbf ft) @ 5500rpm
Max. Speed - 255km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 6.4s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. ...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$4,261.40
Make a selection
Kit includes:
Software dme, sport air filter, sport header system.
Some models require oxygen sensor relocation.
Please note: this dme cannot be flashloaded. Dme must be sent to us.
Genuine:
Engine - 6 cylinder boxer
Capacity - 2480ccm
Compression ratio - 11,0:1
Max. Power - 150kw (204hp) @ 6000rpm
Max. Torque - 245nm (181lbf ft) @ 4500rpm
Max. Speed - 240km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 6.9s
Tuning:
Max. Power - 162kw (220hp) @ 6000rpm
Max. Torque - 270nm (199lbf ft) @ 5500rpm
Max. Speed - 251km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 6.6s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep u...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,747.90
Make a selection
Kit includes:
Software ecu software (flashclient cable) and sport air filter
Genuine:
Engine - 6 cylinder boxer
Capacity - 3179ccm
Compression ratio - 11,0:1
Max. Power - 185kw (252hp) @ 6250rpm
Max. Torque - 305nm (225lbf ft) @ 4500rpm
Max. Speed - 260km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 5.6s
Tuning:
Max. Power - 195kw (265hp) @ 6400rpm
Max. Torque - 325nm (240lbf ft) @ 4900rpm
Max. Speed - 267km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 5.4s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we ...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,053.80
Make a selection
Kit includes:
Software ecu software (flashclient cable), sport air filter and sport header system.
Some models require oxygen sensor relocation.
Genuine:
Engine - 6 cylinder boxer
Capacity - 3179ccm
Compression ratio - 11,0:1
Max. Power - 185kw (252hp) @ 6250rpm
Max. Torque - 305nm (225lbf ft) @ 4500rpm
Max. Speed - 260km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 5.6s
Tuning:
Max. Power - 200kw (272hp) @ 6400rpm
Max. Torque - 335nm (247lbf ft) @ 4900rpm
Max. Speed - 270km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 5.3s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche eng...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,747.90
Make a selection
Genuine:
Engine - 6 cylinder boxer
Capacity - 2480ccm
Compression ratio - 11,0:1
Max. Power - 150kw (204hp) @ 6000rpm
Max. Torque - 245nm (181lbf ft) @ 4500rpm
Max. Speed - 240km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 6.9s
Tuning:
Max. Power - 158kw (215hp) @ 6000rpm
Max. Torque - 260nm (192lbf ft) @ 4500rpm
Max. Speed - 247km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 6.7s
Please note: this dme cannot be flashloaded. Dme must be sent to us.
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfec...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,094.50
Make a selection
The clutch masters fx100 system uses the power plus i pressure plate with a custom heavy-duty steel back organic friction disc. Sprung disks can be used with the OEM flywheel or aftermarket lightweight flywheels. This clutch is engineered for heavy-duty street use and is specifically designed for extended wear and additional clamping force for the enthusiast who has added an exhaust system, an intake system, up to 50hp no2 upgrade, or other non-forced induction external bolt-ons.
Featuring only slightly increased pedal pressure, longer life than stock, and normal clutch feel during engagement and disengagement for a very smooth operation.
The clutch masters fx100 system:
High performance str...(choose a part on the right to read more)
General Fitment 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 TURBO/GT2 2007-09
$2,238.03
Make a selection
Stoptech recognizes that great brakes need to look as good as they perform. Performance wheels and tires are best complemented with stoptech sportstop cross-drilled or drilled+slotted rotors.every sportstop brake rotor is produced from a high quality centric parts blank casting and finished in a durable e-coating for corrosion resistance. Sportstop drilled and slotted brake rotors (prefix 127) prevent glazing of the pads, add bite and improve wet and dry braking performance.every sportstop rotor is finished with black e-coating on both sides of the hat, inside the the cooling vanes, and on the outside edge. E-coating is a superior electro-statically applied finish designed to withstand 400 hours of salt water e...(choose a part on the right to read more)
General Fitment 911 1984-86 911 1987-89 911 1989-94
K24/26 exchange turbo (only OEM k24 exchange accepted)
(up to 700 hp)
Power is focused on mid and top range rpm?s.
Facts:
- modified compressor housing and backing plate
- modified & lightened high flow compressor wheels.
- remanufactured by kkk / borg warner certified technicians
- free software update for those already running FVD software.
FVD brombachers 996 k24/26 race turbos are new units created for those who are looking for ultimate in performance. Power is focused in the mid and top rpm range while keeping turbo lag low. They are completely bolt on and do not require custom headers or special modifications.
The factory OEM turbocharger compressor housing is re-profiled and the compr...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$2,506.75
Make a selection
Our exhaust products are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. Our entire "brombacher" line of exhausts is manufactured by m&m exhaust, gmbh in Germany who is no stranger to Porsche racing exhausts. Each is tested comprehensively for flow rate, thermal stress, resistance to cracking, and longevity. To further ensure quality, the exhaust material (t 316 stainless) meets the standards of the German independent testing agency TUV; whose quality standards are among some of the strictest in the world. - + 10 crank hp & +6 crank torque. - 100 cell, tri metallic German hjs sport catalysts. - large volume high flow cat. - exhaust hange...(choose a part on the right to read more)
General Fitment 911 1989-94
From $1,500.82
Make a selection
Our exhaust products are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. Our entire "brombacher" line of exhausts is manufactured by m&m exhaust, gmbh in Germany who is no stranger to Porsche racing exhausts. Each is tested comprehensively for flow rate, thermal stress, resistance to cracking, and longevity. To further ensure quality, the exhaust material (t 316 stainless) meets the standards of the German independent testing agency TUV; whose quality standards are among some of the strictest in the world. - + 10 crank hp & +6 crank torque. - 200 cell, tri metallic German hjs sport catalysts. - large volume high flow cat. - exhaust hange...(choose a part on the right to read more)
General Fitment 911 1989-94
From $1,675.37
Make a selection
This exhaust system is engineered for the discerning Porsche 965 turbo owner who is interested in pure unbridled power and sound. It is hand made from t 321 grade stainless steel. All piping is mandrel bent and the collector is a 41 mm (1 5/8 inch) diameter for reduced backpressure and increased performance. The sport muffler exudes a lower, deeper linear-firing-order dominated flat 6 Porsche turbo sound with added turbo whistle. Exhaust tips are 101 mm (4 inch) polished ovals with a rolled lip. Each kit includes complete installation hardware, gaskets, wastegate pipe, clamps and braided stainless oil lines. Features: gains of up to 30 hp more* t 321 stainless steel mandrel bent 41 mm (1 5/8 inch) collector lef...(choose a part on the right to read more)
General Fitment 911 1989-94
From $4,064.04
Make a selection
Brombacher 997.2 tt "cat-back" (sound version) muffler for OEM cats
Facts:
- up to 25 crank hp & + 25 crank torque**
- reuses stock cats, perfect for those concerned about warranty.
- open muffler design for added power.
- tubing diameter is the same as the OEM system.
- weighs 19 lbs. (8,6 kg)
- t 316 stainless steel for improved durability over t 304.
- 5 on a scale of 1-10 in volume (1 being stock).
- includes cone and v band style hardware to prevent exhaust leaks.
- made in Germany.
- modular design for future 100 cell, 200 cell or bypass use.
- more distinguished growl at idle, partial throttle and wide open throttle.
- dme programming not necessary.
- reuses OEM tips.
**please note:t...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12
$2,805.00
Make a selection
Speed technologies over the years have become the leader in providing the daily 700hp plus driven Porsche 996tt with the proper exhaust and accessories. With 20 years of experiences, the result is a line of superior performing exhausts for a variety of Porsche automobiles.
Speedtech has engineered to have a rich, deep tone in the lower rpms and a pronounced flat six note at higher rpms. With this new designed speedtech adds substantial horsepower and torque gains, along with improved throttle response are achieved with the free flowing, unrestrictive 70mm design. The 70mm tubing is utilized throughout, including the outlet pipes, which reduces back pressure and enables quick turbo response. The speedtech ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$3,233.25
Make a selection
Having the perfect sounding exhaust system that helps gain power is not the easiest task at hand. turbocharged cars do not need any backpressure and ideally perform best with no restriction off of the turbo exhaust outlet. however, this would cause your car to be incredibly loud and not comfortable for daily use. agency power has developed this exhaust system to give Porsche 997 turbo owners a race tone exhaust without the dreaded drone in the 2200-2800 rpm range. the muffler system is designed to keep noise level down inside the cabin but roar at full throttle. the exhaust features high flow 200 cell catalytic converters. the cats work with the factory o2 primary and secondary sensors to not throw a che...(choose a part on the right to read more)
General Fitment 911 2005-08
$2,999.95
Make a selection
No need for Porsche sport exhaust (pse) envy with this muffler! This offers weight savings and a far more exotic sound than the pse, all without drone. It is the perfect compromise for you and your loved ones. Rich, deep, turbo motorsport tones with the valves open and soft subtle, completely stock sounds with them closed. Top of the line or range depending on the english and is the best choice for a daily driver. Features: - + 16 crank hp & + 15 crank torque. - weighs 37 lbs. (17 kg) - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - direct bolt on replacement for the factory center muffler. - includes necessary installation hardware. - reduces turbo lag, backpressure and thermal lo...(choose a part on the right to read more)
$4,651.90
Make a selection
Brombacher 997 tt (super sound version) stainless steel exhaust system
Facts:
- + 35 crank hp & + 25 crank torque (if pressure sensor is adjusted via software)**
- catalytic bypass
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purcha...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12 911 TURBO/GT2 2007-09
$2,117.50
Make a selection
Stoptech recognizes that great brakes need to look as good as they perform. Performance wheels and tires are best complemented with stoptech sport drilled & slotted rotors.every sportstop brake rotor is produced from a high quality centric parts blank casting and finished in a durable e-coating for corrosion resistance. Sportstop drilled and slotted brake rotors (prefix 127) prevent glazing of the pads, add bite and improve wet and dry braking performance.every sportstop rotor is finished with black e-coating on both sides of the hat, inside the the cooling vanes, and on the outside edge. E-coating is a superior electro-statically applied finish designed to withstand 400 hours of salt water exposure without rus...(choose a part on the right to read more)
General Fitment 911 1984-86 911 1987-89 911 1989-94
Brombacher 997 tt (TUV version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque (with FVD software)**
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purchased seperately. They are "quad" 3.5" (90/100mm) tips and ar...(choose a part on the right to read more)
General Fitment 911 2005-08
$5,230.50
Make a selection
Product details:
Great sports car sound with increased power and significant reduction in turbo lag
Features:
-fits all Porsche 911 turbo 930 vehicles (1976-1989)
-adds 15 whp for improved throttle response
-improved sports car sound with a much deeper, more aggressive exhaust note
-constructed with 3.0" 14-16 gauge t304l c.n.c. Mandrel bent stainless steel tubing for maximum performance and durability
-maxflo mufflers are radius stress relieved, hydro-formed cases that are pulse tig welded with 2000 degree ceramic fiber and stainless steel wool packing.
-available in single or dual outlet configuration
...(choose a part on the right to read more)
General Fitment 930 1975-77 911 1978-83 911 1984-86 911 1987-89
From $1,395.00
Make a selection
Product details:
Great sports car sound with increased power and significant reduction in turbo lag
Features:
-fits all Porsche 911 turbo 930 vehicles (1976-1989)
-adds 15 whp for improved throttle response
-improved sports car sound with a much deeper, more aggressive exhaust note
-constructed with 3.0" 14-16 gauge t304l c.n.c. Mandrel bent stainless steel tubing for maximum performance and durability
-maxflo mufflers are radius stress relieved, hydro-formed cases that are pulse tig welded with 2000 degree ceramic fiber and stainless steel wool packing.
-available in single or dual outlet configuration
...(choose a part on the right to read more)
General Fitment 930 1975-77 911 1978-83 911 1984-86 911 1987-89
From $1,995.00
Make a selection
Product details:
Complete high-performance exhaust & intake solution for the 911 turbo 930; includes dual outlet muffler with dual or quad style deluxe tips, sport headers with heat and air intake system.
Includes:
-911 turbo (930) dual outlet muffler (incl. Deluxe dual or quad style tips)
-911 turbo (930) sport headers with heat
-911 turbo (930) air intake system
Features:
-fits all Porsche 911 turbo 930 vehicles (1976-1989)
-increases horsepower and torque by 46 whp and 33 ft-lbs
-dramatically improves sports car sound with a deeper exhaust note.
-constructed from t304 stainless steel, 14-16 gauge c.n.c. Mandrel bent high v...(choose a part on the right to read more)
General Fitment 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89
From $4,050.00
Make a selection
Product details:
Replaces the restrictive factory catalytic converters with much less restrictive straight-through pipes for maximum flow and performance
Features:
-fits all Porsche 957 Cayenne turbo/ turbo s vehicles (2008-2010)
-increases horsepower and torque by 27 whp and 22 ft-lbs
-saves 24 lbs from the vehicle versus bulky and restrictive factory catalytic converters
-fabspeed's secondary cat bypass pipes replace the restrictive factory catalytic converters with much less restrictive straight-through pipes for maximum flow and performance.
-direct bolt-on replacement for the heavy fact...(choose a part on the right to read more)
General Fitment CAYENNE 2007-10
From $795.00
Make a selection
Product details:
Increase exhaust flow from the headers to the mufflers and improving power and sound by replacing the catalytic converters with straight-through pipes
Features:
-fits all Porsche 944 turbo 951 vehicles (1985-1991)
-increases horsepower and torque by 26 whp and 29 ft-lbs
-constructed from cnc mandrel-bent t304l stainless steel
-direct replacement for the factory catalytic converters
-bolt-on installation
-all fabspeed performance products are backed by the fabspeed lifetime limited warranty
General Fitment 944 1985-88 944 1989-91
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|